Forums » Tutorial and setups »
Selfsat 36
Added by Michael Post over 8 years ago
Hello,
in the last years i used an hd-usb-dvb-s-Stick to stream hd channels to my rasbperry which works fine.
Now i moved to another location and here i have a selfsat ip36 sat->ip-system, which works fine with the mobile app "Tizen" on android and and my local (BNC-Cable-Connected) tv.
In tvheadend the Sat->Ip DVB-S Tuner was automaticaly found with all 8 Tuners and 4 Positions for every Tuner.
But i do not know how to configure one tuner to get a stream of it.
I was playing around networks and muxes but i can not find the right solution.
Do you have any hint for me to get Astra 19.2 working?
Which are the correct settings at network and muxes?
Thanks a lot,
Michael
Replies (2)
RE: Selfsat 36 - Added by Kev S about 8 years ago
I've not got the Selfsat, but on my Triax you need to do the following:-
Firstly add a Network with the following options
Then go to the TV Adapters tab and for each of the tuners select the "yellow folder" item a change Satellite Positions to 1
When you save the number of green icons should drop to just 1 - now click on this and choose the Network you created earlier
green.png (39.1 KB) green.png | |||
network.png (30.3 KB) network.png | |||
yellow.png (41.7 KB) yellow.png |