Project

General

Profile

RE: End of program: Time missed - unable to stream/record ยป dmesg.txt

flex tcg, 2022-11-24 23:13

 
1
[    0.000000] Booting Linux on physical CPU 0x0
2
[    0.000000] Linux version 5.15.76-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP Fri Nov 4 12:13:17 GMT 2022
3
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
4
[    0.000000] CPU: div instructions available: patching division code
5
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
6
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
7
[    0.000000] random: crng init done
8
[    0.000000] Memory policy: Data cache writealloc
9
[    0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB
10
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
11
[    0.000000] Zone ranges:
12
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003b3fffff]
13
[    0.000000]   Normal   empty
14
[    0.000000] Movable zone start for each node
15
[    0.000000] Early memory node ranges
16
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
17
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
18
[    0.000000] percpu: Embedded 16 pages/cpu s35724 r8192 d21620 u65536
19
[    0.000000] pcpu-alloc: s35724 r8192 d21620 u65536 alloc=16*4096
20
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
21
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
22
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=e2644bd7-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
23
[    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
24
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
25
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
26
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
27
[    0.000000] Memory: 681100K/970752K available (10240K kernel code, 1337K rwdata, 3080K rodata, 1024K init, 569K bss, 27508K reserved, 262144K cma-reserved)
28
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
29
[    0.000000] ftrace: allocating 33307 entries in 98 pages
30
[    0.000000] ftrace: allocated 98 pages with 3 groups
31
[    0.000000] trace event string verifier disabled
32
[    0.000000] rcu: Hierarchical RCU implementation.
33
[    0.000000]  Rude variant of Tasks RCU enabled.
34
[    0.000000]  Tracing variant of Tasks RCU enabled.
35
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
36
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
37
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
38
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
39
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
40
[    0.000021] Switching to timer-based delay loop, resolution 52ns
41
[    0.000415] Console: colour dummy device 80x30
42
[    0.000493] printk: console [tty1] enabled
43
[    0.000550] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
44
[    0.000579] pid_max: default: 32768 minimum: 301
45
[    0.000741] LSM: Security Framework initializing
46
[    0.000972] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
47
[    0.000999] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
48
[    0.002530] cgroup: Disabling memory control group subsystem
49
[    0.002816] CPU: Testing write buffer coherency: ok
50
[    0.003350] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
51
[    0.004840] Setting up static identity map for 0x100000 - 0x10003c
52
[    0.005029] rcu: Hierarchical SRCU implementation.
53
[    0.006017] smp: Bringing up secondary CPUs ...
54
[    0.007175] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
55
[    0.008487] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
56
[    0.009696] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
57
[    0.009938] smp: Brought up 1 node, 4 CPUs
58
[    0.009963] SMP: Total of 4 processors activated (153.60 BogoMIPS).
59
[    0.009981] CPU: All CPU(s) started in HYP mode.
60
[    0.009992] CPU: Virtualization extensions available.
61
[    0.010910] devtmpfs: initialized
62
[    0.029222] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
63
[    0.029449] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
64
[    0.029485] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
65
[    0.042027] pinctrl core: initialized pinctrl subsystem
66
[    0.043393] NET: Registered PF_NETLINK/PF_ROUTE protocol family
67
[    0.048063] DMA: preallocated 1024 KiB pool for atomic coherent allocations
68
[    0.053652] audit: initializing netlink subsys (disabled)
69
[    0.053946] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1
70
[    0.054579] thermal_sys: Registered thermal governor 'step_wise'
71
[    0.055702] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
72
[    0.055723] hw-breakpoint: maximum watchpoint size is 8 bytes.
