Project

General

Profile

Tv Adapter change in Configuration Tab after some time

Added by Heinz Bär over 6 years ago

Hi,

after setting up TV-Headend (Build: 4.2.5) on my J1900-Box (running Arch Linux) together with a "TechnoTrend Budget S2-4200 Twin" everything did work.
Now after a few weeks and a few reboots later I see a difference under "Configuration" - "DVB-Inputs" - "TV-Adapter".
Please have a look at the 2 images:
- On "after_setup_only_1_working.png" the second "4-Port switch" entry is missing for some reason. Therefore I can only use one tuner and not both (using both tuners worked for weeks before).

I dont know what causes the problem and how to fix it without starting off from blank (I used to fix the problem by reinstalling and configuring tvheadend again a while ago).

Any Hints?


Replies (2)

RE: Tv Adapter change in Configuration Tab after some time - Added by saen acro over 6 years ago

Dmesg lsusb
Linux move tuners arrange sometimes.
problem in serial number and mac address missing or same

RE: Tv Adapter change in Configuration Tab after some time - Added by Heinz Bär over 6 years ago

its a pcie card so i will give u lspci aswell:

lspci:

00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e)
00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
01:00.0 Multimedia video controller: Spin Master Ltd. PCIe Video Bridge (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)

dmesg:

