Scan Q Wont go below 92 muxes?

I am on the latest tvheadend version 3.9.1353 and it seems that for at least a few versions now the scan Q wont decrease lower than 92.

It just stops and the log gives the following messages:

014-08-26 13:41:31.127 mpegts: 19999.99H in Astra-28 - tuning on Montage DS3103/TS2022 : DVB-S #0

2014-08-26 13:41:31.127 linuxdvb: Montage DS3103/TS2022 : DVB-S #0 - failed to tune [e=Invalid argument]

2014-08-26 13:41:31.127 mpegts: 19999.99H in Astra-28 - failed to start on Montage DS3103/TS2022 : DVB-S #0, try another

2014-08-26 13:41:34.970 mpegts: 10773H in Astra-28 scan complete

2014-08-26 13:41:34.970 subscription: "scan" unsubscribing

2014-08-26 13:41:35.152 mpegts: 19999.99H in Astra-28 - tuning on Montage DS3103/TS2022 : DVB-S #0

2014-08-26 13:41:35.152 linuxdvb: Montage DS3103/TS2022 : DVB-S #0 - failed to tune [e=Invalid argument]

2014-08-26 13:41:35.152 mpegts: 19999.99H in Astra-28 - failed to start on Montage DS3103/TS2022 : DVB-S #0, try another

Has anyone else been seeing this kind of behaviour? Or have an idea why its happening?

Replies (2)

RE: Scan Q Wont go below 92 muxes? - Added by steve parry about 10 years ago

Looks similar to https://tvheadend.org/boards/5/topics/12989

I get the feeling theres some bug been introduced in the latest version which effects dvb-s adapters.
You get the same error "failed to tune [e=Invalid argument]"

RE: Scan Q Wont go below 92 muxes? - Added by Al B about 10 years ago

Thanks.

It might of just been an issue with that mux I disabled that mux and the scan seems to of completed fine. Or maybe it is the bug you mentioned.

I think also that whatever was causing it might of been kinda locking the dvb-s adapters aswel as xbmc kept telling me that there were no adapters available when I have 2 S tuners enabled and working.

(1-2/2)

Project

General

Profile

Tvheadend