73
[    0.055990] Serial: AMBA PL011 UART driver
74
[    0.065882] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
75
[    0.090106] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:10:35, variant start
76
[    0.100122] raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
77
[    0.149460] Kprobes globally optimized
78
[    0.155010] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
79
[    0.157295] SCSI subsystem initialized
80
[    0.157566] usbcore: registered new interface driver usbfs
81
[    0.157643] usbcore: registered new interface driver hub
82
[    0.157715] usbcore: registered new device driver usb
83
[    0.158099] usb_phy_generic phy: supply vcc not found, using dummy regulator
84
[    0.158286] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
85
[    0.158558] pps_core: LinuxPPS API ver. 1 registered
86
[    0.158573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
87
[    0.158604] PTP clock support registered
88
[    0.160897] clocksource: Switched to clocksource arch_sys_counter
89
[    0.231626] VFS: Disk quotas dquot_6.6.0
90
[    0.231746] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
91
[    0.231952] FS-Cache: Loaded
92
[    0.232242] CacheFiles: Loaded
93
[    0.233074] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes
94
[    0.233098] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
95
[    0.233606] Console: switching to colour frame buffer device 90x30
96
[    0.239296] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
97
[    0.250023] NET: Registered PF_INET protocol family
98
[    0.250306] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
99
[    0.251929] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
100
[    0.251976] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
101
[    0.252008] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
102
[    0.252138] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
103
[    0.252336] TCP: Hash tables configured (established 8192 bind 8192)
104
[    0.252509] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
105
[    0.252580] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
106
[    0.252876] NET: Registered PF_UNIX/PF_LOCAL protocol family
107
[    0.261973] RPC: Registered named UNIX socket transport module.
108
[    0.261992] RPC: Registered udp transport module.
109
[    0.262005] RPC: Registered tcp transport module.
110
[    0.262017] RPC: Registered tcp NFSv4.1 backchannel transport module.
111
[    1.869305] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
112
[    1.909223] Initialise system trusted keyrings
113
[    1.909560] workingset: timestamp_bits=14 max_order=18 bucket_order=4
114
[    1.919452] zbud: loaded
115
[    1.921687] FS-Cache: Netfs 'nfs' registered for caching
116
[    1.922709] NFS: Registering the id_resolver key type
117
[    1.922772] Key type id_resolver registered
118
[    1.922787] Key type id_legacy registered
119
[    1.922940] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
120
[    1.922958] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
121
[    1.924181] Key type asymmetric registered
122
[    1.924198] Asymmetric key parser 'x509' registered
123
[    1.924301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
124
[    1.924319] io scheduler mq-deadline registered
125
[    1.924333] io scheduler kyber registered
126
[    1.937214] bcm2835-rng 3f104000.rng: hwrng registered
127
[    1.937823] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
128
[    1.939090] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
129
[    1.951360] brd: module loaded
130
[    1.961048] loop: module loaded
131
[    1.961783] Loading iSCSI transport class v2.0-870.
132
[    1.963768] usbcore: registered new interface driver lan78xx
133
[    1.963838] usbcore: registered new interface driver smsc95xx
134
[    1.963863] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
135
[    2.692086] Core Release: 2.80a
136
[    2.692108] Setting default values for core params
137
[    2.692139] Finished setting default values for core params
138
[    2.892494] Using Buffer DMA mode
139
[    2.892508] Periodic Transfer Interrupt Enhancement - disabled
140
[    2.892521] Multiprocessor Interrupt Enhancement - disabled
141
[    2.892534] OTG VER PARAM: 0, OTG VER FLAG: 0
142
[    2.892552] Dedicated Tx FIFOs mode
143

    
144
[    2.893229] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000 dma = 0xded04000 len=9024
145
[    2.893273] FIQ FSM acceleration enabled for :
146
               Non-periodic Split Transactions