[    0.000000] Linux version 4.15.7-1-ARCH (builduser@heftig-14534) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Wed Feb 28 19:01:57 UTC 2018
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000009d576fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d577000-0x000000009d5a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009d5a7000-0x000000009d5fafff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d5fb000-0x000000009d70bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009d70c000-0x000000009da7afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009da7b000-0x000000009da7bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009da7c000-0x000000009dabdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009dabe000-0x000000009dc2bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009dc2c000-0x000000009dff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009dffa000-0x000000009dffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x855f8018-0x85608057] usable ==> usable
[    0.000000] e820: update [mem 0x855f8018-0x85608057] usable ==> usable
[    0.000000] e820: update [mem 0x855ea018-0x855f7057] usable ==> usable
[    0.000000] e820: update [mem 0x855ea018-0x855f7057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020100000-0x00000000855ea017] usable
[    0.000000] reserve setup_data: [mem 0x00000000855ea018-0x00000000855f7057] usable
[    0.000000] reserve setup_data: [mem 0x00000000855f7058-0x00000000855f8017] usable
[    0.000000] reserve setup_data: [mem 0x00000000855f8018-0x0000000085608057] usable
[    0.000000] reserve setup_data: [mem 0x0000000085608058-0x000000009d576fff] usable
[    0.000000] reserve setup_data: [mem 0x000000009d577000-0x000000009d5a6fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009d5a7000-0x000000009d5fafff] usable
[    0.000000] reserve setup_data: [mem 0x000000009d5fb000-0x000000009d70bfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009d70c000-0x000000009da7afff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009da7b000-0x000000009da7bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000009da7c000-0x000000009dabdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009dabe000-0x000000009dc2bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000009dc2c000-0x000000009dff9fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009dffa000-0x000000009dffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x9d681000  ACPI 2.0=0x9d681000  SMBIOS=0xf04d0  MPS=0xfd4c0 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900DC-ITX, BIOS P1.60 11/07/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09E800000 mask FFF800000 uncachable
[    0.000000]   3 base 09F000000 mask FFF000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3560M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 32M     num_reg: 5      lose cover RAM: 0G
[    0.000000] e820: update [mem 0x9e800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
[    0.000000] BRK [0x1b63a000, 0x1b63afff] PGTABLE
[    0.000000] BRK [0x1b63b000, 0x1b63bfff] PGTABLE
[    0.000000] BRK [0x1b63c000, 0x1b63cfff] PGTABLE
[    0.000000] BRK [0x1b63d000, 0x1b63dfff] PGTABLE
[    0.000000] BRK [0x1b63e000, 0x1b63efff] PGTABLE
[    0.000000] BRK [0x1b63f000, 0x1b63ffff] PGTABLE
[    0.000000] BRK [0x1b640000, 0x1b640fff] PGTABLE
[    0.000000] BRK [0x1b641000, 0x1b641fff] PGTABLE
[    0.000000] BRK [0x1b642000, 0x1b642fff] PGTABLE
[    0.000000] BRK [0x1b643000, 0x1b643fff] PGTABLE
[    0.000000] BRK [0x1b644000, 0x1b644fff] PGTABLE
[    0.000000] BRK [0x1b645000, 0x1b645fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f7a7000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009D681000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000009D681080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009D68C2E8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170831/tbfadt-603)
[    0.000000] ACPI: DSDT 0x000000009D681190 00B158 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000009D70BF80 000040
[    0.000000] ACPI: APIC 0x000000009D68C3F8 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000009D68C480 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000009D68C4C8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: LPIT 0x000000009D68C508 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
[    0.000000] ACPI: AAFT 0x000000009D68C610 000110 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000009D68C720 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x000000009D68C758 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000009D68CEC0 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000009D68D150 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x000000009D68D2D0 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fffd000-0x13fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x000000009d576fff]
[    0.000000]   node   0: [mem 0x000000009d5a7000-0x000000009d5fafff]
[    0.000000]   node   0: [mem 0x000000009da7b000-0x000000009da7bfff]
[    0.000000]   node   0: [mem 0x000000009dabe000-0x000000009dc2bfff]
[    0.000000]   node   0: [mem 0x000000009dffa000-0x000000009dffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 906718
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10009 pages used for memmap
[    0.000000]   DMA32 zone: 640576 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at 0x000000009f000000-0x00000000beffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl res lint[0x6e])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x8f])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low dfl lint[0xb2])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x88])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x855ea000-0x855eafff]
[    0.000000] PM: Registered nosave memory: [mem 0x855f7000-0x855f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x855f8000-0x855f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x85608000-0x85608fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d577000-0x9d5a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d5fb000-0x9d70bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d70c000-0x9da7afff]
[    0.000000] PM: Registered nosave memory: [mem 0x9da7c000-0x9dabdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9dc2c000-0x9dff9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xbeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 892525
