Project

General

Profile

DVBsky tuner 960 disconnects and failed after 2 days. nee... ยป Dmesg1.txt

strammer max, 2013-10-18 18:21

 
1
[    0.000000] Initializing cgroup subsys cpuset
2
[    0.000000] Initializing cgroup subsys cpu
3
[    0.000000] Linux version 3.8.0-30-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #44-Ubuntu SMP Thu Aug 22 20:52:24 UTC 2013 (Ubuntu 3.8.0-30.44-generic 3.8.13.6)
4
[    0.000000] Command line: auto BOOT_IMAGE=Linux ro root=/dev/sdb1 quiet
5
[    0.000000] KERNEL supported cpus:
6
[    0.000000]   Intel GenuineIntel
7
[    0.000000]   AMD AuthenticAMD
8
[    0.000000]   Centaur CentaurHauls
9
[    0.000000] e820: BIOS-provided physical RAM map:
10
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
11
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
12
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aea02fff] usable
13
[    0.000000] BIOS-e820: [mem 0x00000000aea03000-0x00000000aea55fff] reserved
14
[    0.000000] BIOS-e820: [mem 0x00000000aea56000-0x00000000af47efff] ACPI NVS
15
[    0.000000] BIOS-e820: [mem 0x00000000af47f000-0x00000000af87bfff] reserved
16
[    0.000000] BIOS-e820: [mem 0x00000000af87c000-0x00000000af87cfff] usable
17
[    0.000000] BIOS-e820: [mem 0x00000000af87d000-0x00000000af883fff] ACPI NVS
18
[    0.000000] BIOS-e820: [mem 0x00000000af884000-0x00000000afb36fff] usable
19
[    0.000000] BIOS-e820: [mem 0x00000000afc98000-0x00000000afef2fff] reserved
20
[    0.000000] BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] usable
21
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
22
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
23
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
24
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
25
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
26
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
27
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
28
[    0.000000] NX (Execute Disable) protection: active
29
[    0.000000] SMBIOS 2.7 present.
30
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1, BIOS P1.80 12/21/2012
31
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
32
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
33
[    0.000000] No AGP bridge found
34
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
35
[    0.000000] MTRR default type: uncachable
36
[    0.000000] MTRR fixed ranges enabled:
37
[    0.000000]   00000-9FFFF write-back
38
[    0.000000]   A0000-BFFFF write-through
39
[    0.000000]   C0000-CEFFF write-protect
40
[    0.000000]   CF000-EBFFF uncachable
41
[    0.000000]   EC000-FFFFF write-protect
42
[    0.000000] MTRR variable ranges enabled:
43
[    0.000000]   0 base 000000000 mask F00000000 write-back
44
[    0.000000]   1 base 0AFF00000 mask FFFF00000 uncachable
45
[    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
46
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
47
[    0.000000]   4 disabled
48
[    0.000000]   5 disabled
49
[    0.000000]   6 disabled
50
[    0.000000]   7 disabled
51
[    0.000000] TOM2: 000000013f000000 aka 5104M
52
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
53
[    0.000000] original variable MTRRs
54
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
55
[    0.000000] reg 1, base: 2815MB, range: 1MB, type UC
56
[    0.000000] reg 2, base: 2816MB, range: 256MB, type UC
57
[    0.000000] reg 3, base: 3GB, range: 1GB, type UC
58
[    0.000000] total RAM covered: 2815M
59
[    0.000000] Found optimal setting for mtrr clean up
60
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
61
[    0.000000] New variable MTRRs
62
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
63
[    0.000000] reg 1, base: 2GB, range: 512MB, type WB
64
[    0.000000] reg 2, base: 2560MB, range: 256MB, type WB
65
[    0.000000] reg 3, base: 2815MB, range: 1MB, type UC
66
[    0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
67
[    0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
68
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
69
[    0.000000] iBFT found at 0x9e810.
