Project

General

Profile

Tvheadend after day or two all inputs stop working until I disable and reenable them using the webui.

Added by C Weng over 3 years ago

OS: Linux Gentoo
Version: 4.2.8
I run 2x TBS 6902 using unicable and 1 cinergy s2 usb HD with a legacy connection to the LNB.
Driver for TBS that I use is from https://github.com/AlexanderS/tbsecp3-driver .

After a while (like a day or two) it can't record on any of the inputs anymore.

If I disable all the Inputs in Tvheadend and then reactivate them (over webui) it starts working again.
Any chance anyone knows what I could try to fix this?


Replies (3)

RE: Tvheadend after day or two all inputs stop working until I disable and reenable them using the webui. - Added by C Weng over 3 years ago

dmesg -T during times where it starts and is ongoing does only show "set frontends"
tvheadend log from since last restart of server is in attachments.
The show that just now did not get recorded should have started recording 17:01:30
Currently through only 1 of the 2 TBS cards (both adapters of that one card) does not work, tvheadend tries to tune on it through and never tries the others with same or lower priority. If i force it to the others by higher priority they work for now.

Will post an other logs once the others are failed too.

[Fri May 28 14:09:05 2021] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[Fri May 28 14:09:05 2021] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[Fri May 28 14:09:05 2021] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[Fri May 28 14:09:05 2021] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[Fri May 28 14:09:05 2021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[Fri May 28 14:09:05 2021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[Fri May 28 14:09:05 2021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Fri May 28 14:09:05 2021] usb usb3: Product: EHCI Host Controller
[Fri May 28 14:09:05 2021] usb usb3: Manufacturer: Linux 5.10.27-gentoo ehci_hcd
[Fri May 28 14:09:05 2021] usb usb3: SerialNumber: 0000:00:1d.0
[Fri May 28 14:09:05 2021] hub 3-0:1.0: USB hub found
[Fri May 28 14:09:05 2021] hub 3-0:1.0: 2 ports detected
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: xHCI Host Controller
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:f1:3d:48
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[Fri May 28 14:09:05 2021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[Fri May 28 14:09:05 2021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Fri May 28 14:09:05 2021] usb usb5: Product: xHCI Host Controller
[Fri May 28 14:09:05 2021] usb usb5: Manufacturer: Linux 5.10.27-gentoo xhci-hcd
[Fri May 28 14:09:05 2021] usb usb5: SerialNumber: 0000:09:00.0
[Fri May 28 14:09:05 2021] hub 5-0:1.0: USB hub found
[Fri May 28 14:09:05 2021] hub 5-0:1.0: 2 ports detected
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: xHCI Host Controller
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
[Fri May 28 14:09:05 2021] xhci_hcd 0000:09:00.0: Host supports USB 3.0 SuperSpeed
[Fri May 28 14:09:05 2021] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[Fri May 28 14:09:05 2021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[Fri May 28 14:09:05 2021] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Fri May 28 14:09:05 2021] usb usb6: Product: xHCI Host Controller
[Fri May 28 14:09:05 2021] usb usb6: Manufacturer: Linux 5.10.27-gentoo xhci-hcd
[Fri May 28 14:09:05 2021] usb usb6: SerialNumber: 0000:09:00.0
[Fri May 28 14:09:05 2021] hub 6-0:1.0: USB hub found
[Fri May 28 14:09:05 2021] hub 6-0:1.0: 2 ports detected
[Fri May 28 14:09:05 2021] i2c i2c-10: av201x: Airoha Technology AV201x successfully attached
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[Fri May 28 14:09:05 2021] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[Fri May 28 14:09:05 2021] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:04:00.0: MAC address 00:22:ab:f1:3d:49
[Fri May 28 14:09:05 2021] e1000e 0000:00:19.0 eth2: (PCI Express:2.5GT/s:Width x1) c8:60:00:e3:b5:3b
[Fri May 28 14:09:05 2021] e1000e 0000:00:19.0 eth2: Intel(R) PRO/1000 Network Connection
[Fri May 28 14:09:05 2021] e1000e 0000:00:19.0 eth2: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[Fri May 28 14:09:05 2021] i2c i2c-9: av201x: Airoha Technology AV201x successfully attached
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:04:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:04:00.0: TurboSight TBS 6902 DVB-S/S2 : PCI 0000:04:00.0, IRQ 61, MMIO 0xf7d00000
