Project

General

Profile

RE: DVB-T2 ZDF Mux in Leipzig/Germany at 482MHz not working » dmesg_out.txt

Tobias Weiß, 2021-06-04 15:59

 
1
[    0.000000] Booting Linux on physical CPU 0x0
2
[    0.000000] Linux version 4.19.127 (chewitt@toolbox) (gcc version 8.3.0 (GCC)) #1 SMP Sun May 23 10:38:58 UTC 2021
3
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
4
[    0.000000] CPU: div instructions available: patching division code
5
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
6
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
7
[    0.000000] Memory policy: Data cache writealloc
8
[    0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
9
[    0.000000] On node 0 totalpages: 950272
10
[    0.000000]   DMA zone: 1584 pages used for memmap
11
[    0.000000]   DMA zone: 0 pages reserved
12
[    0.000000]   DMA zone: 180224 pages, LIFO batch:63
13
[    0.000000]   HighMem zone: 770048 pages, LIFO batch:63
14
[    0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d8 with crng_init=0
15
[    0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
16
[    0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
17
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
18
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 948688
19
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:15:91:BA vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  boot=UUID=2705-4133 disk=UUID=f676849c-14fd-415d-9a0a-2d51e19df98b quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
20
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
21
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
22
[    0.000000] Memory: 3481980K/3801088K available (10240K kernel code, 760K rwdata, 2256K rodata, 6144K init, 559K bss, 56964K reserved, 262144K cma-reserved, 3080192K highmem)
23
[    0.000000] Virtual kernel memory layout:
24
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
25
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
26
[    0.000000]     vmalloc : 0xec800000 - 0xff800000   ( 304 MB)
27
[    0.000000]     lowmem  : 0xc0000000 - 0xec000000   ( 704 MB)
28
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
29
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
30
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
31
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (6144 kB)
32
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 761 kB)
33
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 560 kB)
34
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
35
[    0.000000] ftrace: allocating 32912 entries in 97 pages
36
[    0.000000] rcu: Hierarchical RCU implementation.
37
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
38
[    0.000000] GIC: Using split EOI/Deactivate mode
39
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
40
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
41
[    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
42
[    0.000017] Switching to timer-based delay loop, resolution 18ns
43
[    0.000267] Console: colour dummy device 80x30
44
[    0.000299] console [tty0] enabled
45
[    0.000352] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
46
[    0.000374] pid_max: default: 32768 minimum: 301
47
[    0.000573] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
48
[    0.000597] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
49
[    0.001377] CPU: Testing write buffer coherency: ok
50
[    0.001882] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
51
[    0.002717] Setting up static identity map for 0x200000 - 0x20003c
52
[    0.002923] rcu: Hierarchical SRCU implementation.
53
[    0.005636] smp: Bringing up secondary CPUs ...
54
[    0.006748] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
55
[    0.007976] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
56
[    0.009143] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
57
[    0.009290] smp: Brought up 1 node, 4 CPUs
58
[    0.009308] SMP: Total of 4 processors activated (432.00 BogoMIPS).
59
[    0.009320] CPU: All CPU(s) started in HYP mode.
60
[    0.009332] CPU: Virtualization extensions available.
61
[    0.010176] devtmpfs: initialized
62
[    0.021454] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
63
[    0.021697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
64
[    0.021724] futex hash table entries: 1024 (order: 4, 65536 bytes)
65
[    0.028117] pinctrl core: initialized pinctrl subsystem
66
[    0.029179] NET: Registered protocol family 16
67
[    0.033302] DMA: preallocated 1024 KiB pool for atomic coherent allocations
68
[    0.034406] cpuidle: using governor ladder
69
[    0.034455] cpuidle: using governor menu
70
[    0.034976] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
71
[    0.034990] hw-breakpoint: maximum watchpoint size is 8 bytes.
72
[    0.035223] Serial: AMBA PL011 UART driver
73
[    0.039889] bcm2835-mbox fe00b880.mailbox: mailbox enabled
74
[    0.050217] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-26 14:49, variant start_x
75
[    0.053563] raspberrypi-firmware soc:firmware: Firmware hash is b078012603a6a094178f959805996ad225a0d83b
76
[    0.096442] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
77
[    0.101182] vgaarb: loaded
78
[    0.101511] SCSI subsystem initialized
79
[    0.101724] usbcore: registered new interface driver usbfs
80
[    0.101782] usbcore: registered new interface driver hub
81
[    0.101899] usbcore: registered new device driver usb
82
[    0.102459] Advanced Linux Sound Architecture Driver Initialized.