70
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
71
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
72
[    0.000000] Using GB pages for direct mapping
73
[    0.000000] init_memory_mapping: [mem 0x00000000-0xafefffff]
74
[    0.000000]  [mem 0x00000000-0x7fffffff] page 1G
75
[    0.000000]  [mem 0x80000000-0xafdfffff] page 2M
76
[    0.000000]  [mem 0xafe00000-0xafefffff] page 4k
77
[    0.000000] kernel direct mapping tables up to 0xafefffff @ [mem 0x1fffd000-0x1fffffff]
78
[    0.000000] init_memory_mapping: [mem 0x100001000-0x13effffff]
79
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
80
[    0.000000]  [mem 0x100200000-0x13effffff] page 2M
81
[    0.000000] kernel direct mapping tables up to 0x13effffff @ [mem 0xafefd000-0xafefffff]
82
[    0.000000] RAMDISK: [mem 0x7f06b000-0x7fffffff]
83
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
84
[    0.000000] ACPI: XSDT 00000000af470078 0006C (v01 ALASKA    A M I 01072009 AMI  00010013)
85
[    0.000000] ACPI: FACP 00000000af4759b8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
86
[    0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
87
[    0.000000] ACPI: DSDT 00000000af470178 0583F (v02 ALASKA    A M I 00000000 INTL 20051117)
88
[    0.000000] ACPI: FACS 00000000af47df80 00040
89
[    0.000000] ACPI: APIC 00000000af475ab0 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
90
[    0.000000] ACPI: FPDT 00000000af475b18 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
91
[    0.000000] ACPI: MCFG 00000000af475b60 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
92
[    0.000000] ACPI: AAFT 00000000af475ba0 00042 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
93
[    0.000000] ACPI: HPET 00000000af475be8 00038 (v01 ALASKA    A M I 01072009 AMI  00000005)
94
[    0.000000] ACPI: SSDT 00000000af475c20 003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
95
[    0.000000] ACPI: SSDT 00000000af476000 0168E (v02    AMD     ALIB 00000001 MSFT 04000000)
96
[    0.000000] ACPI: BGRT 00000000af477690 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
97
[    0.000000] ACPI: Local APIC address 0xfee00000
98
[    0.000000] No NUMA configuration found
99
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
100
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13effffff]
101
[    0.000000]   NODE_DATA [mem 0x13effb000-0x13effffff]
102
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013aa00000-ffff88013e5fffff] on node 0
103
[    0.000000] Zone ranges:
104
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
105
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
106
[    0.000000]   Normal   [mem 0x100000000-0x13effffff]
107
[    0.000000] Movable zone start for each node
108
[    0.000000] Early memory node ranges
109
[    0.000000]   node   0: [mem 0x00010000-0x0009bfff]
110
[    0.000000]   node   0: [mem 0x00100000-0xaea02fff]
111
[    0.000000]   node   0: [mem 0xaf87c000-0xaf87cfff]
112
[    0.000000]   node   0: [mem 0xaf884000-0xafb36fff]
113
[    0.000000]   node   0: [mem 0xafef3000-0xafefffff]
114
[    0.000000]   node   0: [mem 0x100001000-0x13effffff]
115
[    0.000000] On node 0 totalpages: 973903
116
[    0.000000]   DMA zone: 64 pages used for memmap
117
[    0.000000]   DMA zone: 6 pages reserved
118
[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
119
[    0.000000]   DMA32 zone: 11124 pages used for memmap
120
[    0.000000]   DMA32 zone: 700752 pages, LIFO batch:31
121
[    0.000000]   Normal zone: 4032 pages used for memmap
122
[    0.000000]   Normal zone: 254015 pages, LIFO batch:31
123
[    0.000000] ACPI: PM-Timer IO Port: 0x808
124
[    0.000000] ACPI: Local APIC address 0xfee00000
125
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
126
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
127
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
128
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
129
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
130
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
131
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
132
[    0.000000] ACPI: IRQ0 used by override.
133
[    0.000000] ACPI: IRQ2 used by override.
134
[    0.000000] ACPI: IRQ9 used by override.
