Project

General

Profile

RE: Extreme lag while scanning OTA EPG, services & channe... ยป dmesg.txt

dmesg output for hauppauge quadhd atsc - bbaovanc b, 2023-10-02 01:32

 
1
[    4.468477] em28xx 5-1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc7990c4e
2
[    4.468491] em28xx 5-1:1.0: EEPROM info:
3
[    4.468497] em28xx 5-1:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
4
[    4.475898] em28xx 5-1:1.0: 	AC97 audio (5 sample rates)
5
[    4.475910] em28xx 5-1:1.0: 	500mA max power
6
[    4.475916] em28xx 5-1:1.0: 	Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
7
[    4.532805] em28xx 5-1:1.0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
8
[    4.536652] tveeprom: Hauppauge model 177100, rev A3I6, serial# 14218400
9
[    4.536663] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
10
[    4.536670] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
11
[    4.536680] tveeprom: audio processor is None (idx 0)
12
[    4.536685] tveeprom: has no radio, has IR receiver, has no IR transmitter
13
[    4.536692] em28xx 5-1:1.0: dvb set to bulk mode.
14
[    4.596926] em28xx 5-1:1.0: chip ID is em28174
15
[    5.808719] em28xx 5-1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc7990c4e
16
[    5.808734] em28xx 5-1:1.0: EEPROM info:
17
[    5.808739] em28xx 5-1:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
18
[    5.816732] em28xx 5-1:1.0: 	AC97 audio (5 sample rates)
19
[    5.816745] em28xx 5-1:1.0: 	500mA max power
20
[    5.816750] em28xx 5-1:1.0: 	Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
21
[    5.876811] em28xx 5-1:1.0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
22
[    5.881232] tveeprom: Hauppauge model 177100, rev A3I6, serial# 14218400
23
[    5.881244] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
24
[    5.881251] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
25
[    5.881262] tveeprom: audio processor is None (idx 0)
26
[    5.881268] tveeprom: has no radio, has IR receiver, has no IR transmitter
27
[    5.881277] em28xx 5-1:1.0: dvb ts2 set to bulk mode.
28
[    6.080083] em28xx 5-2:1.0: New device HCW 955D @ 480 Mbps (2040:826d, interface 0, class 0)
29
[    6.080088] em28xx 5-2:1.0: DVB interface 0 found: bulk
30
[    6.136937] em28xx 5-2:1.0: chip ID is em28174
31
[    7.344124] em28xx 5-2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc8990c4e
32
[    7.344140] em28xx 5-2:1.0: EEPROM info:
33
[    7.344145] em28xx 5-2:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
34
[    7.351384] em28xx 5-2:1.0: 	AC97 audio (5 sample rates)
35
[    7.351397] em28xx 5-2:1.0: 	500mA max power
36
[    7.351403] em28xx 5-2:1.0: 	Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
37
[    7.408796] em28xx 5-2:1.0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
38
[    7.413585] tveeprom: Hauppauge model 177100, rev A3I6, serial# 14218401
39
[    7.413600] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
40
[    7.413608] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
41
[    7.413621] tveeprom: audio processor is None (idx 0)
42
[    7.413627] tveeprom: has no radio, has IR receiver, has no IR transmitter
43
[    7.413637] em28xx 5-2:1.0: dvb set to bulk mode.
44
[    7.472928] em28xx 5-2:1.0: chip ID is em28174
45
[    8.687743] em28xx 5-2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc8990c4e
46
[    8.687764] em28xx 5-2:1.0: EEPROM info:
47
[    8.687772] em28xx 5-2:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
48
[    8.694747] em28xx 5-2:1.0: 	AC97 audio (5 sample rates)
49
[    8.694764] em28xx 5-2:1.0: 	500mA max power
50
[    8.694772] em28xx 5-2:1.0: 	Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
51
[    8.752801] em28xx 5-2:1.0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
52
[    8.757783] tveeprom: Hauppauge model 177100, rev A3I6, serial# 14218401
