Project

General

Profile

Forums » General »

August DVB-T210

Added by derp derp almost 11 years ago

Hi. Was wondering if this was compatible with tvheadend as there's not much information from users about this device. Does anyone have one? Is it working well with DVB-T2 channels and HD channels?

please let me know! thanks!


Replies (450)

RE: August DVB-T210 - Added by Paul Williams over 8 years ago

Any chance you could post a link to the 2.1.6 firmware so I can test?

Mine is showing a newer version (2.1.9), it works initially but falls over after less than an hour and cant tune anything.

RE: August DVB-T210 - Added by Ben Rometsch over 8 years ago

Try this:

https://db.tt/2eoUBS0S

Also attached to this message

Hopefully that works.

Unfortunately after a few days the stick crashed and I needed to reboot the pi to get things working again :( I guess a drastic solution would be to reboot in the night...Does anyone know what is causing things to fail?

dvb-tuner-si2158-a20-01.fw (3.85 KB) dvb-tuner-si2158-a20-01.fw

RE: August DVB-T210 - Added by Ben Rometsch over 8 years ago

Ha I think we replied at the same time Graham!

RE: August DVB-T210 - Added by Paul Williams over 8 years ago

Thanks for the quick response, I will give it a go and report back :)

RE: August DVB-T210 - Added by Olli Salonen over 8 years ago

I see Antti has done some work with the device. Would be interesting to hear if it works better with the dvbsky driver :
https://git.linuxtv.org/anttip/media_tree.git/log/?h=mygica_t230_pt360

RE: August DVB-T210 - Added by Paul Williams over 8 years ago

Excuse my ignorance but how do I test that?

Do I just build the media_tree from source and install as described here:

[[https://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers]]

RE: August DVB-T210 - Added by Paul Williams about 8 years ago

Well I built and installed the full media_tree from git this morning and all looking good so far, fingers crossed....

dmesg | grep dvb
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
[ 14.899309] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.135170] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.135503] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.423526] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.423937] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.423957] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.423976] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.659075] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.659511] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.670387] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.670911] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.670932] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.670960] usbcore: registered new interface driver dvb_usb_cxusb
[ 96.532071] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 97.610843] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'

(I have 2 of the same devices plugged in)

RE: August DVB-T210 - Added by Paul Williams about 8 years ago

One thing I have noticed, my channels were scanned with my Sundtek tuner originally and I have a second copy of most muxes that are plus or minus 0.25Mhz different (is this down to tuner sensitivity?).

Any channels mapped that are mapped to the 0.25Mhz different muxes play fine using the Sundtek but fail with the DVB-T210's.

Think if I set up a new network for the DVB-T210's, let that scan in the working muxes for these tuners and then map the services found to existing channels again using merge same name its the easiest way to resolve this, unless anyone had any other suggestions?

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Paul Williams wrote:

Well I built and installed the full media_tree from git this morning and all looking good so far, fingers crossed....

dmesg | grep dvb
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
[ 14.899309] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.135170] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.135503] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.423526] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.423937] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.423957] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.423976] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.659075] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.659511] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.670387] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.670911] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.670932] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.670960] usbcore: registered new interface driver dvb_usb_cxusb
[ 96.532071] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 97.610843] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'

(I have 2 of the same devices plugged in)

How long had you been running before encountering stick failures? Also what firmware versions are you running? Forgive my ignorance but does compiling media_tree only create new /lib/firmware files or is there other stuff it is doing?

RE: August DVB-T210 - Added by Olli Salonen about 8 years ago

Using media_build to compile the drivers in media_tree typically replaces all your media device drivers under /lib/modules. The firmwares in /lib/firmware are mostly closed source binaries that have been ripped from the Windows drivers of the devices. They are just transferred to the device as is when the device is started (plugged in typically). That part will be the same regardless of the operating system.

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Paul Williams wrote:

Well I built and installed the full media_tree from git this morning and all looking good so far, fingers crossed....

dmesg | grep dvb
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation

I have some experience compiling stuff but not a huge amount. I ran:

git clone git://linuxtv.org/media_build.git
cd media_build
./build

but it errors out with

./scripts/make_kconfig.pl /lib/modules/4.1.19-v7+/build /lib/modules/4.1.19-v7+/build 1
Preparing to compile for kernel version 4.1.19
File not found: /lib/modules/4.1.19-v7+/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.
Makefile:369: recipe for target 'allyesconfig' failed
make1: *** [allyesconfig] Error 2

this is on a Raspberry Pi2 running Raspbian. Any ideas?

