TVH with Cine S2 v.6.5, Ubuntu 14.04, unicable
Added by Kai Schwarz over 10 years ago
Hey together,
I had a working tvheadend (stable release) running under Ubuntu 13 - same config but not unicable.
Unicable switch:
In our new house, we have a unicable setup using the following cascadable unicable switch:
It's a german switch - If you have questions concerning it, just ask.
4 LNB input lines are attached (2 vertical and 2 horizontal) and finally using the unicable output line in the building.
In my PC there is a DD Cine S2 v.6.5 installed and running under Ubuntu 14.04 (all current updates installed).
The drivers are installed as it can be found on the manufacturer's homepage (with minor changes):
DD Cine S2 v.6.5:
sudo apt-get install mercurial build-essential libproc-processtable-perl
sudo apt-get install linux-headers-`uname –r`
cd /usr/src
sudo hg clone http://linuxtv.org/hg/~endriss/media_build_experimental/
cd media_build_experimental
sudo make download
sudo make untar
sudo make clean
sudo make distclean
sudo make -j4 (to use 4 cores)
sudo make install
sudo modprobe ddbridge
sudo reboot
Kernel version is:
Linux HTPC 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
tvheadend (current git version) installation:
sudo apt-get install build-essential git pkg-config libssl-dev bzip2 wget
sudo apt-get install libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev
git clone https://github.com/tvheadend/tvheadend.git
cd tvheadend
./configure
make
./build.linux/tvheadend (started with -C first)
tvheadend config
Well, this is the part where I have no idea how I may set it up correctly.
I tried different things - could scan channels, but xmbc tells me always "No free adapter".
I am unsure where and how to setup unicable frequencies and ID/Scr correctly.
I could not find usual tutorials or informations on how to set this up. I hope anyone can explain me this step by step.
I read also things about a unicable kernel patch - but I dont know if this is still needed nor if it is available.
Many thanks in advance!
Best
Kai
Replies (29)
RE: TVH with Cine S2 v.6.5, Ubuntu 14.04, unicable - Added by Matthias Strack about 10 years ago
no,it works only on the legacy port.
unicable is still not working.
RE: TVH with Cine S2 v.6.5, Ubuntu 14.04, unicable - Added by Kai Schwarz about 10 years ago
I had problems with unicable in the past [see the ticket above], with the given patch it worked.
Maybe it is something special in your case...
RE: TVH with Cine S2 v.6.5, Ubuntu 14.04, unicable - Added by Sascha Kuehndel about 10 years ago
Matthias Strack: have you time, to meet in irc? possible sunday 18:00?
Sascha
RE: TVH with Cine S2 v.6.5, Ubuntu 14.04, unicable - Added by Matthias Strack about 10 years ago
@sascha ill be there
- « Previous
- 1
- 2
- Next »