53
[    8.757797] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
54
[    8.757806] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
55
[    8.757818] tveeprom: audio processor is None (idx 0)
56
[    8.757825] tveeprom: has no radio, has IR receiver, has no IR transmitter
57
[    8.757835] em28xx 5-2:1.0: dvb ts2 set to bulk mode.
58
[    8.956637] usbcore: registered new interface driver em28xx
59
[    8.961094] em28xx 5-1:1.0: Binding DVB extension
60
[    8.967568] i2c i2c-25: Added multiplexed i2c bus 32
61
[    8.967572] lgdt3306a 25-0059: LG Electronics LGDT3306A successfully identified
62
[    8.971222] si2157 32-0060: Silicon Labs Si2157 successfully attached
63
[    8.971232] dvbdev: DVB: registering new adapter (5-1:1.0)
64
[    8.971236] em28xx 5-1:1.0: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
65
[    8.971240] dvbdev: dvb_create_media_entity: media entity 'LG Electronics LGDT3306A VSB/QAM Frontend' registered.
66
[    8.971499] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
67
[    8.975080] em28xx 5-1:1.0: DVB extension successfully initialized
68
[    8.975085] em28xx 5-1:1.0: Binding DVB extension
69
[    8.979084] i2c i2c-27: Added multiplexed i2c bus 33
70
[    8.979088] lgdt3306a 27-000e: LG Electronics LGDT3306A successfully identified
71
[    8.981516] si2157 33-0062: Silicon Labs Si2157 successfully attached
72
[    8.981528] dvbdev: DVB: registering new adapter (5-1:1.0)
73
[    8.981531] em28xx 5-1:1.0: DVB: registering adapter 1 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
74
[    8.981535] dvbdev: dvb_create_media_entity: media entity 'LG Electronics LGDT3306A VSB/QAM Frontend' registered.
75
[    8.981839] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
76
[    8.985551] em28xx 5-1:1.0: DVB extension successfully initialized
77
[    8.985556] em28xx 5-2:1.0: Binding DVB extension
78
[    8.989841] i2c i2c-29: Added multiplexed i2c bus 34
79
[    8.989845] lgdt3306a 29-0059: LG Electronics LGDT3306A successfully identified
80
[    8.992419] si2157 34-0060: Silicon Labs Si2157 successfully attached
81
[    8.992431] dvbdev: DVB: registering new adapter (5-2:1.0)
82
[    8.992434] em28xx 5-2:1.0: DVB: registering adapter 2 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
83
[    8.992439] dvbdev: dvb_create_media_entity: media entity 'LG Electronics LGDT3306A VSB/QAM Frontend' registered.
84
[    8.992757] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
85
[    8.996298] em28xx 5-2:1.0: DVB extension successfully initialized
86
[    8.996303] em28xx 5-2:1.0: Binding DVB extension
87
[    9.000316] i2c i2c-31: Added multiplexed i2c bus 35
88
[    9.000323] lgdt3306a 31-000e: LG Electronics LGDT3306A successfully identified
89
[    9.002859] si2157 35-0062: Silicon Labs Si2157 successfully attached
90
[    9.002871] dvbdev: DVB: registering new adapter (5-2:1.0)
91
[    9.002875] em28xx 5-2:1.0: DVB: registering adapter 3 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
92
[    9.002882] dvbdev: dvb_create_media_entity: media entity 'LG Electronics LGDT3306A VSB/QAM Frontend' registered.
93
[    9.003101] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
94
[    9.006538] em28xx 5-2:1.0: DVB extension successfully initialized
95
[    9.006542] em28xx: Registered (Em28xx dvb Extension) extension
96
[    9.012340] em28xx 5-1:1.0: Registering input extension
97
[    9.012352] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
98
[    9.016773] br0: port 1(enp4s0) entered blocking state
99
[    9.016779] br0: port 1(enp4s0) entered disabled state
100
[    9.016962] device enp4s0 entered promiscuous mode
101
[    9.019817] alx 0000:04:00.0 enp4s0: NIC Up: 1 Gbps Full
102
[    9.040825] Registered IR keymap rc-hauppauge
103
[    9.041165] rc rc0: Hauppauge WinTV-dualHD 01595 ATSC/QAM as /devices/pci0000:00/0000:00:1d.4/0000:06:00.0/usb5/5-1/5-1:1.0/rc/rc0
