Project

General

Profile

Forums » Tutorial and setups »

Tvheadend as SATIP Server doesn't work

Added by Knud Loges almost 7 years ago

Hi guys,

I tired to activate he SAT IP Server of tvheadend but without no success. I configured the network sat ip number to 1, exported 2x dvb-c tuner (I have two dvb-c tuner) and enable the SAT IP Server with entering the port 9983. In the log tvheadend seems to start the sat ip service without any errors. I tired to access the sat ip server via dvbviewer lite but it seems that it isn't able to connect to the SAT IP server. The server seems to be not announced in the local network. Also Aurora TV an SAT IP Software couldn't find any tuner. We also forwared the port 554 to 9983. A check via telnet show that both port 554 and 9983 can be reached but as i mention already the Sat IP Server seems to be no annouced and can't be found in the network.

Any idea what i missed to configure. A short howto would be helpfull.

Regards,
Knud Loges


Replies (2)

RE: Tvheadend as SATIP Server doesn't work - Added by Alex Damhuis over 6 years ago

Did you add your cablenetwork and set the Sat>IP Source number to 1 ?

I had to do that to get the SAT>IP server work...

Cheers
Alex

    (1-2/2)