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3107584K/3626872K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 519288K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31419 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000]     RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]     Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.000000]     Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.001000] APIC: Switch to symmetric I/O mode setup
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.006000] tsc: Detected 1999.200 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3998.40 BogoMIPS (lpj=1999200)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.007072] Security Framework initialized
[    0.007076] Yama: becoming mindful.
[    0.008965] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009834] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009908] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009936] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010370] CPU: Physical Processor ID: 0
[    0.010372] CPU: Processor Core ID: 0
[    0.010380] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010382] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010394] mce: CPU supports 6 MCE banks
[    0.010403] CPU0: Thermal monitoring enabled (TM1)
[    0.010408] process: using mwait in idle threads
[    0.010414] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.010416] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.010419] Spectre V2 : Mitigation: Full generic retpoline
[    0.010645] Freeing SMP alternatives memory: 24K
[    0.043073] TSC deadline timer enabled
[    0.043079] smpboot: CPU0: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.047029] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.047059] ... version:                3
[    0.047061] ... bit width:              40
[    0.047063] ... generic registers:      2
[    0.047066] ... value mask:             000000ffffffffff
[    0.047068] ... max period:             0000007fffffffff
[    0.047070] ... fixed-purpose events:   3
[    0.047072] ... event mask:             0000000700000003
[    0.049015] Hierarchical SRCU implementation.
[    0.056278] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.058013] smp: Bringing up secondary CPUs ...
[    0.067045] x86: Booting SMP configuration:
[    0.067050] .... node  #0, CPUs:      #1 #2 #3
[    0.088009] smp: Brought up 1 node, 4 CPUs
[    0.088014] smpboot: Max logical packages: 1
[    0.088018] smpboot: Total of 4 processors activated (15993.60 BogoMIPS)
[    0.089230] devtmpfs: initialized
[    0.089230] x86/mm: Memory block size: 128MB
[    0.090612] PM: Registering ACPI NVS region [mem 0x9d5fb000-0x9d70bfff] (1118208 bytes)
[    0.090612] reboot: ASRock Q1900DC-ITX series board detected. Selecting PCI-method for reboots.
[    0.090612] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.091029] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.091184] pinctrl core: initialized pinctrl subsystem
[    0.091373] RTC time:  8:14:46, date: 03/06/18
[    0.091603] NET: Registered protocol family 16
[    0.092021] cpuidle: using governor ladder
[    0.092030] cpuidle: using governor menu
[    0.092125] ACPI: bus type PCI registered
[    0.092130] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.092315] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.092321] PCI: not using MMCONFIG
[    0.092323] PCI: Using configuration type 1 for base access
[    0.095106] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.095212] ACPI: Added _OSI(Module Device)
[    0.095216] ACPI: Added _OSI(Processor Device)
[    0.095219] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.095221] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113886] ACPI: Dynamic OEM Table Load:
[    0.113900] ACPI: SSDT 0xFFFF9BC97AED3C00 0003D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.114641] ACPI: Dynamic OEM Table Load:
[    0.114652] ACPI: SSDT 0xFFFF9BC97AED2400 0003DE (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.116184] ACPI: Dynamic OEM Table Load:
[    0.116194] ACPI: SSDT 0xFFFF9BC97AEC4800 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.116842] ACPI: Dynamic OEM Table Load:
[    0.116852] ACPI: SSDT 0xFFFF9BC97AF26780 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.121549] ACPI: Interpreter enabled
[    0.121599] ACPI: (supports S0 S3 S4 S5)
[    0.121602] ACPI: Using IOAPIC for interrupt routing
[    0.121835] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.124035] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.124074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.125496] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.350343] ACPI: Power Resource [USBC] (on)
[    0.354298] ACPI: Power Resource [PLPE] (on)
[    0.355178] ACPI: Power Resource [PLPE] (on)
[    0.371959] ACPI: Power Resource [CLK0] (on)
[    0.372074] ACPI: Power Resource [CLK1] (on)
[    0.447251] ACPI: Power Resource [FN00] (off)
[    0.449010] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.449024] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.449573] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.450876] PCI host bridge to bus 0000:00
[    0.450882] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.450885] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.450889] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.450892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.450895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.450898] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.450901] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.450904] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0915ffe window]
[    0.450908] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.450921] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.451225] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.451241] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.451253] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.451264] pci 0000:00:02.0: reg 0x20: [io  0xf020-0xf027]
[    0.451287] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.451551] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.451574] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit]
