OSCAM problem Channels are not getting bright
Added by Thomas xyz over 7 years ago
hi I put on my Cubitruck with armbian (Linux cubietruck 4.18.8 Sunxi # 256 SMP Wed Sep 19 10:17:26 CEST 2018 armv7l GNU / Linux) a TVH server, I use the main WinTVDual DVB-C stick to it. The unencrypted stations such. RTL work without problems, only the encrypted ones like eg. Pro7 HD are not bright. The Oscam server is also running on the Cubietruck, all clients (VU +) are also bright, but not my TVH client on my Wetek Play2, so I exclude a fundamental Oscam Fehl configuration, it must somehow with the TVH Server hang together, if I install the TVH server on the Wetek Play 2, then everything will be bright, so it must actually hang with the TVH server on the Cubitruck together. One an idea what the problem could be?
Konfuguriert is on the TVH server newcamd as seen in the picture in the appendix, with exactly this configuration, everything is bright when I install the server on the WP2. In the TVH log is the following
2018-12-08 12:12:40.655 mpegts: 130MHz in Kevag - tuning on Silicon Labs Si2168 #1 : DVB-C #0 2018-12-08 12:12:40.656 subscription: 0040: "192.168.188.25 [ kodi | Kodi Media Center ]" subscribing on channel "ProSieben HD", weight: 150, adapter: "Silicon Labs Si2168 #1 : DVB-C #0", network: "Kevag", mux: "130MHz", provider: "Digital Free", service: "ProSieben HD", profile="htsp", hostname="192.168.188.25", username="kodi", client="Kodi Media Center" 2018-12-08 12:12:42.762 descrambler: cannot decode packets for service "ProSieben HD" 2018-12-08 12:12:43.583 cwc: Got unexpected ECM reply (seqno: 61) 2018-12-08 12:12:50.992 cwc: Got unexpected ECM reply (seqno: 62) 2018-12-08 12:12:52.740 descrambler: cannot decode packets for service "ProSieben HD" 2018-12-08 12:12:53.608 cwc: Can not descramble service "ProSieben HD", access denied (seqno: 63 Req delay: 10010 ms) from cwc-127.0.0.1-24241-1834
Thank you
| TVH_Server_Cubie.jpg (59.6 KB) TVH_Server_Cubie.jpg |
Replies (3)
RE: OSCAM problem Channels are not getting bright
-
Added by Thomas xyz over 7 years ago
Which version of oscam is build in TVH?
I usw HTS Tvheadend 4.2.2-dmo1+deb9u1 on my armbian, wehre can i find a actuelly version for arm
RE: OSCAM problem Channels are not getting bright
-
Added by Joe User over 7 years ago
What version of tvheadend? Same version on both?
What does oscam log show?
2018-12-08 12:12:53.608 cwc: Can not descramble service "ProSieben HD", access denied (seqno: 63 Req delay: 10010 ms) from cwc-127.0.0.1-24241-1834
with 10sec delay, not sure if it is bad data or no data.
