Synology 292e force DVB-C
Added by Kristoffer M over 8 years ago
Hello,
i am currently struggeling with TVHeadend and the DVB-C Mode of my tripple Tuner 292e.
When using DVBLink, the stick is found as a dvb-t,dvb-t2 and dvb-c tuner. But when i am starting tvheadend, it is only shown as a DVB-t tuner. (see screenshot)
I had it running before, but had to update my system to DSM 6 RC. Afterwards TVHeadend was no longer able to detect the DVB-C part of the tuner.
Is there any known workaround or does anybody has the same problem ? I have already downloaded the driver manually and tried to put it the firmware folder with no results.
Result from dmesg | grep dvb
[ 169.191624] em28178 #0: dvb set to isoc mode.
[ 170.607573] em28xx_dvb_init() EM28178_BOARD_PCTV_291E/292E
[ 170.613153] em28178 #0: em28xx_dvb_init(): attached si2168b
[ 170.639441] em28178 #0: Successfully loaded em28xx-dvb
[ 170.644653] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 177.973004] usbcore: registered new interface driver dvb_usb_ttusb2
[ 192.654794] usbcore: registered new interface driver dvb_usb_dib0700
[ 208.878472] usbcore: registered new interface driver tbsdvbc
[ 215.071031] usbcore: registered new interface driver dvb_usb_it913x
[ 217.198018] usbcore: registered new interface driver dvb_usb_dvbsky
tvheadend log
2016-03-11 21:14:05.054 [ ERROR]:tcp: bind: *:9981: Address already in use
2016-03-11 21:14:05.054 [ ERROR]:tcp: bind: *:9982: Address already in use
2016-03-11 21:14:05.153 [ INFO]:config: loaded
2016-03-11 21:14:07.468 [ DEBUG]:dvr: checking free and used disk space for config "Default profile" : OK
2016-03-11 21:14:12.153 [ INFO]:scanfile: DVB-T - loaded 44 regions with 1104 networks
2016-03-11 21:14:12.157 [ INFO]:scanfile: DVB-S - loaded 1 regions with 94 networks
2016-03-11 21:14:12.158 [ INFO]:scanfile: DVB-C - loaded 17 regions with 53 networks
2016-03-11 21:14:12.159 [ INFO]:scanfile: ATSC-T - loaded 2 regions with 9 networks
2016-03-11 21:14:12.160 [ INFO]:scanfile: ATSC-C - loaded 1 regions with 5 networks
2016-03-11 21:14:12.161 [ INFO]:scanfile: ISDB-T - loaded 2 regions with 1000 networks
2016-03-11 21:14:12.163 [ DEBUG]:fsmonitor: watch /dev
2016-03-11 21:14:12.166 [ DEBUG]:fsmonitor: watch /dev/dvb
2016-03-11 21:14:12.584 [ INFO]:linuxdvb: adapter added /dev/dvb/adapter8
2016-03-11 21:14:13.007 [ INFO]:linuxdvb: adapter added /dev/dvb/adapter0
2016-03-11 21:14:13.029 [ INFO]:dvr: Creating new configuration ''
2016-03-11 21:14:13.050 [ INFO]:descrambler: adding CAID 0963 as quick ECM (Sky UK)
2016-03-11 21:14:13.051 [ INFO]:descrambler: adding CAID 098C as quick ECM (Sky DE)
2016-03-11 21:14:13.052 [ INFO]:descrambler: adding CAID 09C4 as quick ECM (Sky DE)
2016-03-11 21:14:13.053 [ INFO]:descrambler: adding CAID 09CD as quick ECM (Sky IT)
2016-03-11 21:14:13.054 [ INFO]:descrambler: adding CAID 2600 as constant crypto-word (BISS)
2016-03-11 21:14:13.055 [ INFO]:epggrab: module eit created