[    0.451640] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.451889] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.451920] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    0.451934] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    0.452043] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.452299] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.452326] pci 0000:00:1b.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit]
[    0.452403] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.452645] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.452718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.452963] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.453037] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.453293] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    0.453364] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.453614] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    0.453685] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.453941] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.454260] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.454305] pci 0000:00:1f.3: reg 0x10: [mem 0xd0914000-0xd091401f]
[    0.454376] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.454930] pci 0000:01:00.0: [1ade:3038] type 00 class 0x040000
[    0.455056] pci 0000:01:00.0: reg 0x10: [mem 0xd0800000-0xd0800fff]
[    0.459078] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.459088] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.459248] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.459385] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.459418] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.459447] pci 0000:03:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
[    0.459466] pci 0000:03:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref]
[    0.459567] pci 0000:03:00.0: supports D1 D2
[    0.459570] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.463035] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.463043] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.463050] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.463228] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[    0.463255] pci 0000:04:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.463267] pci 0000:04:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.463279] pci 0000:04:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.463291] pci 0000:04:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.463303] pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.463315] pci 0000:04:00.0: reg 0x24: [mem 0xd0600000-0xd06001ff]
[    0.463512] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.463518] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.463522] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.568849] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.569101] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.569342] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.569583] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.569824] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.570069] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.570311] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.570553] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.573245] acpi 80860F09:00: Device [PWM1] is in always present list
[    0.575115] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.575115] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.575115] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.575115] vgaarb: loaded
[    0.575465] EDAC MC: Ver: 3.0.0
[    0.576045] Registered efivars operations
[    0.582049] PCI: Using ACPI for IRQ routing
[    0.587523] PCI: pci_cache_line_size set to 64 bytes
[    0.587602] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.587606] e820: reserve RAM buffer [mem 0x855ea018-0x87ffffff]
[    0.587609] e820: reserve RAM buffer [mem 0x855f8018-0x87ffffff]
[    0.587611] e820: reserve RAM buffer [mem 0x9d577000-0x9fffffff]
[    0.587614] e820: reserve RAM buffer [mem 0x9d5fb000-0x9fffffff]
[    0.587616] e820: reserve RAM buffer [mem 0x9da7c000-0x9fffffff]
[    0.587619] e820: reserve RAM buffer [mem 0x9dc2c000-0x9fffffff]
[    0.587621] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[    0.588005] NetLabel: Initializing
[    0.588005] NetLabel:  domain hash size = 128
[    0.588005] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.588005] NetLabel:  unlabeled traffic allowed by default
[    0.589005] clocksource: Switched to clocksource refined-jiffies
[    0.614001] VFS: Disk quotas dquot_6.6.0
[    0.614001] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.614001] pnp: PnP ACPI init
[    0.614001] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.614042] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.614047] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.614051] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.614062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.614380] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.614392] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.720674] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.720679] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.720689] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.720693] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.720697] system 00:03: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    0.720701] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.720704] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.720708] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.720711] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.720722] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.724380] pnp: PnP ACPI: found 4 devices
[    0.733564] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.733979] clocksource: Switched to clocksource acpi_pm