83
[    0.103543] clocksource: Switched to clocksource arch_sys_counter
84
[    0.192710] FS-Cache: Loaded
85
[    0.203319] NET: Registered protocol family 2
86
[    0.204072] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
87
[    0.204101] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
88
[    0.204164] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
89
[    0.204241] TCP: Hash tables configured (established 8192 bind 8192)
90
[    0.204391] UDP hash table entries: 512 (order: 2, 16384 bytes)
91
[    0.204427] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
92
[    0.204666] NET: Registered protocol family 1
93
[    0.205349] RPC: Registered named UNIX socket transport module.
94
[    0.205362] RPC: Registered udp transport module.
95
[    0.205375] RPC: Registered tcp transport module.
96
[    0.205387] RPC: Registered tcp NFSv4.1 backchannel transport module.
97
[    0.205408] PCI: CLS 0 bytes, default 64
98
[    0.229887] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
99
[    0.232514] Initialise system trusted keyrings
100
[    0.232731] workingset: timestamp_bits=14 max_order=20 bucket_order=6
101
[    0.242128] squashfs: version 4.0 (2009/01/31) Phillip Lougher
102
[    0.242854] FS-Cache: Netfs 'nfs' registered for caching
103
[    0.243404] NFS: Registering the id_resolver key type
104
[    0.243457] Key type id_resolver registered
105
[    0.243471] Key type id_legacy registered
106
[    0.243495] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
107
[    0.243977] FS-Cache: Netfs 'cifs' registered for caching
108
[    0.251426] Key type asymmetric registered
109
[    0.251441] Asymmetric key parser 'x509' registered
110
[    0.251631] bounce: pool size: 64 pages
111
[    0.251676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
112
[    0.251691] io scheduler noop registered (default)
113
[    0.251705] io scheduler deadline registered
114
[    0.251879] io scheduler cfq registered
115
[    0.251894] io scheduler mq-deadline registered
116
[    0.251908] io scheduler kyber registered
117
[    0.252051] io scheduler bfq registered
118
[    0.287592] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
119
[    0.287621] brcm-pcie fd500000.pcie: could not get clock
120
[    0.287713] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
121
[    0.287769] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
122
[    0.363597] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
123
[    0.363881] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
124
[    0.363901] pci_bus 0000:00: root bus resource [bus 00-01]
125
[    0.363920] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
126
[    0.363994] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
127
[    0.364231] pci 0000:00:00.0: PME# supported from D0 D3hot
128
[    0.367068] PCI: bus0: Fast back to back transfers disabled
129
[    0.367299] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
130
[    0.367446] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
131
[    0.367869] pci 0000:01:00.0: PME# supported from D0 D3hot
132
[    0.370664] PCI: bus1: Fast back to back transfers disabled
133
[    0.370750] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
134
[    0.370774] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
135
[    0.370856] pci 0000:00:00.0: PCI bridge to [bus 01]
136
[    0.370881] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
137
[    0.371178] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
138
[    0.371415] pcieport 0000:00:00.0: Signaling PME with IRQ 52
139
[    0.371625] pcieport 0000:00:00.0: AER enabled with IRQ 52
140
[    0.371853] pci 0000:01:00.0: enabling device (0140 -> 0142)
141
[    0.422765] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x87c took 49736 usecs
142
[    0.428294] iproc-rng200 fe104000.rng: hwrng registered
143
[    0.428593] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
144
[    0.429169] vc-sm: Videocore shared memory driver
145
[    0.436038] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5fa58)
146
[    0.436608] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
147
[    0.436623] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
148
[    0.436634] [drm] No driver support for vblank timestamp query.
149
[    0.436647] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
150
[    0.611382] Console: switching to colour frame buffer device 240x67
151
[    0.644700] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
152
[    0.656927] brd: module loaded
153
[    0.657047] loop: module loaded
154
[    0.678876] usbcore: registered new interface driver rtsx_usb
155
[    0.679965] Loading iSCSI transport class v2.0-870.
