Project

General

Profile

Problem tune UPC Direct provider

Added by Pavel Mlcoch over 12 years ago

I've problem with tune my DVB-S provider on 0,8W. When I tried tune it by kaffeine, I get some muxes, but UPS Direct not. When I use dreambox, I tune all progs without problems. But when I add mux manualy by information at http://www.lyngsat.com/tvchannels/cz/CT-24.html or http://www.linowsat.de/cgi-bin/lsat.cgi?3590-12073-V-706-0-0 my tvheadend says "No signal". Know someone where I can search the problem?

bash-4.2$ tvheadend -C -d
[INFO]:dvb: Found adapter /dev/dvb/adapter0 (STB0899 Multistandard) via PCI
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,687,000 kHz Vertical (Default (Port 0, Universal LNB))" (2087000, 27500000 Baud, 3/4, SYS_DVBS, QPSK)
[INFO]:dvr: Creating new configuration ''
[WARNING]:dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/home/pavka/Videos". This can be changed from the web user interface.
[INFO]:CSA: Using SSE2 128bit parallel descrambling
[NOTICE]:START: HTS Tvheadend version 2.12 started, running as PID:4367 UID:1000 GID:1000, settings located in '/home/pavka/.hts/tvheadend'
[DEBUG]:AVAHI: Adding service 'Tvheadend'
[INFO]:AVAHI: Service 'Tvheadend' successfully established.
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,073,000 kHz Vertical (Default (Port 0, Universal LNB))" (1473000, 28000000 Baud, 7/8, SYS_DVBS, QPSK)
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,687,000 kHz Vertical (Default (Port 0, Universal LNB))" (2087000, 27500000 Baud, 3/4, SYS_DVBS, QPSK)
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,073,000 kHz Vertical (Default (Port 0, Universal LNB))" (1473000, 28000000 Baud, 7/8, SYS_DVBS, QPSK)
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,687,000 kHz Vertical (Default (Port 0, Universal LNB))" (2087000, 27500000 Baud, 3/4, SYS_DVBS, QPSK)
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,073,000 kHz Vertical (Default (Port 0, Universal LNB))" (1473000, 28000000 Baud, 7/8, SYS_DVBS, QPSK)
[DEBUG]:dvb: "/dev/dvb/adapter0" tuning via s2api to "12,687,000 kHz Vertical (Default (Port 0, Universal LNB))" (2087000, 27500000 Baud, 3/4, SYS_DVBS, QPSK)
^C[NOTICE]:STOP: Exiting HTS Tvheadend

bash-4.2$ cat dvbadapters/_dev_dvb_adapter0_STB0899_Multistandard {
"type": "DVB-S",
"displayname": "STB0899 Multistandard",
"autodiscovery": 1,
"idlescan": 1,
"qmon": 1,
"dump_muxes": 0,
"nitoid": 0,
"diseqc_version": 0
}
bash-4.2$ cat dvbsatconf/_dev_dvb_adapter0_STB0899_Multistandard/1 {
"id": "1",
"port": 0,
"name": "Default (Port 0, Universal LNB)",
"comment": "Default satconf entry",
"lnb": "Universal"
}
dev_dvb_adapter0_STB0899_Multistandard12687000_V_satconf_1
_STB0899_Multistandard12073000_V_satconf_1 B0899_Multistandard/_dev_dvb_adapter0
{
"quality": 0,
"enabled": 1,
"status": "No signal",
"transportstreamid": 65535,
"frequency": 12073000,
"symbol_rate": 28000000,
"fec": "7/8",
"polarisation": "Vertical",
"modulation": "QPSK",
"delivery_system": "SYS_DVBS",
"rolloff": "ROLLOFF_35",
"satconf": "1"
}

bash-4.2$ lspci | grep TV
01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)

bash-4.2$ cat /etc/redhat-release
Fedora release 16 (Verne)