TvHeadend 4.2/4.3 with SAT>IP and diseqc
Added by M R over 7 years ago
Hi there,
I have the following setup with TvHeadend 4.3-295~ga9dffb7 or 4.2.3-19~g490b6f2:
SAT2IP Server: Digibox R1
Tuner 1: Single Cable to 2/1 Diseqc Switch (1.1 or 1.0). Diseqc position 1 goes to Quad LNB Astra 19,2 and Disqec position 2 goes to Twin LNB Hotbird 13,0
Tuner 2: Single cable to Quad LNB with Astra 19,2
Tuner 3: not used
Tuner 4: not used
Server: TvHeadend 4.3-295~ga9dffb7
Client: Kodi with TvHeadend Addon
I have configured under DVB-Inputs-> TV-Adapters-> Tuner 1 2 Satellite Positions and assigned Position 1 to Network Astra and the second to Hotbird.
But only Hotbird is working. TvHeadend is unable to switch to Astra on Tuner 1
Am I missing some special diseqc option?
I tried under DVB-Inputs->Networks to set the SAT>IP source number to 1 and 2, but it didnt work.
Could you please give an hint how to configure this right? Thanks
network.PNG (34.3 KB) network.PNG | Network Tab | ||
tuner 1_pos1.PNG (37.2 KB) tuner 1_pos1.PNG | Tuner 1 Astra | ||
tuner_1.PNG (70.6 KB) tuner_1.PNG | Tuner 1 | ||
tuner1_pos2.PNG (45.3 KB) tuner1_pos2.PNG | Tuner 2 Hotbird |
Replies (1)
RE: TvHeadend 4.2/4.3 with SAT>IP and diseqc - Added by M R over 7 years ago
Ok got it by myself.
Seems like my Diseqc Switch is using weird input numbers for a 2 to 1 Switch.
It has Position 2 and 3 (not 1 and 2).
Therefore I need to configure for Tuner 1 4 Position and disable 1 and 4.