[    0.733979] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.733979] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.733979] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.733979] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.733979] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.733979] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.733979] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.733979] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[    0.733979] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[    0.733979] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.733979] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.733979] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[    0.733979] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[    0.733979] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.733979] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.733979] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.733979] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.733979] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.733979] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.733979] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.733979] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.733979] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.733979] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.733979] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.733979] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.733979] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.733979] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.733979] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.733979] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.733979] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.733979] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.733979] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.733979] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0915ffe window]
[    0.733979] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.733979] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[    0.733979] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.733979] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.733979] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.733979] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.733979] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.734616] NET: Registered protocol family 2
[    0.734903] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.735086] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.735241] TCP: Hash tables configured (established 32768 bind 32768)
[    0.735337] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.735375] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.735503] NET: Registered protocol family 1
[    0.735533] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.736001] PCI: CLS 64 bytes, default 64
[    0.736156] Unpacking initramfs...
[    0.929364] Freeing initrd memory: 8544K
[    0.929372] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.929378] software IO TLB [mem 0x815e9000-0x855e9000] (64MB) mapped at [0000000087baac44-00000000bba518b2]
[    0.929437] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a275294b2, max_idle_ns: 881590412759 ns
[    0.929500] clocksource: Switched to clocksource tsc
[    0.929725] Scanning for low memory corruption every 60 seconds
[    0.930860] Initialise system trusted keyrings
[    0.930883] Key type blacklist registered
[    0.930999] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.933508] zbud: loaded
[    0.937742] Key type asymmetric registered
[    0.937746] Asymmetric key parser 'x509' registered
[    0.937827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.937944] io scheduler noop registered
[    0.937947] io scheduler deadline registered
[    0.938104] io scheduler cfq registered (default)
[    0.938107] io scheduler mq-deadline registered
[    0.938109] io scheduler kyber registered
[    0.938166] io scheduler bfq registered
[    0.939528] efifb: probing for efifb
[    0.939553] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    0.939556] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.939558] efifb: scrolling: redraw
[    0.939561] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.944733] Console: switching to colour frame buffer device 128x48
[    0.949603] fb0: EFI VGA frame buffer device
[    0.949637] intel_idle: MWAIT substates: 0x33000020
[    0.949639] intel_idle: v0.4.1 model 0x37
[    0.950156] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.950288] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.950334] ACPI: Power Button [PWRB]
[    0.950414] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.950430] ACPI: Sleep Button [SLPB]
[    0.950523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.950559] ACPI: Power Button [PWRF]
[    0.956921] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.957225] thermal LNXTHERM:00: registered as thermal_zone0
[    0.957228] ACPI: Thermal Zone [TZ01] (27 C)
[    0.957737] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.959434] hpet: number irqs doesn't agree with number of timers
[    0.963902] intel_pstate: Intel P-state driver initializing
[    0.965783] ledtrig-cpu: registered to indicate activity on CPUs
[    0.966709] NET: Registered protocol family 10
[    0.983949] Segment Routing with IPv6
[    0.984026] NET: Registered protocol family 17
[    0.986971] RAS: Correctable Errors collector initialized.
[    0.987427] microcode: sig=0x30678, pf=0x4, revision=0x831
[    0.987852] microcode: Microcode Update Driver: v2.2.
[    0.987896] sched_clock: Marking stable (987832285, 0)->(988108775, -276490)
[    0.990897] registered taskstats version 1
[    0.990917] Loading compiled-in X.509 certificates
[    0.990969] zswap: loaded using pool lzo/zbud
[    1.001815] Key type big_key registered
[    1.002656]   Magic number: 10:445:219
[    1.002739] acpi device:3d: hash matches
[    1.002795] hctosys: unable to open rtc device (rtc0)
[    1.019441] Freeing unused kernel memory: 1432K
[    1.019445] Write protecting the kernel read-only data: 16384k
[    1.022283] Freeing unused kernel memory: 2016K
[    1.026992] Freeing unused kernel memory: 872K
[    1.249811] ACPI: bus type USB registered
[    1.249856] usbcore: registered new interface driver usbfs
[    1.249874] usbcore: registered new interface driver hub
[    1.249930] usbcore: registered new device driver usb
[    1.252658] SCSI subsystem initialized
[    1.258574] libata version 3.00 loaded.