156
[    0.680533] iscsi: registered transport (tcp)
157
[    0.682246] libphy: Fixed MDIO Bus: probed
158
[    0.682286] tun: Universal TUN/TAP device driver, 1.6
159
[    0.683045] bcmgenet fd580000.genet: failed to get enet clock
160
[    0.683064] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
161
[    0.683087] bcmgenet fd580000.genet: failed to get enet-wol clock
162
[    0.683108] bcmgenet fd580000.genet: failed to get enet-eee clock
163
[    0.683136] bcmgenet: Skipping UMAC reset
164
[    0.683605] unimac-mdio unimac-mdio.-19: DMA mask not set
165
[    0.696925] libphy: bcmgenet MII bus: probed
166
[    0.724447] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
167
[    0.725459] usbcore: registered new interface driver lan78xx
168
[    0.725514] usbcore: registered new interface driver dm9601
169
[    0.725587] usbcore: registered new interface driver smsc95xx
170
[    0.725993] xhci_hcd 0000:01:00.0: xHCI Host Controller
171
[    0.726026] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
172
[    0.728746] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
173
[    0.729077] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 53
174
[    0.730074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
175
[    0.730092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
176
[    0.730108] usb usb1: Product: xHCI Host Controller
177
[    0.730123] usb usb1: Manufacturer: Linux 4.19.127 xhci-hcd
178
[    0.730137] usb usb1: SerialNumber: 0000:01:00.0
179
[    0.730755] hub 1-0:1.0: USB hub found
180
[    0.730849] hub 1-0:1.0: 1 port detected
181
[    0.731420] xhci_hcd 0000:01:00.0: xHCI Host Controller
182
[    0.731447] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
183
[    0.731471] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
184
[    0.731916] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
185
[    0.731933] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
186
[    0.731949] usb usb2: Product: xHCI Host Controller
187
[    0.731964] usb usb2: Manufacturer: Linux 4.19.127 xhci-hcd
188
[    0.731978] usb usb2: SerialNumber: 0000:01:00.0
189
[    0.732520] hub 2-0:1.0: USB hub found
190
[    0.732587] hub 2-0:1.0: 4 ports detected
191
[    0.734021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
192
[    0.734319] dwc_otg: FIQ enabled
193
[    0.734332] dwc_otg: NAK holdoff enabled
194
[    0.734344] dwc_otg: FIQ split-transaction FSM enabled
195
[    0.734361] Module dwc_common_port init
196
[    0.734813] usbcore: registered new interface driver uas
197
[    0.734922] usbcore: registered new interface driver usb-storage
198
[    0.735110] mousedev: PS/2 mouse device common for all mice
199
[    0.735481] i2c /dev entries driver
200
[    0.738173] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
201
[    0.740552] sdhci: Secure Digital Host Controller Interface driver
202
[    0.740565] sdhci: Copyright(c) Pierre Ossman
203
[    0.741113] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
204
[    0.741717] sdhci-pltfm: SDHCI platform and OF driver helper
205
[    0.744892] ledtrig-cpu: registered to indicate activity on CPUs
206
[    0.744958] hidraw: raw HID events driver (C) Jiri Kosina
207
[    0.746174] usbcore: registered new interface driver usbhid
208
[    0.746179] usbhid: USB HID core driver
209
[    0.746610] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
210
[    0.747699] [vc_sm_connected_init]: start
211
[    0.753843] [vc_sm_connected_init]: end - returning 0
212
[    0.754461] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
213
[    0.754469] [vc_sm_connected_init]: start
214
[    0.754635] [vc_sm_connected_init]: installed successfully
215
[    0.755686] NET: Registered protocol family 10
216
[    0.756429] Segment Routing with IPv6
217
[    0.756479] NET: Registered protocol family 17
218
[    0.756539] Key type dns_resolver registered
219
[    0.756737] Registering SWP/SWPB emulation handler
220
[    0.757170] Loading compiled-in X.509 certificates
221
[    0.762459] uart-pl011 fe201000.serial: cts_event_workaround enabled
222
[    0.762510] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
223
[    0.768867] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
224
[    0.769216] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
225
[    0.769626] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
226
[    0.769633] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
227
[    0.793766] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
228
[    0.793868] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
229
[    0.811510] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
230
[    0.813154] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
231
[    0.814835] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
232
[    0.817779] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
233
[    0.819418] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
234
[    0.827027] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
235
[    0.833277] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
236
[    0.840585] console [netcon0] enabled
237
[    0.840594] netconsole: network logging started
238
[    0.840602] of_cfs_init
239
[    0.840620] of_cfs_init: OK
240
[    0.840842] ALSA device list:
241
[    0.840850]   No soundcards found.
