3.5.50~g271165a from git, can't subscribe to channels/services
Added by Christian Herzog over 11 years ago
Hello!
I just compiled the latest version (3.5.50~g271165a) from git. I can scan for services (finds ~1600 on Asta 19,2E) however I can't map or subscribe to them. All I get is no input detected and/or grace period exceeded. Under the Status tab, I see the value in the "State" column jumping between "Testing" and "Bad" until the grace period is exceeded.
I'm currently running 3.5.23~g4724e01 which works fine. Is this a known problem or did I overlook something?
best regards
Replies (4)
RE: 3.5.50~g271165a from git, can't subscribe to channels/services - Added by Peter Vágner over 11 years ago
For me this is even worse. While updating from older version with already scanned channels I cant subscribe like the original reporter however after trying to start from scratch wiping all the settings and setting up everything manually I cant scan for services.
Here is log output while scanning. I am sure one of these has valid channels...
mar 10 19:23:04 [ DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,525,000 kHz Vertical (No satconf)" (1925000, 27500000 Baud, 3/4, SYS_DVBS, QPSK) for Initial autoscan
mar 10 19:23:04 [ DEBUG]:viasat_baltic: install table handlers
mar 10 19:23:04 [ DEBUG]:uk_freesat: install table handlers
mar 10 19:23:04 [ DEBUG]:eit: install table handlers
mar 10 19:23:05 [ DEBUG]:dvb: "12,525,000 kHz Vertical (No satconf)" on adapter "ST STV0299 DVB-S", status changed to OK
mar 10 19:23:24 [ DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,525,000 kHz Horizontal (No satconf)" (1925000, 27500000 Baud, 3/4, SYS_DVBS, QPSK) for Initial autoscan
mar 10 19:23:24 [ DEBUG]:viasat_baltic: install table handlers
mar 10 19:23:24 [ DEBUG]:uk_freesat: install table handlers
mar 10 19:23:24 [ DEBUG]:eit: install table handlers
mar 10 19:23:29 [ DEBUG]:dvb: "12,525,000 kHz Horizontal (No satconf)" on adapter "ST STV0299 DVB-S", status changed to Faint signal
mar 10 19:23:41 [ DEBUG]:dvb: "12,525,000 kHz Horizontal (No satconf)" on adapter "ST STV0299 DVB-S", status changed to Bad signal
EDIT!
This is how it looks like if it can actually scan something....
mar 10 19:55:28 [DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,525,000 kHz Vertical (No satconf)" (1925000, 27500000 Baud, 3/4, SYS_DVBS, QPSK) for Initial autoscan
mar 10 19:55:28 [DEBUG]:viasat_baltic: install table handlers
mar 10 19:55:28 [DEBUG]:uk_freesat: install table handlers
mar 10 19:55:28 [DEBUG]:eit: install table handlers
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f41" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f42" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f43" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f44" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f45" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f46" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f47" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f48" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f52" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f53" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f54" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f55" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f56" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f57" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f58" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f59" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f5a" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f5b" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f5c" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:dvb: Add service "_dev_dvb_adapter0_ST_STV0299_DVB_S12525000_V_1f5d" on "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:28 [DEBUG]:eit: begin processing
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 4) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 14) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 3) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 28) updated, PCR PID changed, New elementary stream
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 24) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 28) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 28) updated, PCR PID changed, New elementary stream
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 8) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 29) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 4) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 9) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 4) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 28) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 6) updated, PCR PID changed, New elementary stream, Language changed, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 27) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 11) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 27) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 30) updated, PCR PID changed, New elementary stream, Language changed
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 9) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:28 [DEBUG]:PSI: Service "ST STV0299 DVB-S/12,525,000 kHz Vertical (No satconf)" PMT (version 8) updated, PCR PID changed, New elementary stream, Language changed, New CA stream, New CAID, PIDs reordered
mar 10 19:55:29 [DEBUG]:dvb: "12,525,000 kHz Vertical (No satconf)" on adapter "ST STV0299 DVB-S", status changed to OK
mar 10 19:55:38 [DEBUG]:dvb: "/dev/dvb/adapter0" initial scan completed for "12,525,000 kHz Vertical (No satconf)"
mar 10 19:55:38 [DEBUG]:eit: processing cancelled
RE: 3.5.50~g271165a from git, can't subscribe to channels/services - Added by Dave Chapman over 11 years ago
Can you update to the latest git master? This is a known issue and hopefully was fixed a couple of hours ago.
RE: 3.5.50~g271165a from git, can't subscribe to channels/services - Added by Peter Vágner over 11 years ago
I have updated and viewing works fine now.
I havent tried scanning yet.
thx
Edit:
Services are now coming up. Not all of them were mapped to channels however I will retry as I might have screwed something my-self. I was tinkering with other settings while the initial scan was in progress.
RE: 3.5.50~g271165a from git, can't subscribe to channels/services - Added by Christian Herzog over 11 years ago
Just updated to the latest master and it seems to work fine again.