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: enabling device (0100 -> 0102)
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: TurboSight TBS 6902 DVB-S/S2
[Fri May 28 14:09:05 2021] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[Fri May 28 14:09:05 2021] usb 1-1: new high-speed USB device number 2 using ehci-pci
[Fri May 28 14:09:05 2021] usb 3-1: new high-speed USB device number 2 using ehci-pci
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: MAC address 00:22:ab:f1:41:d2
[Fri May 28 14:09:05 2021] i2c i2c-15: Added multiplexed i2c bus 18
[Fri May 28 14:09:05 2021] i2c i2c-15: Added multiplexed i2c bus 19
[Fri May 28 14:09:05 2021] i2c i2c-19: av201x: Airoha Technology AV201x successfully attached
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[Fri May 28 14:09:05 2021] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[Fri May 28 14:09:05 2021] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[Fri May 28 14:09:05 2021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Fri May 28 14:09:05 2021] hub 1-1:1.0: USB hub found
[Fri May 28 14:09:05 2021] hub 1-1:1.0: 6 ports detected
[Fri May 28 14:09:05 2021] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[Fri May 28 14:09:05 2021] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Fri May 28 14:09:05 2021] hub 3-1:1.0: USB hub found
[Fri May 28 14:09:05 2021] hub 3-1:1.0: 8 ports detected
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: MAC address 00:22:ab:f1:41:d3
[Fri May 28 14:09:05 2021] i2c i2c-14: Added multiplexed i2c bus 20
[Fri May 28 14:09:05 2021] i2c i2c-14: Added multiplexed i2c bus 21
[Fri May 28 14:09:05 2021] i2c i2c-21: av201x: Airoha Technology AV201x successfully attached
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[Fri May 28 14:09:05 2021] TBSECP3 driver 0000:05:00.0: TurboSight TBS 6902 DVB-S/S2 : PCI 0000:05:00.0, IRQ 72, MMIO 0xf7c00000
[Fri May 28 14:09:06 2021] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[Fri May 28 14:09:06 2021] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[Fri May 28 14:09:06 2021] Fusion MPT base driver 3.04.20
[Fri May 28 14:09:06 2021] Copyright (c) 1999-2008 LSI Corporation
[Fri May 28 14:09:06 2021] Fusion MPT SPI Host driver 3.04.20
[Fri May 28 14:09:06 2021] Fusion MPT FC Host driver 3.04.20
[Fri May 28 14:09:06 2021] Fusion MPT SAS Host driver 3.04.20
[Fri May 28 14:09:06 2021] 3ware Storage Controller device driver for Linux v1.26.02.003.
[Fri May 28 14:09:06 2021] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[Fri May 28 14:09:06 2021] Adaptec aacraid driver 1.2.1[50983]-custom
[Fri May 28 14:09:06 2021] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[Fri May 28 14:09:06 2021] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[Fri May 28 14:09:06 2021] megasas: 07.714.04.00-rc1
[Fri May 28 14:09:06 2021] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k.
[Fri May 28 14:09:06 2021] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[Fri May 28 14:09:06 2021] mpt3sas version 35.100.00.00 loaded
[Fri May 28 14:09:06 2021] usbcore: registered new interface driver usb-storage
[Fri May 28 14:09:06 2021] uhci_hcd: USB Universal Host Controller Interface driver
[Fri May 28 14:09:06 2021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Fri May 28 14:09:06 2021] ohci-pci: OHCI PCI platform driver
[Fri May 28 14:09:06 2021] async_tx: api initialized (async)
[Fri May 28 14:09:06 2021] device-mapper: raid: Loading target version 1.15.1
[Fri May 28 14:09:06 2021] JFS: nTxBlock = 8192, nTxLock = 65536
[Fri May 28 14:09:06 2021] fuse: init (API version 7.32)
[Fri May 28 14:09:06 2021] e1000: Intel(R) PRO/1000 Network Driver
[Fri May 28 14:09:06 2021] e1000: Copyright (c) 1999-2006 Intel Corporation.
[Fri May 28 14:09:06 2021] iscsi: registered transport (tcp)
[Fri May 28 14:09:06 2021] usb 1-1.5: New USB device found, idVendor=0ccd, idProduct=00b0, bcdDevice= 0.00
[Fri May 28 14:09:06 2021] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Fri May 28 14:09:06 2021] usb 1-1.5: Product: USB Stick
[Fri May 28 14:09:06 2021] usb 1-1.5: Manufacturer: Max
[Fri May 28 14:09:06 2021] usb 1-1.5: SerialNumber: 080116
[Fri May 28 14:09:06 2021] dw2102: su3000_identify_state
[Fri May 28 14:09:06 2021] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.2' in warm state.
[Fri May 28 14:09:06 2021] dw2102: su3000_power_ctrl: 1, initialized 0
