Digital Devices C/T

Added by Rüdiger Gubler almost 11 years ago

Hello,

I've built a TV-server with a DigitalDevices Cine C/T and DuoFlex C/T.
The DuoFlex is connected with the small flat cable to the Cine card.

I installed the media-build-experimental-dkms drivers.

tvheadend shows only the two devices from the Cine C/T the DuoFlex C/T is not shown.
I removed the flat cable between the two cards to check it out.

Is there an issue with the new bought cards or is there a configuration error?

Yours Tolotos

Replies (2)

RE: Digital Devices C/T - Added by Hanspeter Müller almost 11 years ago

Hiya,

the DuoFlex needs power on the floppy-power-connector on the end of the card, took me a week to get the right adapter

(and yes, DigitalDevices should be kicked hard, there was absolutely NO documentation in the case...)

Greetings,

/hanspeter...

RE: Digital Devices C/T - Added by Rüdiger Gubler almost 11 years ago

Hi,

they should be double kicked because I have a new C/T/T2 which has included the power cable but the documentation (printed on the box) says:

"Only needed for SATELLITE cards!"

I have connected the power cable now and had to build the drivers from the repository to get a driver which supports the new C/T/T2 card.
Now it works. The first test recordings are done ;-)

Yours Tolotos

(1-2/2)

Project

General

Profile

Tvheadend