minisatip + tvheadend scan failing
Added by Mr Johnzered almost 3 years ago
Hi,
I have a setup with minisatip + tvheadend. I have minisatip installed on computer A, and tvheadend installed on computer B.
If I try to scan for muxes in tvheadend (computer B) scanning fails with the following error:
2021-11-25 20:22:28.985 mpegts: 242MHz in MyDVBCNetwork - tuning on SAT>IP DVB-C Tuner #1 (192.168.10.21@UDP) 2021-11-25 20:22:28.985 subscription: 0008: "scan" subscribing to mux "242MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #1 (192.168.10.21@UDP)", network: "MyDVBCNetwork", service: "Raw PID Subscription" 2021-11-25 20:22:33.985 mpegts: 242MHz in MyDVBCNetwork - scan no data, failed 2021-11-25 20:22:33.985 subscription: 0008: "scan" unsubscribing
If however I scan muxes with another dvb-c card attached directly to computer B i'm then able to tune channels using minisatip as well except for one mux giving the following error:
2021-11-25 20:35:30.441 subscription: 00DC: "HTTP" subscribing on channel "Yle TV1 HD", weight: 100, adapter: "SAT>IP DVB-C Tuner #1 (192.168.10.21@UDP)", network: "MyDVBCNetwork", mux: "178MHz", provider: "Yleisradio", service: "Yle TV1 HD", profile="webtv-h264-aac-matroska", hostname="...", username="...", client="..." 2021-11-25 20:35:35.441 subscription: 00DC: service instance is bad, reason: No input detected 2021-11-25 20:35:36.441 mpegts: 178MHz in MyDVBCNetwork - tuning on SAT>IP DVB-C Tuner #1 (192.168.10.21@UDP) 2021-11-25 20:35:36.441 subscription: 00DE: "epggrab" subscribing to mux "178MHz", weight: 4, adapter: "SAT>IP DVB-C Tuner #1 (192.168.10.21@UDP)", network: "MyDVBCNetwork", service: "Raw PID Subscription" 2021-11-25 20:35:38.441 subscription: 00DC: No input source available for subscription "HTTP" to channel "Yle TV1 HD" 2021-11-25 20:35:38.442 webui: Couldn't start streaming /stream/channel/6480980dc3ef7185812ab585517385ab?profile=webtv-h264-aac-matroska, No input detected 2021-11-25 20:35:38.442 subscription: 00DC: "HTTP" unsubscribing from "Yle TV1 HD", hostname="...", username="...", client="..."
If I install tvheadend on computer A, so that both tvheadend and minisatip are on the same machine, I'm able to scan muxes and also watch all channels without problems.
Is this a tvheadend or minisatip problem?
Replies (4)
RE: minisatip + tvheadend scan failing - Added by D S almost 3 years ago
Hi,
I am having exactly the same problem. DVB-T works perfectly with the dongles connected to the machine via USB, but I have a satip on LAN and it does the same exact thing.
I had a working setup from 2 years ago but I had to format my server and now I can't make it to work.
I don't know if I have to configure anything special.
Thanks in advance if someone has the answer.
RE: minisatip + tvheadend scan failing - Added by Mr Johnzered almost 3 years ago
Hi,
In the meantime I tried NextPVR and connected to the same minisatip server and there scanning works as well as watching the channels. Of course it could still be an error in minisatip but NextPVR is however able to handle this so it feels more likely there's something in TVHeadend. Please tell me what more info you guys need to investigate this further.
RE: minisatip + tvheadend scan failing - Added by saen acro almost 3 years ago
Use SATPI in place of Minisatip
Else can be a driver's problem.
RE: minisatip + tvheadend scan failing - Added by D S almost 3 years ago
I have a xoro 8100 SATIP device.
Also a Digibit R1 with minisatip not working.
My tvh version is 4.3-1983~gb8710206e