Project

General

Profile

v4l adapter S-Video input

Added by Norbert Wirtz over 13 years ago

Is there a way to configure in tvheadend the S-Video input of a Haupauge PVR-350 for streaming a connected receiver?

The adpater is detected by tvheadend. The mplayer show the /dev/video0 stream.

We have no idea how to configere the PVR-350 unter the tabs "General" and "Services"

Gruß
Norbert

root@wico-tvhe-01:/home/hts/.hts/tvheadend/v4ladapters# v4l2-ctl -n

ioctl: VIDIOC_ENUMINPUT

Input   : 0
Name    : Tuner 1
Type    : 0x00000001
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x000000000000000F ( PAL )
Status  : 0
Input   : 1
Name    : S-Video 1
Type    : 0x00000002
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status  : 0
Input   : 2
Name    : Composite 1
Type    : 0x00000002
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status  : 0
Input   : 3
Name    : S-Video 2
Type    : 0x00000002
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status  : 0
Input   : 4
Name    : Composite 2
Type    : 0x00000002
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status  : 0
Input   : 5
Name    : Composite 3
Type    : 0x00000002
Audioset: 0x00000007
Tuner   : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status  : 0

root@wico-tvhe-01:/home/hts/.hts/tvheadend/v4ladapters# v4l2-ctl --log-status

Status Log:

[47542.461550] ivtv0: =================  START STATUS CARD #0  =================
[47542.461554] ivtv0: Version: 1.4.1 Card: Hauppauge WinTV PVR-350
[47542.514524] tveeprom 1-0050: Hauppauge model 48139, rev K5B7, serial# 11664286
[47542.514527] tveeprom 1-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 38)
[47542.514530] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
[47542.514533] tveeprom 1-0050: audio processor is MSP4418 (idx 25)
[47542.514534] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[47542.514536] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[47542.514539] saa7115 1-0021: Audio frequency: 48000 Hz
[47542.516286] saa7115 1-0021: Input:           S-Video 0
[47542.516288] saa7115 1-0021: Video signal:    bad
[47542.516289] saa7115 1-0021: Frequency:       50 Hz
[47542.516290] saa7115 1-0021: Detected format: BW/No color
[47542.516292] saa7115 1-0021: Width, Height:   480, 576
[47542.516294] saa7127 1-0044: Standard: 50 Hz
[47542.516295] saa7127 1-0044: Input:    normal
[47542.516297] saa7127 1-0044: Output:   S-Video + Composite
[47542.516298] saa7127 1-0044: WSS:      disabled
[47542.516300] saa7127 1-0044: VPS:      disabled
[47542.516301] saa7127 1-0044: CC:       disabled
[47542.517762] msp3400 1-0040: msp3400 rev1 = 0x0317 rev2 = 0x1244
[47542.517764] msp3400 1-0040: Audio:    volume 58981
[47542.517766] msp3400 1-0040: Mode:     External input
[47542.517768] msp3400 1-0040: Audmode:  0x0003
[47542.517770] msp3400 1-0040: Routing:  0x00222220 (input) 0x00000044 (output)
[47542.517772] msp3400 1-0040: ACB:      0x0c00
[47542.517775] tda9887 1-0043: Data bytes: b=0x14 c=0x70 e=0x49
[47542.517778] tuner 1-0061: Tuner mode:      analog TV
[47542.517780] tuner 1-0061: Frequency:       1.25 MHz
[47542.517782] tuner 1-0061: Standard:        0x000000ff
[47542.517785] ivtv0: Video Input:  S-Video 1
[47542.517786] ivtv0: Audio Input:  Line In 1
[47542.517788] ivtv0: Video Output: S-Video + Composite
[47542.517790] ivtv0: Audio Output: A/V Audio Out (Stereo/Bilingual: Stereo/Left)
[47542.517792] ivtv0: Output Mode:  None
[47542.517937] ivtv0: Overlay:      Off, Alpha: Global, Pixel Format: ARGB 8:8:8:8
[47542.517939] ivtv0: Tuner:  TV
[47542.517941] ivtv0: Stream: MPEG-2 Program Stream
[47542.517943] ivtv0: VBI Format: No VBI
[47542.517945] ivtv0: Video:  480x576, 25 fps
[47542.517947] ivtv0: Video:  MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 6000000
[47542.517950] ivtv0: Video:  GOP Size 12, 2 B-Frames, GOP Closure
[47542.517953] ivtv0: Audio:  48 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No Emphasis, No CRC
[47542.517957] ivtv0: Spatial Filter:  Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
[47542.517959] ivtv0: Temporal Filter: Manual, 8
[47542.517961] ivtv0: Median Filter:   Off, Luma [0, 255], Chroma [0, 255]
[47542.517963] ivtv0: Status flags:    0x00200080
[47542.517965] ivtv0: Stream encoder MPG: status 0x0000, 0% of 4096 KiB (128 buffers) in use
[47542.517968] ivtv0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (64 buffers) in use
[47542.517970] ivtv0: Stream encoder VBI: status 0x0000, 0% of 1049 KiB (41 buffers) in use
[47542.517972] ivtv0: Stream encoder PCM: status 0x0000, 0% of 324 KiB (72 buffers) in use
[47542.517975] ivtv0: Stream decoder MPG: status 0x0000, 0% of 1024 KiB (16 buffers) in use
[47542.517977] ivtv0: Stream decoder VBI: status 0x0000, 0% of 65 KiB (29 buffers) in use
[47542.517980] ivtv0: Stream decoder YUV: status 0x0000, 0% of 1024 KiB (16 buffers) in use
[47542.517982] ivtv0: Read MPG/VBI: 3622848/0 bytes
[47542.517983] ivtv0: ==================  END STATUS CARD #0  ==================

root@wico-tvhe-01:/home/hts/.hts/tvheadend/v4ladapters#


Replies (1)

RE: v4l adapter S-Video input - Added by xternal xternal over 13 years ago

did you ever find a solution to this? same issue but with an hdpvr

    (1-1/1)