147
               Periodic Split Transactions
148
               High-Speed Isochronous Endpoints
149
               Interrupt/Control Split Transaction hack enabled
150
[    2.893293] dwc_otg: Microframe scheduler enabled
151

    
152
[    2.893418] WARN::hcd_init_fiq:457: FIQ on core 1
153

    
154
[    2.893435] WARN::hcd_init_fiq:458: FIQ ASM at 807fb38c length 36
155

    
156
[    2.893457] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
157
[    2.893480] dwc_otg 3f980000.usb: DWC OTG Controller
158
[    2.893520] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
159
[    2.893570] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
160
[    2.893632] Init: Port Power? op_state=1
161
[    2.893644] Init: Power Port (0)
162
[    2.893995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
163
[    2.894019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
164
[    2.894038] usb usb1: Product: DWC OTG Controller
165
[    2.894055] usb usb1: Manufacturer: Linux 5.15.76-v7+ dwc_otg_hcd
166
[    2.894072] usb usb1: SerialNumber: 3f980000.usb
167
[    2.894842] hub 1-0:1.0: USB hub found
168
[    2.894909] hub 1-0:1.0: 1 port detected
169
[    2.895813] dwc_otg: FIQ enabled
170
[    2.895828] dwc_otg: NAK holdoff enabled
171
[    2.895840] dwc_otg: FIQ split-transaction FSM enabled
172
[    2.895858] Module dwc_common_port init
173
[    2.896208] usbcore: registered new interface driver usb-storage
174
[    2.896447] mousedev: PS/2 mouse device common for all mice
175
[    2.899900] sdhci: Secure Digital Host Controller Interface driver
176
[    2.899915] sdhci: Copyright(c) Pierre Ossman
177
[    2.900440] sdhci-pltfm: SDHCI platform and OF driver helper
178
[    2.903256] ledtrig-cpu: registered to indicate activity on CPUs
179
[    2.903605] hid: raw HID events driver (C) Jiri Kosina
180
[    2.903761] usbcore: registered new interface driver usbhid
181
[    2.903777] usbhid: USB HID core driver
182
[    2.909330] Initializing XFRM netlink socket
183
[    2.909380] NET: Registered PF_PACKET protocol family
184
[    2.909522] Key type dns_resolver registered
185
[    2.910302] Registering SWP/SWPB emulation handler
186
[    2.911274] registered taskstats version 1
187
[    2.911307] Loading compiled-in X.509 certificates
188
[    2.912132] Key type ._fscrypt registered
189
[    2.912148] Key type .fscrypt registered
190
[    2.912161] Key type fscrypt-provisioning registered
191
[    2.923736] uart-pl011 3f201000.serial: cts_event_workaround enabled
192
[    2.923901] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
193
[    2.926767] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
194
[    2.927210] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
195
[    2.928972] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
196
[    2.928994] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
197
[    2.958141] sdhost: log_buf @ ff77e4f4 (ded07000)
198
[    3.008942] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
199
[    3.021100] Indeed it is in host mode hprt0 = 00021501
200
[    3.033458] of_cfs_init
201
[    3.033771] of_cfs_init: OK
202
[    3.036335] Waiting for root device PARTUUID=e2644bd7-02...
203
[    3.099690] mmc0: host does not support reading read-only switch, assuming write-enable
204
[    3.103783] mmc0: new high speed SDHC card at address aaaa
205
[    3.104964] mmcblk0: mmc0:aaaa SB16G 14.8 GiB
206
[    3.110373]  mmcblk0: p1 p2
207
[    3.111400] mmcblk0: mmc0:aaaa SB16G 14.8 GiB (quirks 0x00004000)
208
[    3.119441] mmc1: new high speed SDIO card at address 0001
209
[    3.137358] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
210
[    3.137461] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
211
[    3.138454] devtmpfs: mounted
212
[    3.146647] Freeing unused kernel image (initmem) memory: 1024K
213
[    3.181431] Run /sbin/init as init process
214
[    3.181446]   with arguments:
215
[    3.181457]     /sbin/init
216
[    3.181468]     splash
217
[    3.181479]   with environment:
218
[    3.181490]     HOME=/
219
[    3.181501]     TERM=linux
220
[    3.230952] usb 1-1: new high-speed USB device number 2 using dwc_otg
221
[    3.231132] Indeed it is in host mode hprt0 = 00001101
222
[    3.471324] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
223
[    3.471364] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
224
[    3.472164] hub 1-1:1.0: USB hub found
225
[    3.472311] hub 1-1:1.0: 5 ports detected
226
[    3.706861] systemd[1]: System time before build time, advancing clock.