[Fri May 28 14:09:06 2021] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[Fri May 28 14:09:06 2021] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.2)
[Fri May 28 14:09:06 2021] usb 1-1.5: media controller created
[Fri May 28 14:09:06 2021] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
[Fri May 28 14:09:06 2021] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[Fri May 28 14:09:06 2021] device-mapper: multipath round-robin: version 1.2.0 loaded
[Fri May 28 14:09:06 2021] usb 4-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[Fri May 28 14:09:06 2021] usb 4-4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[Fri May 28 14:09:06 2021] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Fri May 28 14:09:06 2021] usb 4-4: Product: DataTraveler 3.0
[Fri May 28 14:09:06 2021] usb 4-4: Manufacturer: Kingston
[Fri May 28 14:09:06 2021] usb 4-4: SerialNumber: E0D55EA573F4F49109BB15BF
[Fri May 28 14:09:06 2021] usb-storage 4-4:1.0: USB Mass Storage device detected
[Fri May 28 14:09:06 2021] scsi host6: usb-storage 4-4:1.0
[Fri May 28 14:09:06 2021] DS3000 chip version: 0.192 attached.
[Fri May 28 14:09:06 2021] ts2020 22-0060: Montage Technology TS2020 successfully identified
[Fri May 28 14:09:06 2021] dw2102: Attached DS3000/TS2020!
[Fri May 28 14:09:06 2021] usb 1-1.5: DVB: registering adapter 4 frontend 0 (Montage Technology DS3000)...
[Fri May 28 14:09:06 2021] dvbdev: dvb_create_media_entity: media entity 'Montage Technology DS3000' registered.
[Fri May 28 14:09:06 2021] Registered IR keymap rc-su3000
[Fri May 28 14:09:06 2021] rc rc0: Terratec Cinergy S2 USB HD Rev.2 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0
[Fri May 28 14:09:06 2021] input: Terratec Cinergy S2 USB HD Rev.2 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0/input13
[Fri May 28 14:09:06 2021] dvb-usb: schedule remote query interval to 150 msecs.
[Fri May 28 14:09:06 2021] dw2102: su3000_power_ctrl: 0, initialized 1
[Fri May 28 14:09:06 2021] dvb-usb: Terratec Cinergy S2 USB HD Rev.2 successfully initialized and connected.
[Fri May 28 14:09:06 2021] usbcore: registered new interface driver dw2102
[Fri May 28 14:09:06 2021] urandom_read: 3 callbacks suppressed
[Fri May 28 14:09:06 2021] random: lvm: uninitialized urandom read (4 bytes read)
[Fri May 28 14:09:07 2021] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
[Fri May 28 14:09:07 2021] sd 6:0:0:0: Attached scsi generic sg3 type 0
[Fri May 28 14:09:07 2021] sd 6:0:0:0: [sdd] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[Fri May 28 14:09:07 2021] sd 6:0:0:0: [sdd] Write Protect is off
[Fri May 28 14:09:07 2021] sd 6:0:0:0: [sdd] Mode Sense: 4f 00 00 00
[Fri May 28 14:09:07 2021] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Fri May 28 14:09:07 2021] sdd: sdd1
[Fri May 28 14:09:07 2021] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[Fri May 28 14:09:10 2021] random: cryptsetup: uninitialized urandom read (2 bytes read)
[Fri May 28 14:09:10 2021] random: lvm: uninitialized urandom read (4 bytes read)
[Fri May 28 14:09:10 2021] random: lvm: uninitialized urandom read (2 bytes read)
[Fri May 28 14:09:11 2021] random: crng init done
[Fri May 28 14:09:12 2021] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[Fri May 28 14:09:16 2021] udevd[2438]: starting version 3.2.10
[Fri May 28 14:09:17 2021] udevd[2438]: starting eudev-3.2.10
[Fri May 28 14:09:17 2021] e1000e 0000:00:19.0 eno1: renamed from eth2
[Fri May 28 14:09:17 2021] BTRFS: device fsid d75eac05-1584-40f7-9ca1-6eb080b03174 devid 1 transid 4905 /dev/nvme0n1p1 scanned by udevd (2574)
[Fri May 28 14:09:17 2021] mlx4_core 0000:01:00.0 enp1s0: renamed from eth0
[Fri May 28 14:09:17 2021] mlx4_core 0000:01:00.0 enp1s0d1: renamed from eth1
[Fri May 28 14:09:18 2021] md/raid:md0: device sdb1 operational as raid disk 1
[Fri May 28 14:09:18 2021] md/raid:md0: device sda1 operational as raid disk 0
[Fri May 28 14:09:18 2021] md/raid:md0: raid level 5 active with 2 out of 2 devices, algorithm 2
[Fri May 28 14:09:18 2021] md0: detected capacity change from 0 to 2000161341440
[Fri May 28 14:09:18 2021] md0: p1
[Fri May 28 14:09:19 2021] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,discard
[Fri May 28 14:09:20 2021] Adding 36700156k swap on /dev/mapper/vg1-swap. Priority:-2 extents:1 across:36700156k
[Fri May 28 14:09:20 2021] EXT4-fs (dm-3): mounting with "discard" option, but the device does not support discard