[    1.258706] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.258721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.259962] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.259971] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.260237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.260240] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.260243] usb usb1: Product: xHCI Host Controller
[    1.260245] usb usb1: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
[    1.260247] usb usb1: SerialNumber: 0000:00:14.0
[    1.260591] ahci 0000:04:00.0: version 3.0
[    1.260849] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
[    1.260883] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.260887] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.261172] hub 1-0:1.0: USB hub found
[    1.261198] hub 1-0:1.0: 6 ports detected
[    1.263048] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.263057] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.263147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.263150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.263153] usb usb2: Product: xHCI Host Controller
[    1.263155] usb usb2: Manufacturer: Linux 4.15.7-1-ARCH xhci-hcd
[    1.263157] usb usb2: SerialNumber: 0000:00:14.0
[    1.263387] hub 2-0:1.0: USB hub found
[    1.263403] hub 2-0:1.0: 1 port detected
[    1.266043] scsi host0: ahci
[    1.269059] scsi host1: ahci
[    1.269167] ata1: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600100 irq 88
[    1.269171] ata2: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600180 irq 88
[    1.585563] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.716388] usb 1-1: New USB device found, idVendor=174c, idProduct=2074
[    1.716395] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    1.716399] usb 1-1: Product: ASM107x
[    1.716403] usb 1-1: Manufacturer: ASRock
[    1.717506] hub 1-1:1.0: USB hub found
[    1.717975] hub 1-1:1.0: 4 ports detected
[    1.743405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.744088] ata1.00: supports DRM functions and may not be fully accessible
[    1.744194] ata1.00: READ LOG DMA EXT failed, trying PIO
[    1.750548] ata1.00: disabling queued TRIM support
[    1.750555] ata1.00: ATA-9: Crucial_CT120M500SSD1, MU05, max UDMA/133
[    1.750559] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.764998] ata1.00: supports DRM functions and may not be fully accessible
[    1.771398] ata1.00: disabling queued TRIM support
[    1.785185] ata1.00: configured for UDMA/133
[    1.786125] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT120M50 MU05 PQ: 0 ANSI: 5
[    1.828567] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.843820] usb 2-1: New USB device found, idVendor=174c, idProduct=3074
[    1.843827] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    1.843831] usb 2-1: Product: ASM107x
[    1.843835] usb 2-1: Manufacturer: ASRock
[    1.846328] hub 2-1:1.0: USB hub found
[    1.846468] hub 2-1:1.0: 4 ports detected
[    1.956190] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    2.086795] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[    2.086802] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.086807] usb 1-2: Product: USB2.0 Hub
[    2.088672] hub 1-2:1.0: USB hub found
[    2.088994] hub 1-2:1.0: 3 ports detected
[    2.255391] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.259792] ata2.00: ATA-8: WDC WD20EARS-22MVWB0, 51.0AB51, max UDMA/133
[    2.259799] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.265031] ata2.00: configured for UDMA/133
[    2.265890] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARS-22M AB51 PQ: 0 ANSI: 5
[    2.276480] ata1.00: Enabling discard_zeroes_data
[    2.276725] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.276729] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.276747] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.276753] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.276758] sd 0:0:0:0: [sda] Write Protect is off
[    2.276762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.276788] sd 1:0:0:0: [sdb] Write Protect is off
[    2.276793] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.276812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.276853] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.277368] ata1.00: Enabling discard_zeroes_data
[    2.280884]  sda: sda1 sda2
[    2.281550] ata1.00: Enabling discard_zeroes_data
[    2.282039] sd 0:0:0:0: [sda] supports TCG Opal
[    2.282052] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.332756]  sdb: sdb1
[    2.334611] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.621272] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.810998] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.822498] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.836361] systemd[1]: Detected architecture x86-64.
[    2.847506] systemd[1]: Set hostname to <upbox>.
[    3.003870] systemd[1]: Created slice User and Session Slice.
[    3.004251] systemd[1]: Reached target Remote File Systems.
[    3.004521] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.005094] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.005736] systemd[1]: Created slice System Slice.
[    3.006145] systemd[1]: Listening on Journal Socket.
[    3.006404] systemd[1]: Listening on udev Kernel Socket.
[    3.058695] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[    3.190376] systemd-journald[212]: Received request to flush runtime journal from PID 1
[    3.285403] Adding 4194300k swap on /swapfile.  Priority:-2 extents:6 across:4481020k SSFS
[    3.302614] pwm-lpss 80860F09:00: invalid resource
[    3.302682] pwm-lpss: probe of 80860F09:00 failed with error -22
[    3.327571] hidraw: raw HID events driver (C) Jiri Kosina
[    3.345990] rtc_cmos 00:00: RTC can wake from S4
[    3.346779] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.346815] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    3.368370] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.398364] Linux agpgart interface v0.103
[    3.437218] Bluetooth: Core ver 2.22
[    3.437252] NET: Registered protocol family 31
[    3.437254] Bluetooth: HCI device and connection manager initialized
[    3.437261] Bluetooth: HCI socket layer initialized
[    3.437265] Bluetooth: L2CAP socket layer initialized
[    3.437276] Bluetooth: SCO socket layer initialized
[    3.469353] Bluetooth: HCI UART driver ver 2.3
[    3.469359] Bluetooth: HCI UART protocol H4 registered