135
[    0.000000] Using ACPI (MADT) for SMP configuration information
136
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
137
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
138
[    0.000000] nr_irqs_gsi: 40
139
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000e0000
140
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
141
[    0.000000] PM: Registered nosave memory: 00000000aea03000 - 00000000aea56000
142
[    0.000000] PM: Registered nosave memory: 00000000aea56000 - 00000000af47f000
143
[    0.000000] PM: Registered nosave memory: 00000000af47f000 - 00000000af87c000
144
[    0.000000] PM: Registered nosave memory: 00000000af87d000 - 00000000af884000
145
[    0.000000] PM: Registered nosave memory: 00000000afb37000 - 00000000afc98000
146
[    0.000000] PM: Registered nosave memory: 00000000afc98000 - 00000000afef3000
147
[    0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
148
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
149
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
150
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
151
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
152
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
153
[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
154
[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
155
[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
156
[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
157
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
158
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
159
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
160
[    0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
161
[    0.000000] Booting paravirtualized kernel on bare hardware
162
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
163
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s85056 r8192 d21440 u1048576
164
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u1048576 alloc=1*2097152
165
[    0.000000] pcpu-alloc: [0] 0 1 
166
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 958677
167
[    0.000000] Policy zone: Normal
168
[    0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/sdb1 quiet
169
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
170
[    0.000000] __ex_table already sorted, skipping sort
171
[    0.000000] Checking aperture...
172
[    0.000000] No AGP bridge found
173
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
174
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
175
[    0.000000] Memory: 3736112k/5226496k available (7014k kernel code, 1330884k absent, 159500k reserved, 6229k data, 996k init)
176
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
177
[    0.000000] Hierarchical RCU implementation.
178
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
179
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
180
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
181
[    0.000000] Extended CMOS year: 2000
182
[    0.000000] Console: colour VGA+ 80x25
183
[    0.000000] console [tty0] enabled
184
[    0.000000] allocated 15728640 bytes of page_cgroup
185
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
186
[    0.000000] hpet clockevent registered
187
[    0.000000] tsc: Fast TSC calibration using PIT
188
[    0.004000] tsc: Detected 1600.035 MHz processor
189
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.07 BogoMIPS (lpj=6400140)
190
[    0.000012] pid_max: default: 32768 minimum: 301
191
[    0.000066] Security Framework initialized
192
[    0.000092] AppArmor: AppArmor initialized
193
[    0.000095] Yama: becoming mindful.
194
[    0.000695] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
195
[    0.003240] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
196
[    0.004372] Mount-cache hash table entries: 256
197
[    0.004734] Initializing cgroup subsys cpuacct
198
[    0.004743] Initializing cgroup subsys memory
199
[    0.004759] Initializing cgroup subsys devices
200
[    0.004763] Initializing cgroup subsys freezer
201
[    0.004767] Initializing cgroup subsys blkio
202
[    0.004770] Initializing cgroup subsys perf_event
203
[    0.004775] Initializing cgroup subsys hugetlb
204
[    0.004823] tseg: 00aff00000
205
[    0.004828] CPU: Physical Processor ID: 0
206
[    0.004830] CPU: Processor Core ID: 0
207
[    0.004834] mce: CPU supports 6 MCE banks
208
[    0.004853] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
209
[    0.004853] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
210
[    0.004853] tlb_flushall_shift: 5
211
[    0.005088] Freeing SMP alternatives: 24k freed
212
[    0.009791] ACPI: Core revision 20121018
213
[    0.016820] ftrace: allocating 26715 entries in 105 pages
214
[    0.042372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
215
[    0.082007] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
216
[    0.189196] Performance Events: AMD PMU driver.
