Tuner with dvb-s and dvb-c/t input
Added by Kay R. about 8 years ago
I have a HVR-5500. It has both dvb-s/2 input and dvb-c/t input. The DVB-S/2 is listed as TDA10071 under adapter1. The DVB-C and DVB-T are listed as SI2165 under adapter2.
Now it seems I can only use one of them at a time, because if dvb-c is in use and dvb-s kicks inn, it locks up.
Is there a way to tell tvheadend to only use one of adapter1 and adapter2 at a time ?
Replies (1)
RE: Tuner with dvb-s and dvb-c/t input - Added by Jonathan Thomson about 8 years ago
No - the reason being the card is representing the DVB-S tuner as one input and the DVB-C/T input as another, both independent of each other. TVHeadend allows you to restrict the number of streams per input (so you can limit the number of streams on the DVB-S or DVB-C/T input, but not link them together so if one is active, the other can't be etc.)
This sounds like a driver issue because presenting two inputs logically suggests two available tuners, if both cannot work simultaneously then something is wrong at the hardware/driver level.