242
[    0.851143] Freeing unused kernel memory: 6144K
243
[    0.851618] Run /init as init process
244
[    0.866790] random: fast init done
245
[    0.900233] mmc1: new high speed SDIO card at address 0001
246
[    0.908721] Checking disk(s):  UUID=2705-4133 UUID=f676849c-14fd-415d-9a0a-2d51e19df98b
247
[    0.942382] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
248
[    0.943167] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
249
[    0.945451]  mmcblk0: p1 p2
250
[    1.063566] usb 1-1: new high-speed USB device number 2 using xhci_hcd
251
[    1.206201] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
252
[    1.206218] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
253
[    1.206234] usb 1-1: Product: USB2.0 Hub
254
[    1.208138] hub 1-1:1.0: USB hub found
255
[    1.208446] hub 1-1:1.0: 4 ports detected
256
[    1.327299] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
257
[    1.348210] usb 2-1: New USB device found, idVendor=0480, idProduct=a202, bcdDevice= 3.15
258
[    1.348228] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
259
[    1.348243] usb 2-1: Product: External USB 3.0
260
[    1.348258] usb 2-1: Manufacturer: TOSHIBA
261
[    1.348272] usb 2-1: SerialNumber: 20161006007049C
262
[    1.351871] usb-storage 2-1:1.0: USB Mass Storage device detected
263
[    1.352505] scsi host0: usb-storage 2-1:1.0
264
[    1.493664] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd
265
[    1.591328] usb 1-1.2: New USB device found, idVendor=0e8f, idProduct=0022, bcdDevice= 2.10
266
[    1.591336] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
267
[    1.591343] usb 1-1.2: Product: USB KB V11
268
[    1.591349] usb 1-1.2: Manufacturer: GASIA
269
[    1.600063] input: GASIA USB KB V11 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0E8F:0022.0001/input/input0
270
[    1.653950] hid-generic 0003:0E8F:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:01:00.0-1.2/input0
271
[    1.661565] input: GASIA USB KB V11 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0E8F:0022.0002/input/input1
272
[    1.714986] fsck: CP437: Invalid argument
273
[    1.715128] fsck: fsck.fat 4.1 (2017-01-24)
274
[    1.715338] fsck: /dev/mmcblk0p1: 220 files, 18491/65501 clusters
275
[    1.715588] fsck: STORAGE: clean, 7596/3758080 files, 1035338/15029760 blocks
276
[    1.717060] input: GASIA USB KB V11 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0E8F:0022.0002/input/input2
277
[    1.717218] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:01:00.0-1.2/input1
278
[    1.793559] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
279
[    1.883925] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
280
[    1.883934] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
281
[    1.883941] usb 1-1.4: Product: USB 2.0 Hub
282
[    1.885117] hub 1-1.4:1.0: USB hub found
283
[    1.885232] hub 1-1.4:1.0: 4 ports detected
284
[    2.029394] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
285
[    2.263593] usb 1-1.4.1: new high-speed USB device number 5 using xhci_hcd
286
[    2.339044] systemd[1]: System time before build time, advancing clock.
287
[    2.345504] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
288
[    2.345824] systemd[1]: Detected architecture arm.
289
[    2.349008] systemd[1]: Set hostname to <LibreELEC>.
290
[    2.353226] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
291
[    2.376825] scsi 0:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
292
[    2.378752] sd 0:0:0:0: [sda] 976773164 512-byte logical blocks: (500 GB/466 GiB)
293
[    2.379120] sd 0:0:0:0: [sda] Write Protect is off
294
[    2.379127] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
295
[    2.379487] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
296
[    2.454220] usb 1-1.4.1: New USB device found, idVendor=2040, idProduct=0264, bcdDevice= 1.00
297
[    2.454229] usb 1-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
298
[    2.454236] usb 1-1.4.1: Product: soloHD
299
[    2.454242] usb 1-1.4.1: Manufacturer: HCW
300
[    2.454248] usb 1-1.4.1: SerialNumber: 0013856788
301
[    2.477929] random: systemd: uninitialized urandom read (16 bytes read)
302
[    2.478108] systemd[1]: Listening on initctl Compatibility Named Pipe.