[Fri May 28 14:09:20 2021] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
[Fri May 28 14:09:20 2021] BTRFS info (device nvme0n1p1): turning on sync discard
[Fri May 28 14:09:20 2021] BTRFS info (device nvme0n1p1): enabling ssd optimizations
[Fri May 28 14:09:20 2021] BTRFS info (device nvme0n1p1): disk space caching is enabled
[Fri May 28 14:09:20 2021] BTRFS info (device nvme0n1p1): has skinny extents
[Fri May 28 14:09:20 2021] EXT4-fs (md0p1): mounted filesystem with ordered data mode. Opts: (null)
[Fri May 28 14:09:23 2021] 8021q: 802.1Q VLAN Support v1.8
[Fri May 28 14:09:23 2021] mlx4_en: enp1s0: Steering Mode 1
[Fri May 28 14:09:23 2021] 8021q: adding VLAN 0 to HW filter on device enp1s0
[Fri May 28 14:09:23 2021] mlx4_en: enp1s0d1: Steering Mode 1
[Fri May 28 14:09:23 2021] 8021q: adding VLAN 0 to HW filter on device enp1s0d1
[Fri May 28 14:09:23 2021] 8021q: adding VLAN 0 to HW filter on device bond0
[Fri May 28 14:09:28 2021] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[Fri May 28 14:09:28 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[Fri May 28 14:09:33 2021] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[Fri May 28 14:09:33 2021] NFSD: Using legacy client tracking operations.
[Fri May 28 14:09:33 2021] NFSD: starting 90-second grace period (net f0000098)
[Fri May 28 14:09:49 2021] dw2102: su3000_power_ctrl: 1, initialized 1
[Fri May 28 14:09:49 2021] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[Fri May 28 14:09:50 2021] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[Fri May 28 14:09:51 2021] usb 1-1.5: DVB: adapter 4 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:09:51 2021] dw2102: su3000_power_ctrl: 0, initialized 1
[Fri May 28 14:09:51 2021] dw2102: su3000_power_ctrl: 1, initialized 1
[Fri May 28 14:09:51 2021] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[Fri May 28 14:09:51 2021] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[Fri May 28 14:09:51 2021] TBSECP3 driver 0000:05:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:09:52 2021] TBSECP3 driver 0000:05:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:09:52 2021] TBSECP3 driver 0000:04:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:09:53 2021] TBSECP3 driver 0000:04:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:10:51 2021] set frontends
[Fri May 28 14:10:52 2021] set frontends
[Fri May 28 14:11:33 2021] set frontends
[Fri May 28 14:11:34 2021] set frontends
[Fri May 28 14:12:49 2021] set frontends
[Fri May 28 14:12:49 2021] set frontends
[Fri May 28 14:13:19 2021] set frontends
[Fri May 28 14:13:19 2021] set frontends
[Fri May 28 14:13:35 2021] dw2102: su3000_power_ctrl: 0, initialized 1
[Fri May 28 14:14:16 2021] dw2102: su3000_power_ctrl: 1, initialized 1
[Fri May 28 14:14:16 2021] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[Fri May 28 14:14:16 2021] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[Fri May 28 14:14:19 2021] dw2102: su3000_power_ctrl: 0, initialized 1
[Fri May 28 14:14:19 2021] dw2102: su3000_power_ctrl: 1, initialized 1
[Fri May 28 14:14:19 2021] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[Fri May 28 14:14:19 2021] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[Fri May 28 14:14:19 2021] TBSECP3 driver 0000:05:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000)
[Fri May 28 14:14:20 2021] set frontends
[Fri May 28 14:14:23 2021] set frontends
[Fri May 28 14:14:23 2021] set frontends
[Fri May 28 14:15:19 2021] set frontends
[Fri May 28 14:15:19 2021] set frontends
[Fri May 28 14:16:23 2021] set frontends
[Fri May 28 14:16:55 2021] set frontends
[Fri May 28 14:18:40 2021] set frontends
[Fri May 28 17:01:30 2021] set frontends
[Fri May 28 18:33:39 2021] set frontends
[Fri May 28 18:33:52 2021] set frontends

RE: Tvheadend after day or two all inputs stop working until I disable and reenable them using the webui. - Added by C Weng over 3 years ago

After some more investigation it turns out that for what ever reason the LNB seems to break if I use unicable with SCRID 0 and frequencey 1210Mhz, if I do not use that one no adapter stops working ever for days at least.
As soon as i use that unicable channel (which is specified for the LNB) something in the LNB seems to break..... The other 3 (1/1420,2/1680,3/2040) seem to work fine..
(some recordings still fail through, but that is probably sth else)

Gonna just get a new LNB and hope it goes away, they are cheap anyway.

    (1-3/3)