Add services for Ziggo (NL) [works great !]
Added by Alex . almost 13 years ago
[ SOLVED ]
Ok, I now 'upgraded' the firmware of the HD Homerun and within a few minutes the system starts to find services.....
(However, the hdhomerun worked with DVB-T, and the versionnumber of the firmware was the same as the new one, according to the gui, so probably there was some error in the firmware, or maybe the DVB-t version was loaded the first time? )
Anyway, ignore post below... For now i can continue :-)
[ ORIGINAL POST :]
Hi,
I am trying to get tv-headend to work with a HDHomerun via the DVBHDHomerun kernelmodule + userspace application.
The hdhomerun works fine for DVB-T with Tvheadend and OScam).
My provider is Ziggo , and I see on this forum that there has been successtories with Ziggo in the past.
However, I can't seem to find any services.
I added all the muxes manually, switched off idlescanning and auto-detect, and added the NIT-O code 5555 ( for my postalcode 22** which should be ok according to the Ziggo manual).
No or only limited services are found; Before I proceed with descrambling I would first like to at least see NL1 (which is the only FTA service on Ziggo) for testing, but no services are detected on that frequency.
What can I do to add services ?
Should I just wait longer ? ( and what is the typical time for all the service info to be broadcasted by Ziggo? )
Or should they be added in an entire different way ? ( manually entry somewhere ? )
Thanks for any pointers or directions.
Alex.
Replies (1)
RE: Add services for Ziggo (NL) - Added by Alex . almost 13 years ago
As a follow-up on my earlier problems: Everything works great right now !
Got all 'Ziggo' services (three hundred something), and can watch and record them. Same for DVB-T (Digitenne) (all together in tvheadend; my system has one dual tuner hdhomerun and one single tuner Pinnacle 72e dvb-t tuner).
TVheadend works great, thanks for this really nice piece of software!
Alex.
Alex. _ wrote:
[ SOLVED ]
Ok, I now 'upgraded' the firmware of the HD Homerun and within a few minutes the system starts to find services.....
(However, the hdhomerun worked with DVB-T, and the versionnumber of the firmware was the same as the new one, according to the gui, so probably there was some error in the firmware, or maybe the DVB-t version was loaded the first time? )
Anyway, ignore post below... For now i can continue :-)