RE: August DVB-T210 - Added by Paul Williams about 8 years ago

I'm not sure about Raspian to be honest, looks like they were having the same issues here:

https://www.raspberrypi.org/forums/viewtopic.php?t=100618

Just to give an update, both my sticks have been idle for 12 hours over night and are still working fine this morning :)

I have attached the firmware that is now being used after the media_tree install but not sure if thats all that is needed?

dvb-demod-si2168-b40-01.fw (2.66 KB) dvb-demod-si2168-b40-01.fw

RE: August DVB-T210 - Added by Olli Salonen about 8 years ago

Paul,

Do a "dmesg | grep si2168" and you'll see the firmware version printed out there. I think you have the oldest Si2168 firmware in use. Personally I've had good success with 4.0.11. 4.0.19 was a bit tricky, but I think there are improvements coming into the driver that will make 4.0.19 trouble-free as well.

You can find various SiLabs firmwares here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/ (demod)
http://palosaari.fi/linux/v4l-dvb/firmware/Si2158/ (tuner)

RE: August DVB-T210 - Added by Olli Salonen about 8 years ago

Ben,

The way you've tried to use media_build is correct. Although that way will download the latest media_tree and the suggested code is not yet in the media_build, so you would need to compile the specific branch from Antti's development repository.

However, it's a good idea first to compile the normal media_tree to see that everything works.

I've got no idea why it's failing for you. Do you have the kernel sources package installed?

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Paul Williams wrote:

I'm not sure about Raspian to be honest, looks like they were having the same issues here:

https://www.raspberrypi.org/forums/viewtopic.php?t=100618

Just to give an update, both my sticks have been idle for 12 hours over night and are still working fine this morning :)

I have attached the firmware that is now being used after the media_tree install but not sure if thats all that is needed?

That firmware file is v4.0.4 that I have been using.

RE: August DVB-T210 - Added by Zac Daman about 8 years ago

I think I have the same problem with T230 and LE alpha. T230 get somehow jammed and needs to reboot the system and change the USB port to make T230 work again.

Normally system looks like:

LibreELEC (community) Version: 7.90.004
Kodi:~ # dmesg | grep si2168
[ 16.136877] si2168 18-0064: Silicon Labs Si2168 successfully attached
[ 24.049595] si2168 18-0064: found a 'Silicon Labs Si2168-B40'
[ 24.054944] si2168 18-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 24.844042] si2168 18-0064: firmware version: 4.0.11
Kodi:~ # dmesg | grep dvb
[ 15.878400] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 16.113468] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 16.163590] dvb-usb: schedule remote query interval to 100 msecs.
[ 16.165226] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 16.165312] usbcore: registered new interface driver dvb_usb_cxusb
[ 28.873483] si2168 14-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 29.685284] si2157 15-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
Kodi:~ #

After some time (a few hours or max a day) T230 cannot tune and make >100k errors and is not usable any more. And the system looks like:

LibreELEC (community) Version: 7.90.004
Kodi:~ # dmesg | grep si2168
Kodi:~ # dmesg | grep dvb
[25918.849795] dvb-usb: bulk message failed: -110 (1/0)
[25920.853418] dvb-usb: bulk message failed: -110 (5/0)
[25922.856876] dvb-usb: bulk message failed: -110 (1/0)
[25924.860222] dvb-usb: bulk message failed: -110 (5/0)
[25926.863533] dvb-usb: bulk message failed: -110 (1/0)
[25928.867270] dvb-usb: bulk message failed: -110 (5/0)
[25930.872922] dvb-usb: bulk message failed: -110 (1/0)
[25932.874158] dvb-usb: bulk message failed: -110 (5/0)
[25934.879900] dvb-usb: bulk message failed: -110 (1/0)
[25936.880965] dvb-usb: bulk message failed: -110 (5/0)
[25938.884508] dvb-usb: bulk message failed: -110 (1/0)
[25940.887758] dvb-usb: bulk message failed: -110 (5/0)
[25942.891194] dvb-usb: bulk message failed: -110 (1/0)
[25944.894866] dvb-usb: bulk message failed: -110 (5/0)
[25946.897962] dvb-usb: bulk message failed: -110 (1/0)
[25948.898327] dvb-usb: bulk message failed: -110 (5/0)
[25950.901686] dvb-usb: bulk message failed: -110 (1/0)
[25952.905249] dvb-usb: bulk message failed: -110 (5/0)
[25954.908480] dvb-usb: bulk message failed: -110 (1/0)
[25956.912072] dvb-usb: bulk message failed: -110 (5/0)
[25958.915400] dvb-usb: bulk message failed: -110 (1/0)
[25960.918876] dvb-usb: bulk message failed: -110 (5/0)
[25962.922235] dvb-usb: bulk message failed: -110 (1/0)
[25964.925836] dvb-usb: bulk message failed: -110 (5/0)
[25966.929292] dvb-usb: bulk message failed: -110 (1/0)
[25968.932723] dvb-usb: bulk message failed: -110 (5/0)
[25970.936341] dvb-usb: bulk message failed: -110 (1/0)
[25972.939595] dvb-usb: bulk message failed: -110 (5/0)
[25974.943155] dvb-usb: bulk message failed: -110 (1/0)
... and this shit goes on and on and on.....