227
[    3.800949] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
228
[    3.931407] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
229
[    3.931450] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
230
[    3.934421] smsc95xx v2.0.0
231
[    3.960488] NET: Registered PF_INET6 protocol family
232
[    3.962359] Segment Routing with IPv6
233
[    3.962411] In-situ OAM (IOAM) with IPv6
234
[    4.079624] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
235
[    4.080767] systemd[1]: Detected architecture arm.
236
[    4.083394] systemd[1]: Set hostname to <raspberrypi>.
237
[    4.134259] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
238
[    4.135457] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5a:26:f8
239
[    4.231126] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
240
[    4.365394] usb 1-1.2: New USB device found, idVendor=07ca, idProduct=1871, bcdDevice= 1.00
241
[    4.365438] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
242
[    4.365458] usb 1-1.2: Product: TD310 Device
243
[    4.365475] usb 1-1.2: Manufacturer: AVerMedia
244
[    4.365491] usb 1-1.2: SerialNumber: 201921000087
245
[    4.460960] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
246
[    4.601157] usb 1-1.3: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
247
[    4.601200] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
248
[    4.601220] usb 1-1.3: Product: dvbt2
249
[    4.601236] usb 1-1.3: Manufacturer: astrometadvbt2
250
[    5.119803] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
251
[    5.420609] systemd[1]: Queued start job for default target Graphical Interface.
252
[    5.431482] systemd[1]: Created slice system-getty.slice.
253
[    5.433115] systemd[1]: Created slice system-modprobe.slice.
254
[    5.434310] systemd[1]: Created slice system-systemd\x2dfsck.slice.
255
[    5.435213] systemd[1]: Created slice User and Session Slice.
256
[    5.435851] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
257
[    5.437176] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
258
[    5.438594] systemd[1]: Reached target Slices.
259
[    5.438903] systemd[1]: Reached target Swap.
260
[    5.440255] systemd[1]: Listening on Syslog Socket.
261
[    5.441203] systemd[1]: Listening on fsck to fsckd communication Socket.
262
[    5.441700] systemd[1]: Listening on initctl Compatibility Named Pipe.
263
[    5.443131] systemd[1]: Listening on Journal Audit Socket.
264
[    5.443981] systemd[1]: Listening on Journal Socket (/dev/log).
265
[    5.445018] systemd[1]: Listening on Journal Socket.
266
[    5.453249] systemd[1]: Listening on udev Control Socket.
267
[    5.454202] systemd[1]: Listening on udev Kernel Socket.
268
[    5.455518] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
269
[    5.461120] systemd[1]: Mounting POSIX Message Queue File System...
270
[    5.467211] systemd[1]: Mounting RPC Pipe File System...
271
[    5.474033] systemd[1]: Mounting Kernel Debug File System...
272
[    5.480710] systemd[1]: Mounting Kernel Trace File System...
273
[    5.481890] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
274
[    5.492881] systemd[1]: Starting Restore / save the current clock...
275
[    5.500209] systemd[1]: Starting Set the console keyboard layout...
276
[    5.507677] systemd[1]: Starting Create list of static device nodes for the current kernel...
277
[    5.515315] systemd[1]: Starting Load Kernel Module configfs...
278
[    5.522583] systemd[1]: Starting Load Kernel Module drm...
279
[    5.530752] systemd[1]: Starting Load Kernel Module fuse...
280
[    5.539915] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
281
[    5.561240] systemd[1]: Starting File System Check on Root Device...
282
[    5.584970] systemd[1]: Starting Journal Service...
283
[    5.619839] systemd[1]: Starting Load Kernel Modules...
284
[    5.641983] systemd[1]: Starting Coldplug All udev Devices...