show log with "--trace caclient,cwc"
RE: OSCAM problem Channels are not getting bright
-
Added by Thomas xyz over 7 years ago
Hi,
i think this is the problem
2018-12-12 05:50:19.125 cwc: Got unexpected ECM reply (seqno: 11) 2018-12-12 05:50:20.199 descrambler: cannot decode packets for service "ProSieben HD" 2018-12-12 05:50:21.048 tbl-base: bat: completed pid 17 table 00000048 / 000000f8 2018-12-12 05:50:25.988 cwc: Sending ECM (PID 6848) section=0/0, for service "ProSieben HD" (seqno: 13) 2018-12-12 05:50:25.996 cwc: Got unexpected ECM reply (seqno: 12) 2018-12-12 05:50:26.741 linuxdvb: Silicon Labs Si2168 #0 : DVB-C #0 - poll TIMEOUT 2018-12-12 05:50:30.174 descrambler: cannot decode packets for service "ProSieben HD" 2018-12-12 05:50:34.402 linuxdvb: Silicon Labs Si2168 #0 : DVB-C #0 - poll TIMEOUT
2018-12-12 05:51:46.015 epg: arm channel timer @ 2018-12-12;05:58:00(+0100) for RTL II HD 2018-12-12 05:51:46.862 epg: arm channel timer @ 2018-12-12;07:30:00(+0100) for RTL HD 2018-12-12 05:51:46.934 epg: arm channel timer @ 2018-12-12;07:05:00(+0100) for SPORT1+ HD 2018-12-12 05:51:46.991 epg: arm channel timer @ 2018-12-12;05:58:00(+0100) for RTL II HD 2018-12-12 05:51:47.431 cwc: Sending ECM (PID 6228) section=0/0, for service "SAT.1 HD" (seqno: 27) 2018-12-12 05:51:47.437 cwc: Got unexpected ECM reply (seqno: 26) 2018-12-12 05:51:47.831 epg: arm channel timer @ 2018-12-12;07:30:00(+0100) for RTL HD 2018-12-12 05:51:47.911 epg: arm channel timer @ 2018-12-12;07:05:00(+0100) for SPORT1+ HD 2018-12-12 05:51:47.961 linuxdvb: Silicon Labs Si2168 #1 : DVB-C #0 - poll TIMEOUT 2018-12-12 05:51:47.975 epg: arm channel timer @ 2018-12-12;05:58:00(+0100) for RTL II HD 2018-12-12 05:51:48.610 tbl-eit: eit: completed pid 18 table 00000000 / 00000000 2018-12-12 05:51:48.610 epggrab: grab done for 346MHz in Kevag (complete) 2018-12-12 05:51:50.615 descrambler: cannot decode packets for service "SAT.1 HD"
The TVH Server Version is HTS Tvheadend 4.2.2-dmo1+deb9u1
Configure arguments:
--build=arm-linux-gnueabihf --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=${prefix}/lib/arm-linux-gnueabihf --libexecdir=${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --enable-dvbcsa --disable-dvbscan --disable-hdhomerun_static --enable-hdhomerun_client --disable-ffmpeg_static
Compiler:
Using C compiler: cc
Using C flags: -g -O2 -fdebug-prefix-map=/build/tvheadend-dmo-4.2.2=. -fstack-protector-strong -Wformat -Werror=format-security
Using LD flags: -Wl,-z,relro -Wl,--as-needed -lhdhomerun -ldvbcsa -ldvben50221 -ldvbapi -lucsi
Build for arch: arm
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
pie yes
ccdebug no
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client yes
hdhomerun_static no
iptv yes
tsfile yes
dvbscan no
timeshift yes
trace yes
imagecache yes
avahi yes
zlib no
libav yes
ffmpeg_static no
libx264 yes
libx264_static yes
libx265 yes
libx265_static yes
libvpx yes
libvpx_static yes
libtheora yes
libtheora_static yes
libvorbis yes
libvorbis_static yes
libfdkaac yes
libfdkaac_static yes
nvenc no
qsv no
libmfx_static yes
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
pngquant no
dvbcsa yes
dvben50221 yes
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
slow_memoryinfo no
libsystemd_daemon no
bintray_cache yes
execinfo yes
W_unused_result yes
getloadavg yes
atomic64 yes
atomic_time_t yes
bitops64 yes
lockowner yes
qsort_r yes
stime yes
gmtoff yes
recvmmsg yes
sendmmsg yes
libdvben50221 yes
ifnames yes
py_gzip yes
bin_pkg_config yes
bin_xgettext yes
bin_msgmerge yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
libhdhomerun yes
upnp yes
inotify_h yes
inotify_init1 yes
linuxdvb_ca yes
epoll_create1 yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.1.0f
liburiparser 0.8.4
avahi-client 0.6.32
libavfilter 6.82.100
libswresample 2.7.100
libavresample 3.5.0
libswscale 4.6.100
libavformat 57.71.100
libavcodec 57.89.100
libavutil 55.58.100
dbus-1 1.10.18
Installation paths:
Prefix: /usr
Binaries: ${prefix}/bin
Libraries: /usr/lib/arm-linux-gnueabihf
Data files: ${prefix}/share
Man pages: /usr/share/man
and the Client Version is
TVH 4.4.4.2 on Wetek Play 2 with CoreElec
Attached the Trace Log