Tvheadend

Hi All,
I know that there are posts on with similar issues bu i have tried the remedies in the posts and have not been able to solve the problem.
I had TVheadend installed on XBMC and it used to work fine.
Using a Gigabyte U8000-RH USB tuner.
The driver that it uses is the DiBcom 7000PC which is included in the kernel since 2.6.24 or thereabouts.
So i know the signal is fine because it used to work but I recently installed Kodi which includes TVheadend.
Since then i have not been able to get the tuner to work.
It appears as adapter0
TVHeadend version is 3.4.28 Kodi version is 15 on kodibuntu
lsusb output:
Bus 002 Device 002: ID 1044:7002 Chu Yuen Enterprise Co., Ltd Gigabyte U8000 DVB
ls /dev/dvb/ output
Adapter0
dmesg | grep -i dvb output:
[ 21.781167] dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware
[ 22.020338] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 22.764290] dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
[ 22.764806] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 22.764938] DVB: registering new adapter (Gigabyte U8000-RH)
[ 23.031276] usb 2-6: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 23.796334] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc1/input14
[ 23.796513] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/rc/rc1
[ 23.796651] dvb-usb: schedule remote query interval to 50 msecs.
[ 23.796661] dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
[ 23.797884] usbcore: registered new interface driver dvb_usb_dib0700


I have tried using the brisbane australia mux settings I have also tried to manually add the muxes and still no services.
I also have tried the generic australia scan that adds 100 muxes and attempts to find services but nothing found.

Does anyone have any ideas where to look next?

Thanks