Based on this long forum discussion I came to conclusion that I need to try another fw version from 4.0.11 -> 4.0.19 or 4.0.4 -> or maybe newer one if there is a better firmware. And this file update is a problem to me as a rookie Linux user.

I tried to replace the .fw file with other version in /lib/firmware and the system says that I cannot replace file(s) in the Read-only file system. Tried with telnet session and sftp and no luck. Question is how to replace the file?

RE: August DVB-T210 - Added by Mark Clarkstone about 8 years ago

Izak Gambler wrote:

I think I have the same problem with T230 and LE alpha. T230 get somehow jammed and needs to reboot the system and change the USB port to make T230 work again.

Normally system looks like:

LibreELEC (community) Version: 7.90.004
Kodi:~ # dmesg | grep si2168
[ 16.136877] si2168 18-0064: Silicon Labs Si2168 successfully attached
[ 24.049595] si2168 18-0064: found a 'Silicon Labs Si2168-B40'
[ 24.054944] si2168 18-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 24.844042] si2168 18-0064: firmware version: 4.0.11
Kodi:~ # dmesg | grep dvb
[ 15.878400] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 16.113468] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 16.163590] dvb-usb: schedule remote query interval to 100 msecs.
[ 16.165226] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 16.165312] usbcore: registered new interface driver dvb_usb_cxusb
[ 28.873483] si2168 14-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 29.685284] si2157 15-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
Kodi:~ #

After some time (a few hours or max a day) T230 cannot tune and make >100k errors and is not usable any more. And the system looks like:

LibreELEC (community) Version: 7.90.004
Kodi:~ # dmesg | grep si2168
Kodi:~ # dmesg | grep dvb
[25918.849795] dvb-usb: bulk message failed: -110 (1/0)
[25920.853418] dvb-usb: bulk message failed: -110 (5/0)
[25922.856876] dvb-usb: bulk message failed: -110 (1/0)
[25924.860222] dvb-usb: bulk message failed: -110 (5/0)
[25926.863533] dvb-usb: bulk message failed: -110 (1/0)
[25928.867270] dvb-usb: bulk message failed: -110 (5/0)
[25930.872922] dvb-usb: bulk message failed: -110 (1/0)
[25932.874158] dvb-usb: bulk message failed: -110 (5/0)
[25934.879900] dvb-usb: bulk message failed: -110 (1/0)
[25936.880965] dvb-usb: bulk message failed: -110 (5/0)
[25938.884508] dvb-usb: bulk message failed: -110 (1/0)
[25940.887758] dvb-usb: bulk message failed: -110 (5/0)
[25942.891194] dvb-usb: bulk message failed: -110 (1/0)
[25944.894866] dvb-usb: bulk message failed: -110 (5/0)
[25946.897962] dvb-usb: bulk message failed: -110 (1/0)
[25948.898327] dvb-usb: bulk message failed: -110 (5/0)
[25950.901686] dvb-usb: bulk message failed: -110 (1/0)
[25952.905249] dvb-usb: bulk message failed: -110 (5/0)
[25954.908480] dvb-usb: bulk message failed: -110 (1/0)
[25956.912072] dvb-usb: bulk message failed: -110 (5/0)
[25958.915400] dvb-usb: bulk message failed: -110 (1/0)
[25960.918876] dvb-usb: bulk message failed: -110 (5/0)
[25962.922235] dvb-usb: bulk message failed: -110 (1/0)
[25964.925836] dvb-usb: bulk message failed: -110 (5/0)
[25966.929292] dvb-usb: bulk message failed: -110 (1/0)
[25968.932723] dvb-usb: bulk message failed: -110 (5/0)
[25970.936341] dvb-usb: bulk message failed: -110 (1/0)
[25972.939595] dvb-usb: bulk message failed: -110 (5/0)
[25974.943155] dvb-usb: bulk message failed: -110 (1/0)
... and this shit goes on and on and on.....