303
[    2.478326] random: systemd: uninitialized urandom read (16 bytes read)
304
[    2.478464] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
305
[    2.478512] random: systemd: uninitialized urandom read (16 bytes read)
306
[    2.478739] systemd[1]: Listening on udev Kernel Socket.
307
[    2.478901] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
308
[    2.479209] systemd[1]: Listening on Journal Socket (/dev/log).
309
[    2.482941] systemd[1]: Starting Show Version...
310
[    2.608884] kernel-overlays-setup: setup base modules
311
[    2.626891] usb 1-1.4.2: new high-speed USB device number 6 using xhci_hcd
312
[    2.660330] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
313
[    2.666425]  sda: sda1
314
[    2.669062] sd 0:0:0:0: [sda] Attached SCSI disk
315
[    2.693033] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
316
[    2.693165] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
317
[    2.703594] kernel-overlays-setup: added firmware from /storage/.config/firmware
318
[    2.703658] kernel-overlays-setup: done
319
[    2.809687] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
320
[    2.809694] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
321
[    2.832914] usb 1-1.4.2: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00
322
[    2.832925] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
323
[    2.832932] usb 1-1.4.2: Product: Portable Super Multi Drive
324
[    2.832938] usb 1-1.4.2: Manufacturer: Hitachi-LG Data Storage Inc
325
[    2.832945] usb 1-1.4.2: SerialNumber: KZQGBHM4125         
326
[    2.845585] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected
327
[    2.845850] scsi host1: usb-storage 1-1.4.2:1.0
328
[    2.892303] systemd-journald[221]: Received request to flush runtime journal from PID 1
329
[    3.277344] random: crng init done
330
[    3.277353] random: 7 urandom warning(s) missed due to ratelimiting
331
[    3.871086] scsi 1:0:0:0: CD-ROM            ASUS     SDRW-08D2S-U     A801 PQ: 0 ANSI: 0
332
[    3.878651] sr 1:0:0:0: Power-on or device reset occurred
333
[    3.892831] sr 1:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda tray
334
[    3.892839] cdrom: Uniform CD-ROM driver Revision: 3.20
335
[    3.893113] sr 1:0:0:0: Attached scsi CD-ROM sr0
336
[    3.943209] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
337
[    4.080950] cfg80211: Loading compiled-in X.509 certificates for regulatory database
338
[    4.107479] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
339
[    4.187892] brcmfmac: F1 signature read @0x18000000=0x15264345
340
[    4.198177] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
341
[    4.202610] usbcore: registered new interface driver brcmfmac
342
[    4.241519] bcmgenet: Skipping UMAC reset
343
[    4.307522] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
344
[    4.308007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
345
[    4.454179] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
346
[    4.464163] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
347
[    4.602408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
348
[    4.602426] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
349
[    4.656955] uart-pl011 fe201000.serial: no DMA platform data
350
[    4.682834] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
351
[    4.728466] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
352
[    4.728776] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
353
[    4.729833] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
354
[    4.730693] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
355
[    4.744330] media: Linux media interface: v0.10
356
[    4.783893] videodev: Linux video capture interface: v2.00
357
[    4.859680] em28xx 1-1.4.1:1.0: New device HCW soloHD @ 480 Mbps (2040:0264, interface 0, class 0)
358
[    4.859690] em28xx 1-1.4.1:1.0: DVB interface 0 found: isoc
359
[    4.863256] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
360
[    4.868675] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
361
[    4.872388] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
362
[    4.872409] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
363
[    4.876019] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
364
[    4.876036] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
365
[    4.878679] : bcm2835_codec_get_supported_fmts: port has more encoding than we provided space for. Some are dropped.