217
[    0.189204] ... version:                0
218
[    0.189207] ... bit width:              48
219
[    0.189210] ... generic registers:      4
220
[    0.189212] ... value mask:             0000ffffffffffff
221
[    0.189215] ... max period:             00007fffffffffff
222
[    0.189217] ... fixed-purpose events:   0
223
[    0.189220] ... event mask:             000000000000000f
224
[    0.191561] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225
[    0.191770] smpboot: Booting Node   0, Processors  #1 OK
226
[    0.204814] Brought up 2 CPUs
227
[    0.204819] smpboot: Total of 2 processors activated (6400.14 BogoMIPS)
228
[    0.206192] devtmpfs: initialized
229
[    0.208967] EVM: security.selinux
230
[    0.208971] EVM: security.SMACK64
231
[    0.208973] EVM: security.capability
232
[    0.209333] PM: Registering ACPI NVS region [mem 0xaea56000-0xaf47efff] (10653696 bytes)
233
[    0.209709] PM: Registering ACPI NVS region [mem 0xaf87d000-0xaf883fff] (28672 bytes)
234
[    0.211607] regulator-dummy: no parameters
235
[    0.211723] NET: Registered protocol family 16
236
[    0.212151] ACPI: bus type pci registered
237
[    0.212256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
238
[    0.212262] PCI: not using MMCONFIG
239
[    0.212266] PCI: Using configuration type 1 for base access
240
[    0.212268] PCI: Using configuration type 1 for extended access
241
[    0.214477] bio: create slab <bio-0> at 0
242
[    0.214787] ACPI: Added _OSI(Module Device)
243
[    0.214791] ACPI: Added _OSI(Processor Device)
244
[    0.214794] ACPI: Added _OSI(3.0 _SCP Extensions)
245
[    0.214797] ACPI: Added _OSI(Processor Aggregator Device)
246
[    0.216598] ACPI: EC: Look up EC in DSDT
247
[    0.218655] ACPI: Executed 2 blocks of module-level executable AML code
248
[    0.226360] ACPI: Interpreter enabled
249
[    0.226374] ACPI: (supports S0 S3 S4 S5)
250
[    0.226407] ACPI: Using IOAPIC for interrupt routing
251
[    0.226458] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
252
[    0.226544] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
253
[    0.259259] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
254
[    0.261076] ACPI: No dock devices found.
255
[    0.261122] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256
[    0.261450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
257
[    0.261456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
258
[    0.262085] PCI host bridge to bus 0000:00
259
[    0.262092] pci_bus 0000:00: root bus resource [bus 00-ff]
260
[    0.262097] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
261
[    0.262102] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
262
[    0.262106] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
263
[    0.262110] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
264
[    0.262115] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
265
[    0.262119] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
266
[    0.262123] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
267
[    0.262140] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
268
[    0.262207] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
269
[    0.262223] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
270
[    0.262234] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
271
[    0.262246] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
272
[    0.262311] pci 0000:00:01.0: supports D1 D2
273
[    0.262337] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
274
[    0.262351] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
275
[    0.262428] pci 0000:00:01.1: supports D1 D2
276
[    0.262461] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
277
[    0.262542] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
278
[    0.262594] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
279
[    0.262619] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
280
[    0.262633] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
281
[    0.262647] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
282
[    0.262661] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
283
[    0.262674] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
284
[    0.262688] pci 0000:00:11.0: reg 24: [mem 0xfeb4f000-0xfeb4f3ff]
285
[    0.262764] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
286
[    0.262783] pci 0000:00:12.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
287
[    0.262874] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
288
[    0.262900] pci 0000:00:12.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
289
[    0.263002] pci 0000:00:12.2: supports D1 D2
290
[    0.263006] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
291
[    0.263038] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
292
[    0.263057] pci 0000:00:13.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
293
[    0.263148] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
294
[    0.263174] pci 0000:00:13.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
295
[    0.263276] pci 0000:00:13.2: supports D1 D2
296
[    0.263280] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
297
[    0.263318] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
298
[    0.263419] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
299
[    0.263448] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
300
[    0.263531] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
301
[    0.263554] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
302
[    0.263651] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
303
[    0.263707] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
304
[    0.263726] pci 0000:00:14.5: reg 10: [mem 0xfeb4a000-0xfeb4afff]
305
[    0.263819] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
306
[    0.263918] pci 0000:00:15.0: supports D1 D2
307
[    0.263953] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