104
[    9.041263] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
105
[    9.041300] input: Hauppauge WinTV-dualHD 01595 ATSC/QAM as /devices/pci0000:00/0000:00:1d.4/0000:06:00.0/usb5/5-1/5-1:1.0/rc/rc0/input19
106
[    9.041369] em28xx 5-1:1.0: Input extension successfully initialized
107
[    9.041387] em28xx 5-1:1.0: Remote control support is not available for this card.
108
[    9.041390] em28xx 5-2:1.0: Registering input extension
109
[    9.041623] Registered IR keymap rc-hauppauge
110
[    9.041843] rc rc1: Hauppauge WinTV-dualHD 01595 ATSC/QAM as /devices/pci0000:00/0000:00:1d.4/0000:06:00.0/usb5/5-2/5-2:1.0/rc/rc1
111
[    9.041914] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
112
[    9.041961] input: Hauppauge WinTV-dualHD 01595 ATSC/QAM as /devices/pci0000:00/0000:00:1d.4/0000:06:00.0/usb5/5-2/5-2:1.0/rc/rc1/input20
113
[    9.042022] em28xx 5-2:1.0: Input extension successfully initialized
114
[    9.042029] em28xx 5-2:1.0: Remote control support is not available for this card.
115
[    9.042033] em28xx: Registered (Em28xx Input Extension) extension
116
[   59.737164] si2157 35-0062: found a 'Silicon Labs Si2157-A30 ROM 0x50'
117
[   59.737197] si2157 35-0062: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
118
[   59.737203] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
119
[   59.737219] si2157 35-0062: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
120
[   59.737235] si2157 35-0062: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
121
[   59.737251] si2157 35-0062: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
122
[   59.737256] si2157 35-0062: Using ROM firmware.
123
[   59.786583] si2157 35-0062: firmware version: 3.0.5
124
[   59.791781] em28xx 5-2:1.0: DVB: adapter 3 frontend 0 frequency 0 out of range (54000000..858000000)
125
[   59.841240] si2157 34-0060: found a 'Silicon Labs Si2157-A30 ROM 0x50'
126
[   59.841259] si2157 34-0060: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
127
[   59.841268] si2157 34-0060: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
128
[   59.841279] si2157 34-0060: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
129
[   59.841288] si2157 34-0060: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
130
[   59.841292] si2157 34-0060: Using ROM firmware.
131
[   59.892085] si2157 34-0060: firmware version: 3.0.5
132
[   59.897748] em28xx 5-2:1.0: DVB: adapter 2 frontend 0 frequency 0 out of range (54000000..858000000)
133
[   59.949440] si2157 33-0062: found a 'Silicon Labs Si2157-A30 ROM 0x50'
134
[   59.949458] si2157 33-0062: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
135
[   59.949468] si2157 33-0062: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
136
[   59.949478] si2157 33-0062: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
137
[   59.949487] si2157 33-0062: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
138
[   59.949491] si2157 33-0062: Using ROM firmware.
139
[   59.998853] si2157 33-0062: firmware version: 3.0.5
140
[   60.004351] em28xx 5-1:1.0: DVB: adapter 1 frontend 0 frequency 0 out of range (54000000..858000000)
141
[   60.056978] si2157 32-0060: found a 'Silicon Labs Si2157-A30 ROM 0x50'
142
[   60.056994] si2157 32-0060: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
143
[   60.057001] si2157 32-0060: firmware: failed to load dvb_driver_si2157_rom50.fw (-2)
144
[   60.057010] si2157 32-0060: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
145
[   60.057016] si2157 32-0060: firmware: failed to load dvb-tuner-si2157-a30-01.fw (-2)
146
[   60.057018] si2157 32-0060: Using ROM firmware.
147
[   60.106466] si2157 32-0060: firmware version: 3.0.5
148
[   60.111980] em28xx 5-1:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (54000000..858000000)
    (1-1/1)