Tvheadend

Hi!

I now tried for about 2 days to get this bloody thing working.
I installed tvheadend as a package.
I also installed the firmeware for the dvbs stick. (http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(460e))
When I open the webgui of tvheadend only one mux is shown in the stats and the logger always says:

• diseqc setup failed -1*

uname -a

Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux

lsusb -v:

Bus 001 Device 004: ID 2013:024c PCTV Systems
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x2013 PCTV Systems
  idProduct          0x024c
  bcdDevice            1.00
  iManufacturer           1 PCTV Systems
  iProduct                2 PCTV 460e
  iSerial                 3 00000006EHP8
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

dmesg | grep dvb

[    7.720941] em28174 #0: dvb set to isoc mode.
[    7.902876] em28174 #0: Successfully loaded em28xx-dvb
[    7.923571] Em28xx: Initialized (Em28xx dvb Extension) extension
[   60.030581] i2c i2c-3: tda10071: downloading firmware from file 'dvb-fe-tda10071.fw'

Any idea what to do?

thx

ps:under windows is the stick working fine