Project

General

Profile

Forums » General »

It will not scan

Added by Raivo Kask over 9 years ago

I maid an installation from scratch of Ubuntu server (Vivid Vervet 15.04 64-bits) & Tvheadend (3.9.2505) & oscam-svn (1.20) and now I have problem to start the scan with my backend TVheadend.
My tuner is quad TBS 6908 which seems to be recognized by Ubuntu ... pls check below.
In Network I choose Force scan but nothing happens ... scan is pending.
But when I run 'w_scan' command in a terminal window it starts to scan immediately ...
Attach some images to show how my config looks like.
Where have I gone wrong ?

cat /var/log/syslog | grep -i tbs
Feb 18 12:24:35 tv-server kernel: [ 7.276952] TBS PCIE Detected TBS6908 Board Rev 3
Feb 18 12:24:35 tv-server kernel: [ 7.277325] DVB: registering new adapter (TBS PCIE DVB Adapter)
Feb 18 12:24:35 tv-server kernel: [ 7.547911] tbs6908fe: module license 'TurboSight Proprietary: www.tbsdtv.com' taints kernel.
Feb 18 12:24:35 tv-server kernel: [ 7.548126] TurboSight TBS 6908 Frontend Attaching...
Feb 18 12:24:36 tv-server kernel: [ 8.575290] TurboSight TBS6908 DVB-S2 card adapter0 MAC=00:22:ab:69:08:01
Feb 18 12:24:36 tv-server kernel: [ 8.575291] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
Feb 18 12:24:36 tv-server kernel: [ 8.575335] DVB: registering new adapter (TBS PCIE DVB Adapter)
Feb 18 12:24:36 tv-server kernel: [ 8.575427] TurboSight TBS 6908 Frontend Attaching...
Feb 18 12:24:36 tv-server kernel: [ 8.578029] TurboSight TBS6908 DVB-S2 card adapter1 MAC=00:22:ab:69:08:02
Feb 18 12:24:36 tv-server kernel: [ 8.578031] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
Feb 18 12:24:36 tv-server kernel: [ 8.578064] DVB: registering new adapter (TBS PCIE DVB Adapter)
Feb 18 12:24:36 tv-server kernel: [ 8.735994] TurboSight TBS 6908 Frontend Attaching...
Feb 18 12:24:37 tv-server kernel: [ 9.732761] TurboSight TBS6908 DVB-S2 card adapter2 MAC=00:22:ab:69:08:03
Feb 18 12:24:37 tv-server kernel: [ 9.732763] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
Feb 18 12:24:37 tv-server kernel: [ 9.732871] DVB: registering new adapter (TBS PCIE DVB Adapter)
Feb 18 12:24:37 tv-server kernel: [ 9.733093] TurboSight TBS 6908 Frontend Attaching...
Feb 18 12:24:37 tv-server kernel: [ 9.735733] TurboSight TBS6908 DVB-S2 card adapter3 MAC=00:22:ab:69:08:04
Feb 18 12:24:37 tv-server kernel: [ 9.735736] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...

TV adapters.jpg (56.2 KB) TV adapters.jpg
LNB.jpg (53.1 KB) LNB.jpg
Networks.jpg (62 KB) Networks.jpg
Muxes.jpg (112 KB) Muxes.jpg

Replies (3)

RE: It will not scan - Added by Raivo Kask over 9 years ago

Could this be the problem ?
When I installed Tvheadend unstable then I changed in /etc/apt/sources.list from 'deb http://apt.tvheadend.org/unstable vivid main' to 'deb http://apt.tvheadend.org/unstable utopic main' since /unstable/dists/ didn't have 'vivid' but only 'utopic'
And now there are some compatibility issues.

RE: It will not scan - Added by Poul Kalff over 9 years ago

I've had that problem.
I've found that if you go to a terminal and give it "sudo service tvheadend restart", it will begin to scan

    (1-3/3)