308
[    0.264052] pci 0000:00:15.1: supports D1 D2
309
[    0.264091] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
310
[    0.264110] pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
311
[    0.264204] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
312
[    0.264230] pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
313
[    0.264332] pci 0000:00:16.2: supports D1 D2
314
[    0.264336] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
315
[    0.264371] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
316
[    0.264423] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
317
[    0.264470] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
318
[    0.264520] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
319
[    0.264582] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
320
[    0.264628] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
321
[    0.264675] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
322
[    0.264725] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
323
[    0.264832] pci 0000:00:04.0: PCI bridge to [bus 01]
324
[    0.264919] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
325
[    0.264932] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
326
[    0.264936] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
327
[    0.264941] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
328
[    0.264945] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
329
[    0.264949] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
330
[    0.264953] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
331
[    0.264958] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
332
[    0.265022] pci 0000:00:15.0: PCI bridge to [bus 03]
333
[    0.265136] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
334
[    0.265160] pci 0000:04:00.0: reg 10: [io  0xe000-0xe0ff]
335
[    0.265198] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
336
[    0.265223] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
337
[    0.265322] pci 0000:04:00.0: supports D1 D2
338
[    0.265326] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
339
[    0.273302] pci 0000:00:15.1: PCI bridge to [bus 04]
340
[    0.273329] pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
341
[    0.273349] pci 0000:00:15.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
342
[    0.273497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
343
[    0.273590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
344
[    0.273665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
345
[    0.273720]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
346
[    0.273724]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
347
[    0.275976] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15)
348
[    0.276095] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15)
349
[    0.276207] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15)
350
[    0.276318] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15)
351
[    0.276408] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
352
[    0.276481] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
353
[    0.276553] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
354
[    0.276625] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
355
[    0.276973] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
356
[    0.276991] vgaarb: loaded
357
[    0.276994] vgaarb: bridge control possible 0000:00:01.0
358
[    0.277420] SCSI subsystem initialized
359
[    0.277425] ACPI: bus type scsi registered
360
[    0.277723] libata version 3.00 loaded.
361
[    0.277784] ACPI: bus type usb registered
362
[    0.277834] usbcore: registered new interface driver usbfs
363
[    0.277852] usbcore: registered new interface driver hub
364
[    0.278134] usbcore: registered new device driver usb
365
[    0.278654] PCI: Using ACPI for IRQ routing
366
[    0.288600] PCI: pci_cache_line_size set to 64 bytes
367
[    0.288716] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
368
[    0.288720] e820: reserve RAM buffer [mem 0xaea03000-0xafffffff]
369
[    0.288724] e820: reserve RAM buffer [mem 0xaf87d000-0xafffffff]
370
[    0.288728] e820: reserve RAM buffer [mem 0xafb37000-0xafffffff]
371
[    0.288731] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
372
[    0.288734] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
373
[    0.288953] NetLabel: Initializing
374
[    0.288956] NetLabel:  domain hash size = 128
375
[    0.288958] NetLabel:  protocols = UNLABELED CIPSOv4
376
[    0.288977] NetLabel:  unlabeled traffic allowed by default
377
[    0.289203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
378
[    0.289215] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
379
[    0.291243] Switching to clocksource hpet
380
[    0.301833] AppArmor: AppArmor Filesystem Enabled
381
[    0.301895] pnp: PnP ACPI init
382
[    0.301927] ACPI: bus type pnp registered
383
[    0.302158] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
384
[    0.302167] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
385
[    0.303147] system 00:01: [io  0x040b] has been reserved
386
[    0.303153] system 00:01: [io  0x04d6] has been reserved
387
[    0.303158] system 00:01: [io  0x0c00-0x0c01] has been reserved
388
[    0.303163] system 00:01: [io  0x0c14] has been reserved
389
[    0.303168] system 00:01: [io  0x0c50-0x0c51] has been reserved
390
[    0.303172] system 00:01: [io  0x0c52] has been reserved
391
[    0.303177] system 00:01: [io  0x0c6c] has been reserved
392
[    0.303181] system 00:01: [io  0x0c6f] has been reserved
393
[    0.303186] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
394
[    0.303190] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
395
[    0.303195] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
396
[    0.303199] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
397