[    3.469361] Bluetooth: HCI UART protocol BCSP registered
[    3.469392] Bluetooth: HCI UART protocol LL registered
[    3.469393] Bluetooth: HCI UART protocol ATH3K registered
[    3.469395] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.469449] Bluetooth: HCI UART protocol Intel registered
[    3.469489] Bluetooth: HCI UART protocol Broadcom registered
[    3.469491] Bluetooth: HCI UART protocol QCA registered
[    3.469493] Bluetooth: HCI UART protocol AG6XX registered
[    3.469494] Bluetooth: HCI UART protocol Marvell registered
[    3.484986] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.485457] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    3.485462] mei_txe 0000:00:1a.0: PCI INT A: not connected
[    3.544872] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.544887] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.554154] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x00000000166e1009, d0:50:99:36:9a:4a, XID 0c000800 IRQ 90
[    3.554160] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.560080] iTCO_vendor_support: vendor-support=0
[    3.561564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.561665] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    3.562315] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.568883] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    3.579347] SMI PCIe driver 0000:01:00.0: enabling device (0000 -> 0002)
[    3.579508] SMI PCIe driver 0000:01:00.0: card detected: TechnoTrend TT-budget S2-4200 Twin
[    3.620692] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.621987] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.622718] intel_soc_dts_thermal: request_threaded_irq ret -22
[    3.627537] intel-spi intel-spi: w25q64dw (8192 Kbytes)
[    3.633298] intel_rapl: Found RAPL domain package
[    3.633302] intel_rapl: Found RAPL domain core
[    3.651542] Creating 1 MTD partitions on "intel-spi":
[    3.651548] 0x000000000000-0x000000800000 : "BIOS" 
[    3.667600] r8169 0000:03:00.0 enp3s0: link down
[    3.667610] r8169 0000:03:00.0 enp3s0: link down
[    3.667709] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.676288] dvbdev: DVB: registering new adapter (SMI_DVB)
[    3.717904] i2c i2c-1: Added multiplexed i2c bus 3
[    3.812549] [drm] Memory usable by graphics device = 2048M
[    3.812555] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    3.812557] fb: switching to inteldrmfb from EFI VGA
[    3.812593] Console: switching to colour dummy device 80x25
[    3.812915] [drm] Replacing VGA console driver
[    3.813076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.813078] [drm] Driver supports precise vblank timestamp query.
[    3.813804] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.829110] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    3.832056] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.833761] acpi device:09: registered as cooling_device6
[    3.833888] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    3.834305] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.854134] m88rs6000t 3-0021: chip_id=64
[    3.901610] [drm] Cannot find any crtc or sizes
[    3.974183] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.974188] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.974191] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.974193] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.974195] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.974197] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.974200] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.974202] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.020518] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[    4.046352] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    4.046466] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    4.046573] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    4.046673] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    4.047685] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.047815] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.047946] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.048104] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.072242] m88rs6000t 3-0021: Montage M88RS6000 internal tuner successfully identified
[    4.072307] SMI PCIe driver 0000:01:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)...
[    4.100955] SMI PCIe driver 0000:01:00.0: TechnoTrend TT-budget S2-4200 Twin port 0 MAC: bc:ea:2b:42:01:ab
[    4.101745] dvbdev: DVB: registering new adapter (SMI_DVB)
[    4.125124] i2c i2c-2: Added multiplexed i2c bus 12
[    4.254474] m88rs6000t 12-0021: chip_id=64
[    4.268816] random: crng init done
[    4.533396] m88rs6000t 12-0021: Montage M88RS6000 internal tuner successfully identified
[    4.538059] SMI PCIe driver 0000:01:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88RS6000)...
[    4.555754] SMI PCIe driver 0000:01:00.0: TechnoTrend TT-budget S2-4200 Twin port 1 MAC: bc:ea:2b:42:01:ac
[    4.581052] Registered IR keymap rc-tt-1500
[    4.581316] rc rc0: IR (TechnoTrend TT-budget S2-4200 Twin) as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/rc/rc0
[    4.581527] input: IR (TechnoTrend TT-budget S2-4200 Twin) as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/rc/rc0/input12
[    4.911417] m88ds3103 2-0069: found a 'Montage Technology M88DS3103' in cold state
[    4.912257] m88ds3103 2-0069: downloading firmware from file 'dvb-demod-m88rs6000.fw'
[    6.326670] r8169 0000:03:00.0 enp3s0: link up
[    6.326684] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    6.568072] fuse init (API version 7.26)
[   11.582236] m88ds3103 2-0069: found a 'Montage Technology M88DS3103' in warm state
[   11.582242] m88ds3103 2-0069: firmware version: 4.1
[   11.655631] SMI PCIe driver 0000:01:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)
[   11.732093] m88ds3103 1-0069: found a 'Montage Technology M88DS3103' in cold state
[   11.732171] m88ds3103 1-0069: downloading firmware from file 'dvb-demod-m88rs6000.fw'
[   18.120515] m88ds3103 1-0069: found a 'Montage Technology M88DS3103' in warm state
[   18.120520] m88ds3103 1-0069: firmware version: 4.1
[   18.195780] SMI PCIe driver 0000:01:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)

lsusb:

Bus 002 Device 002: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    (1-2/2)