285
[    5.659568] systemd[1]: Mounted POSIX Message Queue File System.
286
[    5.660466] systemd[1]: Mounted RPC Pipe File System.
287
[    5.672045] systemd[1]: Mounted Kernel Debug File System.
288
[    5.672934] systemd[1]: Mounted Kernel Trace File System.
289
[    5.691733] systemd[1]: Finished Restore / save the current clock.
290
[    5.702816] systemd[1]: Finished Create list of static device nodes for the current kernel.
291
[    5.705672] systemd[1]: [email protected]: Succeeded.
292
[    5.706489] fuse: init (API version 7.34)
293
[    5.707313] systemd[1]: Finished Load Kernel Module configfs.
294
[    5.721733] systemd[1]: Mounting Kernel Configuration File System...
295
[    5.728810] systemd[1]: Started File System Check Daemon to report status.
296
[    5.733348] systemd[1]: [email protected]: Succeeded.
297
[    5.735014] systemd[1]: Finished Load Kernel Module fuse.
298
[    5.743050] systemd[1]: Mounting FUSE Control File System...
299
[    5.747799] i2c_dev: i2c /dev entries driver
300
[    5.752046] systemd[1]: Mounted Kernel Configuration File System.
301
[    5.758874] systemd[1]: Finished Load Kernel Modules.
302
[    5.776755] systemd[1]: Starting Apply Kernel Variables...
303
[    5.795114] systemd[1]: Mounted FUSE Control File System.
304
[    5.892505] systemd[1]: [email protected]: Succeeded.
305
[    5.895366] systemd[1]: Finished Load Kernel Module drm.
306
[    5.920622] systemd[1]: Finished Apply Kernel Variables.
307
[    5.992250] systemd[1]: Finished File System Check on Root Device.
308
[    5.998047] systemd[1]: Starting Remount Root and Kernel File Systems...
309
[    6.017062] systemd[1]: Started Journal Service.
310
[    6.177504] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
311
[    6.272174] systemd-journald[129]: Received client request to flush runtime journal.
312
[    6.300975] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
313
[    6.308696] systemd-journald[129]: File /var/log/journal/8fb15cd9758f4525893fed3e851a2041/system.journal corrupted or uncleanly shut down, renaming and replacing.
314
[    6.434981] usb 1-1.4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 2.00
315
[    6.435025] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
316
[    6.435046] usb 1-1.4: Product: DataTraveler 3.0
317
[    6.435063] usb 1-1.4: Manufacturer: Kingston
318
[    6.435079] usb 1-1.4: SerialNumber: E0D55E625BFC1681088905EF
319
[    6.435988] usb-storage 1-1.4:1.0: USB Mass Storage device detected
320
[    6.437846] scsi host0: usb-storage 1-1.4:1.0
321
[    7.512594] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 3.0 0000 PQ: 0 ANSI: 4
322
[    7.515204] sd 0:0:0:0: [sda] 242155521 512-byte logical blocks: (124 GB/115 GiB)
323
[    7.517509] sd 0:0:0:0: [sda] Write Protect is off
324
[    7.517554] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
325
[    7.517893] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
326
[    7.524172]  sda: sda1
327
[    7.526414] sd 0:0:0:0: [sda] Attached SCSI removable disk
328
[    8.080718] mc: Linux media interface: v0.10
329
[    8.089530] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
330
[    8.122363] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
331
[    8.122400] [vc_sm_connected_init]: start
332
[    8.151432] [vc_sm_connected_init]: installed successfully
333
[    8.453984] videodev: Linux video capture interface: v2.00
334
[    8.569651] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
335
[    8.603161] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
336
[    8.607735] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
337
[    8.639281] bcm2835_audio bcm2835_audio: card created with 8 channels
338
[    8.650561] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
339
[    8.684467] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
340
[    8.706770] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
341
[    8.707362] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
342
[    8.707832] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
343
[    8.708258] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
344
[    8.708292] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
345
[    8.708319] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
346
[    8.708341] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
347
[    8.708363] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
348
[    8.713850] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
349
[    8.714347] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
350
[    8.715953] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
351
[    8.716697] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
352
[    8.716735] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