366
[    4.879165] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
367
[    4.879184] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
368
[    4.917315] em28xx 1-1.4.1:1.0: chip ID is em28178
369
[    5.029821] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
370
[    5.029833] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
371
[    5.029841] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
372
[    5.029853] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 05 32 c6 00 00 02 00 00 00
373
[    5.029861] print_req_error: I/O error, dev sr0, sector 1362712
374
[    5.036619] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
375
[    5.036632] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
376
[    5.036645] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
377
[    5.036658] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 05 32 c6 00 00 02 00 00 00
378
[    5.036666] print_req_error: I/O error, dev sr0, sector 1362712
379
[    5.036679] Buffer I/O error on dev sr0, logical block 170339, async page read
380
[    5.042024] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
381
[    5.042037] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
382
[    5.042045] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
383
[    5.042054] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
384
[    5.042063] print_req_error: I/O error, dev sr0, sector 0
385
[    5.047947] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
386
[    5.047957] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
387
[    5.047964] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
388
[    5.047974] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
389
[    5.047982] print_req_error: I/O error, dev sr0, sector 0
390
[    5.047991] Buffer I/O error on dev sr0, logical block 0, async page read
391
[    5.056380] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
392
[    5.056394] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
393
[    5.056406] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
394
[    5.056416] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
395
[    5.056427] print_req_error: I/O error, dev sr0, sector 0
396
[    5.056437] Buffer I/O error on dev sr0, logical block 0, async page read
397
[    5.062821] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
398
[    5.062834] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
399
[    5.062843] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
400
[    5.062859] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
401
[    5.062868] print_req_error: I/O error, dev sr0, sector 0
402
[    5.062880] Buffer I/O error on dev sr0, logical block 0, async page read
403
[    5.068339] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
404
[    5.068350] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
405
[    5.068357] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
406
[    5.068366] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
407
[    5.068376] print_req_error: I/O error, dev sr0, sector 0
408
[    5.068388] Buffer I/O error on dev sr0, logical block 0, async page read
409
[    5.074112] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
410
[    5.074123] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
411
[    5.074131] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
412
[    5.074140] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
413
[    5.074151] print_req_error: I/O error, dev sr0, sector 0
414
[    5.074161] Buffer I/O error on dev sr0, logical block 0, async page read
415
[    5.080868] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
416
[    5.080880] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
417
[    5.080891] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
418
[    5.080900] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
419
[    5.080908] print_req_error: I/O error, dev sr0, sector 0
420
[    5.080917] Buffer I/O error on dev sr0, logical block 0, async page read
421
[    5.083960] sr 1:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
422
[    5.083970] sr 1:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
423
[    5.083982] sr 1:0:0:0: [sr0] tag#0 ASC=0x64 ASCQ=0x0 
424
[    5.083995] sr 1:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 02 00 00 00
425
[    5.084005] print_req_error: I/O error, dev sr0, sector 0
426
[    5.084015] Buffer I/O error on dev sr0, logical block 0, async page read
427
[    5.095707] Buffer I/O error on dev sr0, logical block 0, async page read
428
[    5.100748] Buffer I/O error on dev sr0, logical block 0, async page read
429
[    5.333681] bcmgenet fd580000.genet eth0: Link is Down
430
[    6.930721] em28xx 1-1.4.1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x93e2c604
431
[    6.930729] em28xx 1-1.4.1:1.0: EEPROM info:
432
[    6.930736] em28xx 1-1.4.1:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
433
[    6.937634] em28xx 1-1.4.1:1.0: 	AC97 audio (5 sample rates)
434
[    6.937643] em28xx 1-1.4.1:1.0: 	500mA max power
435
[    6.937651] em28xx 1-1.4.1:1.0: 	Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
436
[    6.993562] em28xx 1-1.4.1:1.0: Identified as PCTV tripleStick (292e) (card=94)
437
[    6.993572] em28xx 1-1.4.1:1.0: dvb set to isoc mode.
