specinv = "do not use" leads to specinv=0
specinv = "do not use" leads to specinv=0Added by Clemens Hofbauer almost 6 years ago
Hi,
just tried to get tvheadend to run with a sat-ip tuner and it nearly works.
My System is:
Tvheadend 4.3-1696~gfb1109034
Debian Strech
FRITZ!WLAN Repeater DVB-C (FritzOS 7.01)
The solution for my first Problem was to use 6900000 Sym/s instead of 6900 Sym/s
Now most of the muxes works, but a few doesn't.
Some debugging showed, that the working muxes need specinv=1, which is configured in tvh.
The other muxes would need specinv=0, but this is to be configured tuner-based and not mux based.
I tried to ommit the specinv parameter in the m3u playlist, which you can download from the webinterface of the Fritz-Tuner and it works.
So I think without this parameter, it should work. (as other described with "do not use")
But my problem is, if I use the "do not use" it leads to specinv=0.
2019-01-03 22:51:44.497 [ TRACE]:satip: 002B: SETUP params - fe=2&freq=522&sr=6900&msys=dvbc&mtype=256qam&fec=35&specinv=0&pids=0,21
Has anybody else got this problem?