ISDB-T en chile :D
ISDB-T en chile :D
Hello,
My configuration :
- Mygica S870 ISDB-T USB
- Debian 8 Jessie
- version tvheadend : 4.1-2140~gf34fac1
My USB Tv tuner work without problem :
[34435.318380] usb 2-1: new high-speed USB device number 2 using ehci-pci [34435.467329] usb 2-1: New USB device found, idVendor=10b8, idProduct=1fa0 [34435.467337] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34435.467341] usb 2-1: Product: STK8096GP [34435.467344] usb 2-1: Manufacturer: DiBcom [34435.467347] usb 2-1: SerialNumber: 1 [34435.467951] dvb-usb: found a 'DiBcom STK8096GP reference design' in cold state, will try to load a firmware [34435.470084] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [34435.673046] dib0700: firmware started successfully. [34436.178635] dvb-usb: found a 'DiBcom STK8096GP reference design' in warm state. [34436.178881] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [34436.178990] DVB: registering new adapter (DiBcom STK8096GP reference design) [34436.431488] usb 2-1: DVB: registering adapter 0 frontend 0 (DiBcom 8000 ISDB-T)... [34436.652814] DiB0090: successfully identified [34436.652833] Registered IR keymap rc-dib0700-rc5 [34436.653044] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0/input4 [34436.653172] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0 [34436.654055] dvb-usb: schedule remote query interval to 50 msecs. [34436.654061] dvb-usb: DiBcom STK8096GP reference design successfully initialized and connected.
with a modificaded version of brasil frecuency (frec.conf) i can scan the channels of chile :
T 533143857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # CANAL 13 T 551143857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # MEGA T 563143857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # UCV T 587143857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # TVN T 641143857 6MHz 3/4 AUTO AUTO AUTO AUTO NONE # SenalUC
command :
scan -o vdr -v frec.conf > chan.conf
result of scan :
scanning frec_p.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 533143857 2 3 9 6 2 4 0 initial transponder 551143857 2 3 9 6 2 4 0 initial transponder 563143857 2 3 9 6 2 4 0 initial transponder 587143857 2 3 9 6 2 4 0 initial transponder 641143857 2 3 9 6 2 4 0 >>> tune to: 533143:I999B6C34D999M999T999G999Y0:T:27500: >>> tuning status == 0x1d NIT (actual TS) Network Name 'CANAL 13' SDT (actual TS) 0x0000 0x8db8: pmt_pid 0x0000 CANAL 13 MOVIL -- CANAL 13 MOVIL (running) 0x0000 0x8c20: pmt_pid 0x0000 CANAL 13 HD -- CANAL 13 HD (running) WARNING: filter timeout pid 0x0000 >>> tune to: 551143:I999B6C34D999M999T999G999Y0:T:27500: >>> tuning status == 0x1d SDT (actual TS) 0x0000 0x0020: pmt_pid 0x0000 (null) -- MEGA HD (???) 0x0000 0x0038: pmt_pid 0x0000 (null) -- MEGA MOVIL (???) NIT (actual TS) Network Name 'MEGA MOVIL' WARNING: filter timeout pid 0x0000 >>> tune to: 563143:I999B6C34D999M999T999G999Y0:T:27500: >>> tuning status == 0x1d SDT (actual TS) 0x0000 0x7d00: pmt_pid 0x0000 UCV HD -- UCV HD (???) 0x0000 0x7d01: pmt_pid 0x0000 UCV 3 -- UCV 3 (???) 0x0000 0x7d18: pmt_pid 0x0000 UCV Movil -- UCV Movil (???) WARNING: filter timeout pid 0x0000 NIT (actual TS) Network Name 'UCV Television' >>> tune to: 587143:I999B6C34D999M999T999G999Y0:T:27500: >>> tuning status == 0x1d NIT (actual TS) Network Name 'TVN' SDT (actual TS) 0x0000 0x00e0: pmt_pid 0x0000 (null) -- TVN HD1 (???) 0x0000 0x00f8: pmt_pid 0x0000 (null) -- TVN Movil (???) 0x0000 0x00e1: pmt_pid 0x0000 (null) -- TVN SD (???) WARNING: filter timeout pid 0x0000 >>> tune to: 641143:I999B6C34D999M999T999G999Y0:T:27500: >>> tuning status == 0x1f NIT (actual TS) Network Name 'Senal_UC' SDT (actual TS) 0x0000 0x1ba0: pmt_pid 0x0000 (null) -- SenalUC HD (???) 0x0000 0x1bb8: pmt_pid 0x0000 (null) -- SenalUC Movil (???) PAT PMT 0x1fc8 for service 0x1bb8 WARNING: filter timeout pid 0x0101 dumping lists (12 services) Done.