438
[    6.994011] usbcore: registered new interface driver em28xx
439
[    7.013713] em28xx 1-1.4.1:1.0: Binding DVB extension
440
[    7.039190] i2c i2c-8: Added multiplexed i2c bus 9
441
[    7.039199] si2168 8-0064: Silicon Labs Si2168-B40 successfully identified
442
[    7.039206] si2168 8-0064: firmware version: B 4.0.2
443
[    7.055999] si2157 9-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
444
[    7.056068] dvbdev: DVB: registering new adapter (1-1.4.1:1.0)
445
[    7.056079] em28xx 1-1.4.1:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
446
[    7.059787] si2168 8-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
447
[    7.063516] em28xx 1-1.4.1:1.0: DVB extension successfully initialized
448
[    7.063548] em28xx: Registered (Em28xx dvb Extension) extension
449
[    7.088241] em28xx 1-1.4.1:1.0: Registering input extension
450
[    7.123570] Registered IR keymap rc-pinnacle-pctv-hd
451
[    7.124340] rc rc0: 1-1.4.1:1.0 IR as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/rc/rc0
452
[    7.124650] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
453
[    7.124746] input: 1-1.4.1:1.0 IR as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/rc/rc0/input3
454
[    7.125036] em28xx 1-1.4.1:1.0: Input extension successfully initialized
455
[    7.125042] em28xx: Registered (Em28xx Input Extension) extension
456
[    7.391689] si2168 8-0064: firmware version: B 4.0.11
457
[    7.397775] si2157 9-0060: found a 'Silicon Labs Si2157-A30'
458
[    7.447904] si2157 9-0060: firmware version: 3.0.5
459
[    7.447952] em28xx 1-1.4.1:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
460
[    7.454646] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
461
[   11.268233] Bluetooth: Core ver 2.22
462
[   11.268277] NET: Registered protocol family 31
463
[   11.268283] Bluetooth: HCI device and connection manager initialized
464
[   11.268295] Bluetooth: HCI socket layer initialized
465
[   11.268305] Bluetooth: L2CAP socket layer initialized
466
[   11.268328] Bluetooth: SCO socket layer initialized
467
[   11.273443] Bluetooth: HCI UART driver ver 2.3
468
[   11.273453] Bluetooth: HCI UART protocol H4 registered
469
[   11.273496] Bluetooth: HCI UART protocol Three-wire (H5) registered
470
[   11.273663] Bluetooth: HCI UART protocol Broadcom registered
471
[   24.108831] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
472
[   26.893245] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
473
[   59.577929] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
474
[   96.775157] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
475
[  115.841861] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
476
[  155.575414] em28xx 1-1.4.1:1.0: write to i2c device at 0xc0 failed with unknown error (status=133)
477
[  172.082387] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
478
[  237.003534] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
479
[  243.468444] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
480
[  247.997093] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
481
[  255.998213] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
482
[  256.998356] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
483
[  265.999646] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
484
[  352.907933] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
485
[  393.009598] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
486
[  401.010772] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
487
[  404.755322] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
488
[  412.012349] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
489
[  413.012459] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
490
[  418.013174] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
491
[  470.028574] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
492
[  525.708453] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
493
[  529.548999] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
494
[  539.030369] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
495
[  549.023763] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
496
[  550.023900] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
497
[  559.025182] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
498
[  569.026610] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
499
[  694.668480] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
500
[  750.348453] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
501
[  754.188954] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
502
[  775.293884] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
503
[  824.268962] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
504
[  875.948354] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
505
[  983.867686] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
506
[ 1043.708398] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
507
[ 1062.775082] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
508
[ 1270.428907] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
509
[ 1466.294976] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
510
[ 1854.134834] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
511
[ 1909.814853] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
512
[ 2098.195033] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
513
[ 2102.027573] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
514
[ 2382.348063] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
515
[ 2447.629474] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
516
[ 2514.831186] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
517
[ 2659.473591] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
518
[ 2992.489725] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
519
[ 2996.330275] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
520
[ 3141.119217] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
521
[ 3142.119366] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
522
[ 3151.112669] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
523
[ 3160.113961] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
524
[ 3161.114135] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
525
[ 3161.450170] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
526
[ 3170.115420] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
527
[ 3209.457105] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
528
[ 3213.289669] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
529
[ 3287.221675] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
530
[ 3296.302966] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
531
[ 3377.930862] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
532
[ 3439.611780] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
533
[ 3452.333620] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
534
[ 3505.829356] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
535
[ 3553.884299] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
536
[ 3629.167205] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
537
[ 3651.834489] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
538
[ 3662.716077] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
539
[ 3699.009219] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
540
[ 3721.676607] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
541
[ 3760.698244] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
542
[ 3765.250818] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
543
[ 3782.485396] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
544
[ 3787.037967] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
545
[ 3829.652147] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
546
[ 3859.600580] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
547
[ 3872.491842] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
548
[ 3889.734411] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
549
[ 3943.254137] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
550
[ 4133.737719] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
551
[ 4145.523471] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
552
[ 4153.684601] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
553
[ 4173.631510] em28xx 1-1.4.1:1.0: write to i2c device at 0xc8 failed with unknown error (status=128)
    (1-1/1)