353
[    8.716762] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
354
[    8.716785] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
355
[    8.716807] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
356
[    8.717025] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
357
[    8.744814] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
358
[    8.767426] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
359
[    8.767489] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
360
[    8.770656] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
361
[    8.770718] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
362
[    8.785198] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
363
[    8.785269] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
364
[    8.796715] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
365
[    8.796803] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
366
[    8.804763] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
367
[    8.804839] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
368
[    9.437555] usb 1-1.3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
369
[    9.452790] dvb_usb_af9035 1-1.2:1.0: prechip_version=83 chip_version=01 chip_type=9306
370
[    9.453182] usb 1-1.2: dvb_usb_v2: found a 'AVerMedia TD310 DVB-T2' in cold state
371
[    9.458388] cfg80211: Loading compiled-in X.509 certificates for regulatory database
372
[    9.488507] usb 1-1.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9303-01.fw'
373
[    9.535752] dvb_usb_af9035 1-1.2:1.0: firmware version=1.4.0.0
374
[    9.535827] usb 1-1.2: dvb_usb_v2: found a 'AVerMedia TD310 DVB-T2' in warm state
375
[    9.536872] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
376
[    9.537943] dvbdev: DVB: registering new adapter (AVerMedia TD310 DVB-T2)
377
[    9.537970] usb 1-1.2: media controller created
378
[    9.550722] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
379
[    9.614514] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
380
[    9.638126] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
381
[    9.638205] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
382
[    9.638227] usb 1-1.3: media controller created
383
[    9.641669] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
384
[    9.646468] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
385
[    9.706554] i2c i2c-12: Added multiplexed i2c bus 13
386
[    9.706592] rtl2832 12-0010: Realtek RTL2832 successfully attached
387
[    9.741025] mn88473 12-0018: Panasonic MN88473 successfully identified
388
[    9.741258] usb 1-1.3: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
389
[    9.741305] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
390
[    9.741620] usb 1-1.3: DVB: registering adapter 1 frontend 1 (Panasonic MN88473)...
391
[    9.741653] dvbdev: dvb_create_media_entity: media entity 'Panasonic MN88473' registered.
392
[    9.818910] r820t 13-003a: creating new instance
393
[    9.826114] r820t 13-003a: Rafael Micro r820t successfully identified
394
[    9.826177] r820t 13-003a: attaching existing instance
395
[    9.831281] r820t 13-003a: Rafael Micro r820t successfully identified
396
[    9.872810] i2c i2c-11: Added multiplexed i2c bus 14
397
[    9.872849] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified
398
[    9.872869] si2168 11-0064: firmware version: B 4.0.2
399
[    9.873012] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
400
[    9.873060] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
401
[    9.904724] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
402
[    9.904762] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
403
[    9.904781] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
404
[    9.906676] si2157 14-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
405
[    9.915454] Registered IR keymap rc-astrometa-t2hybrid
406
[    9.953073] IR NEC protocol handler initialized
407
[    9.955319] usb 1-1.2: dvb_usb_v2: 'AVerMedia TD310 DVB-T2' successfully initialized and connected
408
[    9.955609] usbcore: registered new interface driver dvb_usb_af9035
409
[    9.957864] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
410
[    9.974432] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
411
[    9.975133] usbcore: registered new interface driver brcmfmac
412
[    9.991200] rc rc0: Astrometa DVB-T2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
413
[    9.994386] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
414
[    9.994680] input: Astrometa DVB-T2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
415
[    9.995104] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs
416
