RSTP SETUP error -5 (SAT>IP)

Added by Michael Bihler almost 9 years ago

I have a GSS DSI 400 Sat>IP server.

tvheadend is running on a Synology NAS (DS216se).
Version of tvheadend is 4.1.988-1

tvheadend automatically found 4 SAT>IP tuners.

I Configured one network of type DVB-S (19.2E : Astra 1KR/1L/1M/1N) and assigned it to each tuner position.

When I select "force scan" for the network tvheadend tries to subscribe to one mux and then stops:

2015-11-23 10:46:18.027 mpegts: 12551.5V in DVB-S - open PID 1FFB (8187) [20/0x7032a0]
2015-11-23 10:46:18.027 psip: installed table handlers
2015-11-23 10:46:18.027 psip: grab started
2015-11-23 10:46:18.027 mpegts: 12551.5V in DVB-S - open PID tables subscription [0042/0x6f1430]
2015-11-23 10:46:18.027 subscription: 000C: "scan" subscribing to mux "12551.5V", weight: 6, adapter: "SAT>IP DVB-S Tuner #1 (192.168.0.80)", network: "DVB-S", service: "Raw PID Subscription"
2015-11-23 10:46:18.035 satip: SAT>IP DVB-S Tuner #1 (192.168.0.80) - RTSP SETUP error -5 (Input/output error) [6-404]
2015-11-23 10:46:18.035 service: 12551.5V in DVB-S: Status changed to [Tuning failed]

Does anyone have an idea why the RTSP setup could fail?

Regards
Michael Bihler

Replies (2)

RE: RSTP SETUP error -5 (SAT>IP) - Added by Michael Bihler almost 9 years ago

It looks like the SAT>IP server was hanging.

I turned it off and on and now all muxes have been found.

But when I start mapping the services, after 86 found services, this error returns:

2015-11-23 13:56:29.010 satip: SAT>IP DVB-S Tuner #3 (192.168.0.80) - RTSP SETUP error -5 (Input/output error) [6-404]
2015-11-23 13:56:31.000 subscription: 0553: service instance is bad, reason: Tuning failed
2015-11-23 13:56:31.000 mpegts: 11479V in SAT-IP - tuning on SAT>IP DVB-S Tuner #4 (192.168.0.80)
2015-11-23 13:56:31.005 subscription: 0553: "service_mapper" subscribing to service "SAT-IP/11479V/NRJ HITS", weight: 7, adapter: "SAT>IP DVB-S Tuner #4 (192.168.0.80)", network: "SAT-IP", mux: "11479V", provider: "CSAT", client="service_mapper"

I think the SAT>IP box is hanging again.

Any ideas?

RE: RSTP SETUP error -5 (SAT>IP) - Added by Thomas Smith over 8 years ago

iam using satip-firmware from https://github.com/perexg/satip-axe because of buggy originalfirmware

maybe this helps

(1-2/2)

Project

General

Profile

Tvheadend