I have some problem with the last build of Tvheadend, i have started with a Argentina set of muxes but without success (here an extract of scan result) same error all the time "scan no data, failed" :
2016-07-02 04:23:21.301 [ INFO] mpegts: 557.142MHz in ISDB-T Network - scan no data, failed 2016-07-02 04:23:21.301 [ INFO] subscription: 0051: "scan" unsubscribing 2016-07-02 04:23:21.301 [ INFO] mpegts: 551.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:23:21.302 [ INFO] opentv-skyuk: registering mux 551.142MHz in ISDB-T Network 2016-07-02 04:23:21.334 [ INFO] subscription: 0053: "scan" subscribing to mux "551.142MHz", weight: 5, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription" 2016-07-02 04:23:26.301 [ INFO] mpegts: 551.142MHz in ISDB-T Network - scan no data, failed 2016-07-02 04:23:26.301 [ INFO] subscription: 0053: "scan" unsubscribing 2016-07-02 04:23:26.304 [ INFO] mpegts: 545.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:23:26.304 [ INFO] opentv-skyuk: registering mux 545.142MHz in ISDB-T Network 2016-07-02 04:23:26.339 [ INFO] subscription: 0055: "scan" subscribing to mux "545.142MHz", weight: 5, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription" 2016-07-02 04:23:32.331 [ INFO] mpegts: 545.142MHz in ISDB-T Network - scan no data, failed 2016-07-02 04:23:32.331 [ INFO] subscription: 0055: "scan" unsubscribing 2016-07-02 04:23:32.333 [ INFO] mpegts: 539.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:23:32.333 [ INFO] opentv-skyuk: registering mux 539.142MHz in ISDB-T Network 2016-07-02 04:23:32.365 [ INFO] subscription: 0057: "scan" subscribing to mux "539.142MHz", weight: 5, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription" 2016-07-02 04:23:38.361 [ INFO] mpegts: 539.142MHz in ISDB-T Network - scan no data, failed 2016-07-02 04:23:38.361 [ INFO] subscription: 0057: "scan" unsubscribing 2016-07-02 04:23:38.362 [ INFO] mpegts: 533.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:23:38.363 [ INFO] opentv-skyuk: registering mux 533.142MHz in ISDB-T Network 2016-07-02 04:23:38.396 [ INFO] subscription: 0059: "scan" subscribing to mux "533.142MHz", weight: 5, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription" 2016-07-02 04:23:43.361 [ INFO] mpegts: 533.142MHz in ISDB-T Network - scan no data, failed 2016-07-02 04:23:43.361 [ INFO] subscription: 0059: "scan" unsubscribing 2016-07-02 04:23:43.363 [ INFO] mpegts: 527.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:23:43.364 [ INFO] opentv-skyuk: registering mux 527.142MHz in ISDB-T Network 2016-07-02 04:23:43.398 [ INFO] subscription: 005B: "scan" subscribing to mux "527.142MHz", weight: 5, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription"
log from start of tvheadend :
2016-07-02 04:55:49.593 [ INFO] main: Log started 2016-07-02 04:55:49.595 [ INFO] http: Starting HTTP server 0.0.0.0:9981 2016-07-02 04:55:49.596 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982 2016-07-02 04:55:49.596 [ ERROR] satips: use --satip_bindaddr parameter to select the local IP for SAT>IP 2016-07-02 04:55:49.596 [ ERROR] satips: using Google lookup (might block the task until timeout) 2016-07-02 04:55:49.631 [ INFO] config: loaded 2016-07-02 04:55:49.632 [ INFO] config: scanfile (re)initialization with path <none> 2016-07-02 04:55:49.692 [ INFO] linuxdvb: adapter added /dev/dvb/adapter0 2016-07-02 04:55:49.695 [ INFO] dvr: Creating new configuration '' 2016-07-02 