Project

General

Profile

What am I doing wrong!!! Wintv-HVR-1800

Added by Michael Patton almost 11 years ago

Here is what my dmesg says.

[ 9.971495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.971497] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 9.971501] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 9.971503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.971505] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 9.971508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.971508] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.994606] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 10.025924] wmi: Mapper loaded
[ 10.041572] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 10.042379] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 10.043250] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 10.044110] microcode: Microcode Update Driver: v2.00 <>, Peter Oruba
[ 10.391688] mei 0000:00:16.0: setting latency timer to 64
[ 10.391735] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 10.399452] mei 0000:00:16.0: wd: failed to find the client
[ 10.775410] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.812976] Linux video capture interface: v2.00
[ 10.822777] device-mapper: multipath: version 1.4.0 loaded
[ 11.269101] RPC: Registered named UNIX socket transport module.
[ 11.269104] RPC: Registered udp transport module.
[ 11.269105] RPC: Registered tcp transport module.
[ 11.269107] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.503324] FS-Cache: Loaded
[ 11.568763] NFS: Registering the id_resolver key type
[ 11.568772] Key type id_resolver registered
[ 11.568773] Key type id_legacy registered
[ 11.568778] FS-Cache: Netfs 'nfs' registered for caching
[ 11.570922] cx23885 driver version 0.0.3 loaded
[ 11.571114] CORE cx238850: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
[ 11.636689] Installing knfsd (copyright (C) 1996 ).
[ 11.956253] tveeprom 8-0050: Hauppauge model 78521, rev C1E9, serial# 3196599
[ 11.956257] tveeprom 8-0050: MAC address is 00:0d:fe:30:c6:b7
[ 11.956259] tveeprom 8-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 11.956261] tveeprom 8-0050: TV standards NTSC ATSC/DVB Digital (eeprom 0x88)
[ 11.956263] tveeprom 8-0050: audio processor is CX23887 (idx 42)
[ 11.956265] tveeprom 8-0050: decoder processor is CX23887 (idx 37)
[ 11.956266] tveeprom 8-0050: has radio
[ 11.956268] cx238850: hauppauge eeprom: model=78521
[ 12.207753] cx25840 10-0044: cx23887 A/V decoder found 0x88 (cx23885[0])
[ 12.326803] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 12.736759] init: failsafe main process (804) killed by TERM signal
[ 12.992848] cx25840 10-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 13.140814] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.140898] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.140963] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.141023] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.141084] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.141142] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.141199] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.141263] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.141319] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.168341] tuner 9-0042: Tuner -1 found with type(s) Radio TV.
[ 13.204752] tda829x 9-0042: could not clearly identify tuner address, defaulting to 60
[ 13.228094] tda18271 9-0060: creating new instance
[ 13.264185] TDA18271HD/C1 detected
9-0060
[ 14.239389] ppdev: user-space parallel port driver
[ 14.432191] tda829x 9-0042: type set to tda8295+18271
[ 15.536288] cx238850: registered device video0 [v4l2]
[ 15.536343] cx238850: registered device vbi0
[ 15.536604] cx238850: registered ALSA audio device
[ 15.976080] lirc_dev: IR Remote Control driver registered, major 250
[ 16.349523] init: xbmcbuntu-wait (lightdm) main process (1036) killed by TERM signal
[ 16.349807] init: xbmcbuntu-wait (ubiquity) main process (1038) killed by TERM signal
[ 16.639610] cx238850: registered device video1 [mpeg]
[ 16.639629] Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x7b4dfdb7, cmd = PING_FW
[ 17.560695] r8169 0000:02:00.0: eth0: link down
[ 17.560726] r8169 0000:02:00.0: eth0: link down
[ 17.560820] IPv6: ADDRCONF: eth0: link is not ready
[ 18.812187] IPv6: ADDRCONF: eth0: link is not ready
[ 19.211740] cx23885_dvb_register() allocating 1 frontend(s)
[ 19.211747] cx238850: cx23885 based dvb card
[ 19.233998] r8169 0000:02:00.0: eth0: link up
[ 19.234071] IPv6: ADDRCONF: eth0: link becomes ready
[ 19.417985] MT2131: successfully identified at address 0x61
[ 19.419636] DVB: registering new adapter (cx238850)
[ 19.419637] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 19.420060] cx23885_dev_checkrevision() Hardware revision = 0xb1
[ 19.420066] cx238850/0: found at 0000:03:00.0, rev: 15, irq: 18, latency: 0, mmio: 0xf7c00000
[ 248.132595] DVB: adapter 0 frontend 0 frequency 999000000 out of range (54000000..858000000)
[ 267.464806] DVB: adapter 0 frontend 0 frequency 993000000 out of range (54000000..858000000)
[ 287.474314] DVB: adapter 0 frontend 0 frequency 987000000 out of range (54000000..858000000)
[ 307.483805] DVB: adapter 0 frontend 0 frequency 981000000 out of range (54000000..858000000)
[ 327.493272] DVB: adapter 0 frontend 0 frequency 975000000 out of range (54000000..858000000)
[ 347.502737] DVB: adapter 0 frontend 0 frequency 969000000 out of range (54000000..858000000)
[ 367.512278] DVB: adapter 0 frontend 0 frequency 963000000 out of range (54000000..858000000)
[ 387.521790] DVB: adapter 0 frontend 0 frequency 957000000 out of range (54000000..858000000)
[ 407.531261] DVB: adapter 0 frontend 0 frequency 951000000 out of range (54000000..858000000)
[ 427.540726] DVB: adapter 0 frontend 0 frequency 945000000 out of range (54000000..858000000)
[ 447.550238] DVB: adapter 0 frontend 0 frequency 939000000 out of range (54000000..858000000)
[ 467.559729] DVB: adapter 0 frontend 0 frequency 933000000 out of range (54000000..858000000)

It shows up in the Tvheadend http://localhost:9981 as Samsung S5H1409 QAM/8VSB Frontend. When I scan though nothing shows up in services. What am I doing wrong? I have already downloaded the latest firmware and added them (overwrote existing) to the firmware directory.

I am connected to my Suddenlink Cable Coax.