2016-03-11 21:14:13.055 [ INFO]:epggrab: module uk_freesat created
2016-03-11 21:14:13.055 [ INFO]:epggrab: module uk_freeview created
2016-03-11 21:14:13.055 [ INFO]:epggrab: module viasat_baltic created
2016-03-11 21:14:13.055 [ INFO]:epggrab: module Bulsatcom_39E created
2016-03-11 21:14:13.055 [ INFO]:epggrab: module psip created
2016-03-11 21:14:13.102 [ DEBUG]:opentv: dictionary skynz loaded
2016-03-11 21:14:13.107 [ DEBUG]:opentv: dictionary skyit loaded
2016-03-11 21:14:13.110 [ DEBUG]:opentv: dictionary skyeng loaded
2016-03-11 21:14:13.114 [ DEBUG]:opentv: dictonaries loaded
2016-03-11 21:14:13.124 [ DEBUG]:opentv: genre map ausat loaded
2016-03-11 21:14:13.131 [ DEBUG]:opentv: genre map skynz loaded
2016-03-11 21:14:13.132 [ DEBUG]:opentv: genre map skyit loaded
2016-03-11 21:14:13.132 [ DEBUG]:opentv: genre map skyuk loaded
2016-03-11 21:14:13.133 [ DEBUG]:opentv: genre maps loaded
2016-03-11 21:14:13.148 [ INFO]:epggrab: module opentv-ausat created
2016-03-11 21:14:13.149 [ DEBUG]:opentv: provider ausat loaded
2016-03-11 21:14:13.149 [ INFO]:epggrab: module opentv-skynz created
2016-03-11 21:14:13.149 [ DEBUG]:opentv: provider skynz loaded
2016-03-11 21:14:13.149 [ INFO]:epggrab: module opentv-skyit created
2016-03-11 21:14:13.158 [ DEBUG]:opentv: provider skyit loaded
2016-03-11 21:14:13.161 [ INFO]:epggrab: module opentv-skyuk created
2016-03-11 21:14:13.163 [ DEBUG]:opentv: provider skyuk loaded
2016-03-11 21:14:13.163 [ DEBUG]:opentv: providers loaded
2016-03-11 21:14:13.188 [ INFO]:epggrab: module pyepg created
2016-03-11 21:14:13.188 [ INFO]:epggrab: module xmltv created
2016-03-11 21:14:13.189 [ DEBUG]:epggrab: using internal grab search
2016-03-11 21:14:13.203 [ INFO]:epgdb: gzip format detected, inflating (ratio 72.3%)
2016-03-11 21:14:13.203 [ INFO]:epgdb: loaded v2
2016-03-11 21:14:13.203 [ INFO]:epgdb: config 1
2016-03-11 21:14:13.203 [ INFO]:epgdb: channels 0
2016-03-11 21:14:13.203 [ INFO]:epgdb: brands 0
2016-03-11 21:14:13.203 [ INFO]:epgdb: seasons 0
2016-03-11 21:14:13.203 [ INFO]:epgdb: episodes 0
2016-03-11 21:14:13.203 [ INFO]:epgdb: broadcasts 0
2016-03-11 21:14:13.207 [ NOTICE]:START: HTS Tvheadend version 4.1.1595 started, running as PID:20605 UID:100 GID:100, CWD:/ CNF:/volume1/@appstore/tvheadend-testing/var
System:
Synology NAS 213j , DSM 6 RC
292e Tripple Sticke USB Tuner
TVHeadend 4.1.1595 (mutiple versions tested with same result) -> worked before updating to DSM 6 RC
Thank you and kind regards !
Unbenannt.PNG (16.5 KB) Unbenannt.PNG |
Replies (1)
RE: Synology 292e force DVB-C - Added by Kristoffer M over 8 years ago
Hello,
i have solved this problem. You have to fully setup the 292e as a DVB-C stick in DVBLink (scan for channels, check if they are working etc.) .
Leave it fully configured and running and then head over to tvheadend. The usb stick then magically appears as a DVB-T and also as a DVB-C stick.
Hope that this will help someone out there !