L4M twin s2 + flex s2: "Unpassender IOCTL (I/O-Control) für das Gerät"
Added by Tante oongi almost 11 years ago
Hi,
i'm trying to use my l4m twin s2 (v6.2) whith a flex s2-modul on a debian wheezy system. The error occurs with the stable and the beta version of tvheadend.
The four tuners of the cards are shown in the webfrontend of tvheadend. They are named "STV090x Multistandard" (under Configuration->DVB Inputs->TV Adapters). If I enable the tuners, click on "Add DVB Network by location..." and choose "Astra_19_2E", I get the error message
"dvb: "/dev/dvb/adapter0" tuning to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" -- Front configuration failed -- Unpassender IOCTL (I/O-Control) für das Gerät, frequency: 1951500"
and the search for the channels isn't started.
Hardware Device path: /dev/dvb/adapter3 Device name: STV090x Multistandard Host connection: PCI Intermediate Frequency range: 950000 kHz - 2150000 kHz, in steps of 0 kHz Symbolrate range: 1000000 Baud - 45000000 Baud Status Currently tuned to: Services: 0 Muxes: 1 Muxes awaiting initial scan: 0 Signal Strength: 0% Bit Error Rate: 0/s Uncorrected Bit Errors: 0/s
This is the output of dmesg:
# dmesg | grep -i dvb [ 3.676522] DDBridge driver detected: Digital Devices Cine S2 V6 DVB adapter [ 3.677369] Port 0 (TAB 1): DUAL DVB-S2 [ 3.678500] Port 2 (TAB 3): DUAL DVB-S2 [ 3.678739] DVB: registering new adapter (DDBridge) [ 4.581078] DDBridge 0000:02:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... [ 4.581123] DVB: registering new adapter (DDBridge) [ 4.617506] DDBridge 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)... [ 4.617560] DVB: registering new adapter (DDBridge) [ 4.785573] DDBridge 0000:02:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)... [ 4.785618] DVB: registering new adapter (DDBridge) [ 4.821600] DDBridge 0000:02:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...
lspci:
02:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus LE DVB adapter [dd01:0003] Subsystem: Digital Devices GmbH Device [dd01:0020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [90] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range A, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=00c <?> Kernel driver in use: DDBridge
kernel:
# uname -a Linux server 3.12-0.bpo.1-amd64 #1 SMP Debian 3.12.6-2~bpo70+1 (2014-01-07) x86_64 GNU/Linux
Any hints?
Thanks!
Replies (1)
RE: L4M twin s2 + flex s2: "Unpassender IOCTL (I/O-Control) für das Gerät" - Added by Tante oongi almost 11 years ago
The error message in english is:
"dvb: "/dev/dvb/adapter0" tuning to "12,551,500 kHz Vertical (Default (Port 0, Universal LNB))" -- Front configuration failed -- Inappropriate ioctl for device, frequency: 1951500"
Meanwhile I set up a fresh ubuntu test system: On this system the error didn't occur. So there can't be a hardware defect (card) or cable defect.