Based on this long forum discussion I came to conclusion that I need to try another fw version from 4.0.11 -> 4.0.19 or 4.0.4 -> or maybe newer one if there is a better firmware. And this file update is a problem to me as a rookie Linux user.

I tried to replace the .fw file with other version in /lib/firmware and the system says that I cannot replace file(s) in the Read-only file system. Tried with telnet session and sftp and no luck. Question is how to replace the file?

I believe you create the folder firmware in your storage path (usually /storage/.config/) so mkdir /storage/.config/firmware should do it, place the file there and it'll override the default on next boot.

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Paul Williams wrote:

Well I built and installed the full media_tree from git this morning and all looking good so far, fingers crossed....

dmesg | grep dvb
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
fb6609280db902bd5d34445fba1c926e95e63914 [media] dvb_frontend: Use memdup_user() rather than duplicating its implementation
[ 14.899309] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.135170] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.135503] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.423526] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.423937] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.423957] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.423976] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
[ 15.659075] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.659511] dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.670387] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.670911] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.670932] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
[ 15.670960] usbcore: registered new interface driver dvb_usb_cxusb
[ 96.532071] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 97.610843] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'

(I have 2 of the same devices plugged in)

Hi Paul,

Is your stick stable now with the build you put together?

RE: August DVB-T210 - Added by Paul Williams about 8 years ago

Everything has been pretty solid for approx 1 week now that I addressed the 2nd issue of muxes being identified as 0.25mhz off from my other tuner.

This is with the standard media_build (not including the patch mentioned earlier in this thread) and 4.0.11 firmware installed.

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Ugh - compiling media_build with Raspbian looks like it's beyond my knowledge - really frustrating! If anyone has simple instructions on how to do that I would really appreciate it! For the record I'm getting this:

make2: Leaving directory '/root/linuxtv/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/4.1.19-v7+/build /lib/modules/4.1.19-v7+/build 1
Preparing to compile for kernel version 4.1.19
File not found: /lib/modules/4.1.19-v7+/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.
Makefile:369: recipe for target 'allyesconfig' failed
make1: * [allyesconfig] Error 2
make1: Leaving directory '/root/linuxtv/media_build/v4l'
Makefile:26: recipe for target 'allyesconfig' failed
make: * [allyesconfig] Error 2
can't select all drivers at ./build line 490.

I think I need to install the kernel headers/sources but googling it is not coming back with simple solutions!

RE: August DVB-T210 - Added by Olli Salonen about 8 years ago

Hi Ben,

Update your media_build first:
https://www.mail-archive.com/[email protected]/msg102197.html

Cheers,
-olli

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

I dont think that's the issue - I'm still getting the error:

https://gist.github.com/dabeeeenster/e1d5b45a5069665531c3716594c548fc

I think it's related to not having the kernel sources from Raspbian but I cant figure out how to do that, which seems crazy but there you go! Is anyone else running Raspbian and able to provide instructions?

RE: August DVB-T210 - Added by Adam Bowen about 8 years ago

I successfully cross-compiled media_build for raspbian, but that was before the stick was supported by the media_build that was included with the kernel package. As soon as the kernel included it, I stopped building it myself, because to be honest, it was a pain in the arse. Whenever I updated the kernel I'd have to remember to re-install my media_build version.

Are you on Jesse or Wheezy? The only issue I had recently (which I've also mentioned previously in this thread) was the need to update my firmware to the .11 version when I upgraded my Pi2 to Jesse. Before that, on Wheezy, I used the .4 version. Both have been rock solid on my setup with two sticks plugged in.

If you are still intent upon building your own media_build, I can send you my notes on cross-compiling it later on (I've not got access to them at the minute).

RE: August DVB-T210 - Added by Ben Rometsch about 8 years ago

Hi Adam.

Thanks for the help. Maybe I'm confused - are you saying that I dont need to compile anything and just run what's set in the default raspbian packages? I'm on Wheezy.

I am using these drivers:

  1. dmesg | grep si21
    [ 4.079391] si2168 3-0064: Silicon Labs Si2168 successfully attached
    [ 4.109042] si2157 4-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
    [ 25.540878] si2168 3-0064: found a 'Silicon Labs Si2168-B40'
    [ 25.545609] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
    [ 26.127536] si2168 3-0064: firmware version: 4.0.4
    [ 26.139483] si2157 4-0060: found a 'Silicon Labs Si2158-A20'
    [ 26.140838] si2157 4-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
    [ 27.178642] si2157 4-0060: firmware version: 2.1.6

Maybe it's worth me trying 4.0.11? What version fo dvb-tuner-si2158-a20-01.fw are you running?

Thanks!

(301-325/450)