Transponder Error and Continuity Errors making my video stream useless
Added by stefan ott over 2 years ago
Hi everyone,
I am getting lots of Transponder Error and Continuity Errors ( 28000 and more)when both tuners are active.. impact is: when i stream 1 channel i get loads of artifacts in my stream .. up to completely messed up video.. or more a still picture with 3 colors..
both tuners should work i guess according to linuxtv org /wiki/index.php/Hauppauge_WinTV-dualHD
when i turn one off i just get little numbers (like 23) in the errors.. which has no impact on the streamed video
i experienced this mainly on the low frequencies like 180-230 Mhz .. but also happened on the higher ones ..
another guy with the same stick/tuner showed me he is running 4 streams on lower freqiencies withou any errors..
so what might be wrong with my setup?
oh.. here is my dmesg from my system if that helps
pastebin pl /view/24cb1c3b
Tuner:
Hauppauge WinTV-dualHD 01590
Transfer Mode set to bulk
fimrware dvb-demod-si2168-b40-01.fw version 4.0.25
Client:
dream Player TV for TVheadend (Beta), Version 5.5.1 for Android TV
on a nVidia Shield TV Pro (2015) with SW Version 9.0.1
Server
TVHeadend Build: 4.3-2010~g3b1d7a928 (2022-03-15T10:50:53+0000)
on Ubuntu 20.04.4 LTS Desktop
on an Lenovo Thinkpad T450S
Replies (11)
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
no idea folks?
RE: Transponder Error and Continuity Errors making my video stream useless - Added by Dave Pickles over 2 years ago
You seem to have several USB devices on your system. How are they connected and how are they powered?
Your tuner has its transfer mode set to 'bulk'. Is this the default for this device or did you change it? If you changed it, how was the performance in Isochronous mode?
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
Hi
No, i have only 1 USB device attached: the tuner.(see attached pic)
it is powered by the usb port.
Else there is only the power-cord and a rj45 for the network attached.
the default transfer mode seams to be isochronous.
i changed it based on the documentation here to bulk: linuxtv org /wiki/index.php/Hauppauge_WinTV-dualHD
my observations say: the errors dropped down to 10% (about 3500 from previously 35000)
but there are still lots of errors on the tuners when i have both enabled.
disabling the "second" tuner, eliminates almost all errors
Image(4).jpeg (2.25 MB) Image(4).jpeg | Tuner pic 1 | ||
Image(3).jpeg (2.45 MB) Image(3).jpeg | Tuner pic 2 |
RE: Transponder Error and Continuity Errors making my video stream useless - Added by saen acro over 2 years ago
Try with powertop optimisation
Do not optimise anything with include USB in name
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
sorry, i did not get that ..
what do i do where?
RE: Transponder Error and Continuity Errors making my video stream useless - Added by saen acro over 2 years ago
Run powertop
there is tab "Tunables"
optimise all non USB devices
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
interesting tool +1
optimized everything except 4 entries that mentioned USB
side question: this optimization needs to be redone after a reboot, right?
however, seams not to help
Capture.PNG (4.76 KB) Capture.PNG | errors |
RE: Transponder Error and Continuity Errors making my video stream useless - Added by saen acro over 2 years ago
Check cables where signal come from.
If you have some amplifier, it can be one with generate noises.
Post links as links do not edit them /censorship is not needed/
What is signal type DVB-C or DVB-T?
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
cables should be fine:
- i live in a newly build home (3 years old now)
- cable goes straight from wall to tuner - no amplifiers
- using a high quality thick shielded cable
it is DVB-C
disabled DVB-T
the one with "OFF" in the name is just a reminder for me, so i know which one to disable, so i can use the setup at all
thank you for the hint with the links
Capture.PNG (25.4 KB) Capture.PNG |
RE: Transponder Error and Continuity Errors making my video stream useless - Added by stefan ott over 2 years ago
hmmm.. looks like the optimizations in powertop are also putting my laptop to sleep now after a while :(
did e reboot .. but still happening