Project

General

Profile

Forums » General »

TVHeadend Master/Slave 4.3-1857

Added by Manfred Engleitner over 4 years ago

Hey Guys,

TVHeadend is a realy good piece of software.

Since short I have a problem with my master/slave configuration and I´m afraid, that the new version is causing the problem. In my feeling the world around TVHeadend did not change, and in the old version 4.3-1811/1819 (the exact number I forgot) and versions before it was working for a longer period of time.

Short description of my setup:
On both systems is Linux xxx 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64 the base.

At the slave RTSP Port 9983 is activated and the network "Slave" is "The SAT>IP source number" 1.
The http://xxx.xxx.xxx.xxx:9981/satip_server/desc.xml shows the typical XML-site where in row 12 is <modelDescription>Tvheadend 4.3-1857~g221c29b40</modelDescription>.

At the master I use TVHEADEND_OPTIONS="--satip_xml http://xxx.xxx.xxx.xxx:9981/satip_server/desc.xml" in the file /etc/default/tvheadend.
There are two networks configured "Master" and "Slave" and the network "Slave" has the "The SAT>IP source number" 1. The remote TV-Adapter is shown and configurated without "Schneller Eingangswechsel" something like fast inputchange. I tried to switch the ui to englisch and restarted TVHeadend but the language of the ui stays in German.

For debugging purposes I activated "subscription,satip".
2020-02-28 05:48:03.014 [ INFO]:subscription: 0273: "epggrab" subscribing to mux "11582.25H", weight: 4, adapter: "SAT>IP DVB-S Tuner #1 (xxx.xxx.xxx.xxx:9983@TCP)", network: "Slave", service: "Raw PID Subscription"
2020-02-28 05:48:08.015 [WARNING]:satip: SAT>IP DVB-S Tuner #1 (xxx.xxx.xxx.xxx:9983@TCP) - no data received, restarting RTSP
As I can see, the request is sent to the Slave but then no answer is coming back.
A few hours of Google... I´m lost here.

Switching to a channel is with both instances via ui possible.

How can I debug further?
Please be so kind and support me!

Greetings
Manfred


Replies (10)

RE: TVHeadend Master/Slave 4.3-1857 - Added by saen acro over 4 years ago

Are both system in same lan or they are remote?
Why not iptv transfer betwin both?

RE: TVHeadend Master/Slave 4.3-1857 - Added by Manfred Engleitner over 4 years ago

Thanks for your fast response saen acro - I´ve seen your name often in posts when searching for information.

The two server are in the same lan - until the new version it was working properly. In normal circumstances i would downgrade...
I have no problems to use other ways, specially when they work :).

A short further explanaition of my system. Serverside I use TVHeadend and on clientside I use 5 Kodi-Clients (2 x LibreELEC [RPI3, RPI4], 1 x Kodi 16 cause of Android 4.4 on Xoro MegaPad 1851, 2 x Kodi 18.5 on Android) with HTSP.
The functionality with recording is used excessive (my wife loves Navi CIS, Mentalist, Castle, Conan...). During recording it´s nice to see other channels without any special configuration - only switch to the channel and TVHeadend is doing the rest. I call it the "wife acceptance factor". With TS-Doctor I cut out the commercials and transcode to H.265 with XMedia Recode.

I searched within tvheadend.org/Google with the two buzzwords "iptv Transfer"...
I also tried to add a new Network under DVB-Inputs within TVHeadend (IPTV Automatik Network and IPTV Network) but it is hard to grab the needed information.

Could you please provide me with further Details?

Thank you very much in advance!

RE: TVHeadend Master/Slave 4.3-1857 - Added by saen acro over 4 years ago

How many tuners you have on what system's

RE: TVHeadend Master/Slave 4.3-1857 - Added by Manfred Engleitner over 4 years ago

I have two systems with DVB-Inputs on "Linux xxx 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64" in different rooms, because the antenna for DVB-S2 is in these rooms.
For the network I use 6 TP-Link Powerline Adapters, because laying cables is a bigger effort in the rentet flat.

One adapter is a DVBSKY 952 Dual S2
Hardware for this system:
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Integrated Graphics Controller (rev 0b)
00:0e.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster (rev 0b)
00:0f.0 Communication controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Trusted Execution Engine (rev 0b)
00:12.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller (rev 0b)
00:13.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #1 (rev fb)
00:13.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #2 (rev fb)
00:13.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #3 (rev fb)
00:13.3 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #4 (rev fb)
00:15.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI (rev 0b)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface (rev 0b)
00:1f.1 SMBus: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SMBus Controller (rev 0b)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04)

and the other is a PCTV DVB S2 461e stick
Hardware on this System:
00:00.0 Host bridge: Intel Corporation Device 31f0 (rev 03)
00:00.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant (rev 03)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 605 (rev 03)
00:0e.0 Audio device: Intel Corporation Device 3198 (rev 03)
00:0f.0 Communication controller: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface (rev 03)
00:12.0 SATA controller: Intel Corporation Device 31e3 (rev 03)
00:13.0 PCI bridge: Intel Corporation Device 31d8 (rev f3)
00:13.1 PCI bridge: Intel Corporation Device 31d9 (rev f3)
00:13.2 PCI bridge: Intel Corporation Device 31da (rev f3)
00:13.3 PCI bridge: Intel Corporation Device 31db (rev f3)
00:15.0 USB controller: Intel Corporation Device 31a8 (rev 03)
00:1f.0 ISA bridge: Intel Corporation Device 31e8 (rev 03)
00:1f.1 SMBus: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model (rev 03)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)

RE: TVHeadend Master/Slave 4.3-1857 - Added by saen acro over 4 years ago

Answer more shortly and concentrated.
So you have 3 tuners total?

RE: TVHeadend Master/Slave 4.3-1857 - Added by saen acro over 4 years ago

How is set tuner on SAT>IP server side.

RE: TVHeadend Master/Slave 4.3-1857 - Added by saen acro over 4 years ago

Zero orientation.
Where and how is conected cables from dishe's to tuners?

RE: TVHeadend Master/Slave 4.3-1857 - Added by Manfred Engleitner over 4 years ago

In my oppinion a security update was the origin for the Problems.
After a few days without doing anything it is working properly again.
Only unattanded updates are active.

Thanks for your time!!!

    (1-10/10)