Project

General

Profile

Panasonic TV

Added by Gurabli Gurabli over 4 years ago

Hi,
I just got a new Panasonic tv (65gx800) and it has a built in satip client mode.

I can't make ir work. I run Tvheadend in docker (modified network to host) and have Satip server in tvh enabled. Panasonic sees the Tvheadend server, but if I scan for DVB-C channels, nothing is found.
What I am doing wrong? Anybody managed to make this work? Saw some older comments that it should work.


Replies (10)

RE: Panasonic TV - Added by Poul Kalff over 4 years ago

Can you show us the docker build file?

RE: Panasonic TV - Added by Gurabli Gurabli over 4 years ago

Poul Kalff wrote:

Can you show us the docker build file?

Sure.
I have a remote satip (from minisatip) on 192.168.1.125 address, that is where I get the DVB-C adapters (it is a remote location). using Kodi it works perfectly fine.

  tvheadend:
    image: linuxserver/tvheadend:latest
    container_name: tvheadend
    restart: unless-stopped
#    ports:
#      - "9981:9981" 
#      - "9982:9982" 
#      - "554:554" 
    environment:
      - PUID=${PUID}
      - PGID=${PGID}
      - TZ=${TZ}
      - RUN_OPTS= --satip_xml http://192.168.1.125:8080/desc.xml
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - ${USERDIR}/docker/tvh:/config
      - ${USERDIR}/wd4tb/RecordTvh:/recordings
      - ${USERDIR}/docker/tvh/picons:/picons
    devices:
      - "/dev/dvb" 
      - "/dev/dri" 
    network_mode: "host" 

RE: Panasonic TV - Added by Poul Kalff over 4 years ago

I don't know the option "- RUN_OPTS= --satip_xml", but it is not clear to me how the container would know the address 192.168.1.125... If you exec into the container, can you ping it? What is the IP of the container itself?

Also, why do you not share any ports? How do you access the container?

RE: Panasonic TV - Added by Gurabli Gurabli over 4 years ago

The RUN_OPTS is to access the remote DVB-C minisatip server.
I don't publish ports since the network mode is set to HOST, since if I'm correct, SatIP server requires the container to be run as host. It doesn't work in bridge network mode. And in host network mode there is no need to publish any ports.

RE: Panasonic TV - Added by saen acro over 4 years ago

Docker do not support IP address itself its a pseudo virtualisation with mean sandboxed app

RE: Panasonic TV - Added by Gurabli Gurabli over 4 years ago

saen acro wrote:

Docker do not support IP address itself its a pseudo virtualisation with mean sandboxed app

Sorry, I don't get this. Is this related to the fact that my Panasonic can't see the Sati server?

RE: Panasonic TV - Added by Poul Kalff over 4 years ago

Gurabli Gurabli wrote:

The RUN_OPTS is to access the remote DVB-C minisatip server.
I don't publish ports since the network mode is set to HOST, since if I'm correct, SatIP server requires the container to be run as host. It doesn't work in bridge network mode. And in host network mode there is no need to publish any ports.

Ok, I have never used HOST networks, so I don't know, but again, can you ping the external network from within the container? Also, what does the docker logs tell? They would obviously tell whether or nor external networks are reachable

RE: Panasonic TV - Added by Poul Kalff over 4 years ago

Poul Kalff wrote:

Gurabli Gurabli wrote:

The RUN_OPTS is to access the remote DVB-C minisatip server.
I don't publish ports since the network mode is set to HOST, since if I'm correct, SatIP server requires the container to be run as host. It doesn't work in bridge network mode. And in host network mode there is no need to publish any ports.

Ok, I have never used HOST networks, so I don't know, but again, can you ping the external network from within the container? Also, what does the docker logs tell? They would obviously tell whether or nor external networks are reachable

Also, can you access the webinterface on 9981? Just to make sure that you are right about the ports not having to be mapped up on HOST networks?

RE: Panasonic TV - Added by Gurabli Gurabli over 4 years ago

Poul Kalff wrote:

Poul Kalff wrote:

Gurabli Gurabli wrote:

The RUN_OPTS is to access the remote DVB-C minisatip server.
I don't publish ports since the network mode is set to HOST, since if I'm correct, SatIP server requires the container to be run as host. It doesn't work in bridge network mode. And in host network mode there is no need to publish any ports.

Ok, I have never used HOST networks, so I don't know, but again, can you ping the external network from within the container? Also, what does the docker logs tell? They would obviously tell whether or nor external networks are reachable

Also, can you access the webinterface on 9981? Just to make sure that you are right about the ports not having to be mapped up on HOST networks?

Yes, I can access the web interface and also ping everything. HOST network mode is new to me as well, never used it before.
Hm, could it be that port 554 can't be used since no root access in container, therefore the port defaults to 9983? Maybe Panasonic requires this?
If I run minisatip than TV finds it immediatelly and scans for channels. But I would so much like to use TVH, especially for the recording backend support.

RE: Panasonic TV - Added by Poul Kalff over 4 years ago

Gurabli Gurabli wrote:

Poul Kalff wrote:

Poul Kalff wrote:

Gurabli Gurabli wrote:

The RUN_OPTS is to access the remote DVB-C minisatip server.
I don't publish ports since the network mode is set to HOST, since if I'm correct, SatIP server requires the container to be run as host. It doesn't work in bridge network mode. And in host network mode there is no need to publish any ports.

Ok, I have never used HOST networks, so I don't know, but again, can you ping the external network from within the container? Also, what does the docker logs tell? They would obviously tell whether or nor external networks are reachable

Also, can you access the webinterface on 9981? Just to make sure that you are right about the ports not having to be mapped up on HOST networks?

Yes, I can access the web interface and also ping everything. HOST network mode is new to me as well, never used it before.
Hm, could it be that port 554 can't be used since no root access in container, therefore the port defaults to 9983? Maybe Panasonic requires this?
If I run minisatip than TV finds it immediatelly and scans for channels. But I would so much like to use TVH, especially for the recording backend support.

I am unsure of what you mean.... Why would it matter to port 554 that you have no root access? But if you suspect this, just recreate the container with PID 1000 to test it.
I think it is quite likely that this problem has to do with wrong ports (it always is with access problems... ), but you'll have to use a port tool to test from within the container, like nc or telnet. I have no TV with support for iptv, so I can't really help with that.
Also, in your setup, the port to communicate on from container is 8080 (rather than 80), why is that? Have you tested connection on this port from within container? What is port 554 used for? I don't have that set up in my setup (I only use 9981)

    (1-10/10)