04:55:49.698 [ INFO] CSA: Using 32bit parallel descrambling 2016-07-02 04:55:49.698 [ INFO] descrambler: adding CAID 0963 as quick ECM (Sky UK) 2016-07-02 04:55:49.698 [ INFO] descrambler: adding CAID 098C as quick ECM (Sky DE) 2016-07-02 04:55:49.698 [ INFO] descrambler: adding CAID 09C4 as quick ECM (Sky DE) 2016-07-02 04:55:49.698 [ INFO] descrambler: adding CAID 09CD as quick ECM (Sky IT) 2016-07-02 04:55:49.698 [ INFO] descrambler: adding CAID 2600 as constant crypto-word (BISS) 2016-07-02 04:55:49.699 [ INFO] epggrab: module eit created 2016-07-02 04:55:49.699 [ INFO] epggrab: module uk_freesat created 2016-07-02 04:55:49.699 [ INFO] epggrab: module uk_freeview created 2016-07-02 04:55:49.699 [ INFO] epggrab: module viasat_baltic created 2016-07-02 04:55:49.699 [ INFO] epggrab: module Bulsatcom_39E created 2016-07-02 04:55:49.699 [ INFO] epggrab: module psip created 2016-07-02 04:55:49.723 [ INFO] epggrab: module opentv-skyit created 2016-07-02 04:55:49.729 [ INFO] epggrab: module opentv-skynz created 2016-07-02 04:55:49.729 [ INFO] epggrab: module opentv-ausat created 2016-07-02 04:55:49.729 [ INFO] epggrab: module opentv-skyuk created 2016-07-02 04:55:49.735 [ INFO] epggrab: module pyepg created 2016-07-02 04:55:49.735 [ INFO] epggrab: module xmltv created 2016-07-02 04:55:49.755 [ INFO] epgdb: gzip format detected, inflating (ratio 72.3%) 2016-07-02 04:55:49.756 [ INFO] epgdb: loaded v2 2016-07-02 04:55:49.756 [ INFO] epgdb: config 1 2016-07-02 04:55:49.756 [ INFO] epgdb: channels 0 2016-07-02 04:55:49.756 [ INFO] epgdb: brands 0 2016-07-02 04:55:49.756 [ INFO] epgdb: seasons 0 2016-07-02 04:55:49.756 [ INFO] epgdb: episodes 0 2016-07-02 04:55:49.756 [ INFO] epgdb: broadcasts 0 2016-07-02 04:55:49.756 [ NOTICE] START: HTS Tvheadend version 4.1-2140~gf34fac1 started, running as PID:8253 UID:1000 GID:1000, CWD:/home/pi/tvheadend CNF:/home/pi/.hts/tvheadend 2016-07-02 04:55:50.654 [ INFO] AVAHI: Service 'Tvheadend' successfully established. 2016-07-02 04:55:50.732 [ INFO] mpegts: 689.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0 2016-07-02 04:55:51.198 [ INFO] subscription: 0001: "epggrab" subscribing to mux "689.142MHz", weight: 4, adapter: "DiBcom 8000 ISDB-T : ISDB-T #0", network: "ISDB-T Network", service: "Raw PID Subscription" 2016-07-02 04:55:51.649 [ INFO] scanfile: DVB-S - loaded 1 regions with 93 networks 2016-07-02 04:55:51.649 [ INFO] scanfile: DVB-T - loaded 43 regions with 729 networks 2016-07-02 04:55:51.649 [ INFO] scanfile: DVB-C - loaded 16 regions with 51 networks 2016-07-02 04:55:51.649 [ INFO] scanfile: ATSC-T - loaded 2 regions with 9 networks 2016-07-02 04:55:51.649 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks 2016-07-02 04:55:51.649 [ INFO] scanfile: ISDB-T - loaded 2 regions with 925 networks 2016-07-02 04:55:52.626 [WARNING] linuxdvb: Unhandled SNR scale: 0 2016-07-02 04:55:52.629 [WARNING] linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0 2016-07-02 04:56:26.971 [ INFO] subscription: 0001: "epggrab" unsubscribing 2016-07-02 04:56:27.971 [ INFO] mpegts: 473.142MHz in ISDB-T Network - tuning on DiBcom 8000 ISDB-T : ISDB-T #0
like you see, there are two warning :
2016-07-02 04:55:52.626 [WARNING] linuxdvb: Unhandled SNR scale: 0 2016-07-02 04:55:52.629 [WARNING] linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0
but i don't know if are important or not.
I'm ready for try all yours ideas !! i'm working for 2 days on this problem 