[   10.006560] usb 1-1.3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
417
[   10.010320] usbcore: registered new interface driver dvb_usb_rtl28xxu
418
[   10.093259] checking generic (3eaa9000 151800) vs hw (0 ffffffff)
419
[   10.093294] fb0: switching to vc4 from simple
420
[   10.104080] Console: switching to colour dummy device 80x30
421
[   10.109801] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
422
[   10.119800] Registered IR keymap rc-cec
423
[   10.120050] rc rc1: vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc1
424
[   10.120346] input: vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc1/input1
425
[   10.220101] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
426
[   10.220759] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
427
[   10.221414] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
428
[   10.221913] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
429
[   10.222111] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
430
[   10.222406] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
431
[   10.222818] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
432
[   10.232990] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
433
[   10.233839] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
434
[   10.234270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
435
[   10.533987] usbcore: registered new interface driver uas
436
[   10.971412] sd 0:0:0:0: Attached scsi generic sg0 type 0
437
[   11.501561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
438
[   12.701232] 8021q: 802.1Q VLAN Support v1.8
439
[   12.766219] uart-pl011 3f201000.serial: no DMA platform data
440
[   12.934286] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
441
[   13.465304] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
442
[   14.103221] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
443
[   14.252029] smsc95xx 1-1.1:1.0 eth0: Link is Down
444
[   16.471773] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
445
[   16.471842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
446
[   19.329805] Bluetooth: Core ver 2.22
447
[   19.329967] NET: Registered PF_BLUETOOTH protocol family
448
[   19.329976] Bluetooth: HCI device and connection manager initialized
449
[   19.330948] Bluetooth: HCI socket layer initialized
450
[   19.330971] Bluetooth: L2CAP socket layer initialized
451
[   19.331001] Bluetooth: SCO socket layer initialized
452
[   19.355072] Bluetooth: HCI UART driver ver 2.3
453
[   19.355098] Bluetooth: HCI UART protocol H4 registered
454
[   19.355184] Bluetooth: HCI UART protocol Three-wire (H5) registered
455
[   19.356147] Bluetooth: HCI UART protocol Broadcom registered
456
[   19.708213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
457
[   19.708235] Bluetooth: BNEP filters: protocol multicast
458
[   19.708254] Bluetooth: BNEP socket layer initialized
459
[   19.732478] NET: Registered PF_ALG protocol family
460
[   19.761971] cryptd: max_cpu_qlen set to 1000
461
[   20.311768] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
462
[   21.210756] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
463
[   21.210796]  MAI: soc_pcm_open() failed (-19)
464
[   21.212754] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
465
[   21.212859]  MAI: soc_pcm_open() failed (-19)
466
[   21.214477] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
467
[   21.214523]  MAI: soc_pcm_open() failed (-19)
468
[   21.238963] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
469
[   21.239006]  MAI: soc_pcm_open() failed (-19)
470
[   21.239820] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
471
[   21.239860]  MAI: soc_pcm_open() failed (-19)
472
[   21.240824] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
473
[   21.240871]  MAI: soc_pcm_open() failed (-19)
474
[   21.364383] Bluetooth: RFCOMM TTY layer initialized
475
[   21.364431] Bluetooth: RFCOMM socket layer initialized
476
[   21.364462] Bluetooth: RFCOMM ver 1.11
477
[   21.532129] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
478
[   22.014202] usb 1-1.3: DVB: adapter 1 frontend 0 frequency 0 out of range (174000000..862000000)
479
[   22.589068] mn88473 12-0018: downloading firmware from file 'dvb-demod-mn88473-01.fw'
480
[   23.231486] usb 1-1.3: DVB: adapter 1 frontend 1 frequency 0 out of range (42000000..1002000000)
481
[   23.404363] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
482
[   23.979431] si2168 11-0064: firmware version: B 4.0.11
483
[   23.991791] si2157 14-0060: found a 'Silicon Labs Si2147-A30'
484
[   24.044409] si2157 14-0060: firmware version: 3.0.5
485
[   24.054787] usb 1-1.2: DVB: adapter 0 frontend 0 frequency 0 out of range (48000000..870000000)
486
[   33.110977] cam-dummy-reg: disabling
    (1-1/1)