[    0.303204] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
398
[    0.303208] system 00:01: [io  0x0800-0x089f] has been reserved
399
[    0.303213] system 00:01: [io  0x0b20-0x0b3f] has been reserved
400
[    0.303218] system 00:01: [io  0x0900-0x090f] has been reserved
401
[    0.303222] system 00:01: [io  0x0910-0x091f] has been reserved
402
[    0.303227] system 00:01: [io  0xfe00-0xfefe] has been reserved
403
[    0.303233] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
404
[    0.303239] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
405
[    0.303244] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
406
[    0.303249] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
407
[    0.303254] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
408
[    0.303259] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
409
[    0.303264] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
410
[    0.303271] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
411
[    0.303466] system 00:02: [io  0x0290-0x029f] has been reserved
412
[    0.303473] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
413
[    0.303663] pnp 00:03: [dma 4]
414
[    0.303696] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
415
[    0.303762] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
416
[    0.303804] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
417
[    0.303911] system 00:06: [io  0x04d0-0x04d1] has been reserved
418
[    0.303918] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
419
[    0.303966] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
420
[    0.304039] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
421
[    0.304506] system 00:09: [mem 0xb0000000-0xbfffffff] has been reserved
422
[    0.304513] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
423
[    0.304786] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
424
[    0.304795] pnp: PnP ACPI: found 11 devices
425
[    0.304798] ACPI: ACPI bus type pnp unregistered
426
[    0.314886] pci 0000:00:04.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
427
[    0.314899] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
428
[    0.314905] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
429
[    0.314941] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
430
[    0.314946] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
431
[    0.314951] pci 0000:00:04.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
432
[    0.314962] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
433
[    0.314969] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
434
[    0.314976] pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
435
[    0.314982] pci 0000:00:04.0: PCI bridge to [bus 01]
436
[    0.314988] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
437
[    0.314995] pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd02fffff]
438
[    0.315003] pci 0000:00:04.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
439
[    0.315011] pci 0000:00:14.4: PCI bridge to [bus 02]
440
[    0.315028] pci 0000:00:15.0: PCI bridge to [bus 03]
441
[    0.315043] pci 0000:00:15.1: PCI bridge to [bus 04]
442
[    0.315048] pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
443
[    0.315058] pci 0000:00:15.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
444
[    0.315116] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
445
[    0.315121] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
446
[    0.315125] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
447
[    0.315129] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
448
[    0.315133] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
449
[    0.315137] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
450
[    0.315141] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
451
[    0.315146] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
452
[    0.315150] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
453
[    0.315154] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
454
[    0.315159] pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
455
[    0.315162] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
456
[    0.315166] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
457
[    0.315170] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
458
[    0.315174] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
459
[    0.315178] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
460
[    0.315182] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
461
[    0.315187] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
462
[    0.315191] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
463
[    0.315258] NET: Registered protocol family 2
464
[    0.315570] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
465
[    0.315899] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
466
[    0.316171] TCP: Hash tables configured (established 32768 bind 32768)
467
[    0.316265] TCP: reno registered
468
[    0.316291] UDP hash table entries: 2048 (order: 4, 65536 bytes)
469
[    0.316347] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
470
[    0.316525] NET: Registered protocol family 1
471
[    0.316561] pci 0000:00:01.0: Boot video device
472
[    0.639164] PCI: CLS 64 bytes, default 64
473
[    0.639272] Trying to unpack rootfs image as initramfs...
474
[    1.158522] Freeing initrd memory: 15956k freed
475
[    1.167248] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
476
[    1.167259] software IO TLB [mem 0xaaa03000-0xaea03000] (64MB) mapped at [ffff8800aaa03000-ffff8800aea02fff]
477
[    1.167533] LVT offset 0 assigned for vector 0x400
478
[    1.167619] perf: AMD IBS detected (0x000000ff)
479
[    1.167998] Initialise module verification
480
[    1.168089] audit: initializing netlink socket (disabled)
481
[    1.168112] type=2000 audit(1382008165.052:1): initialized
482
[    1.213767] HugeTLB registered 2 MB page size, pre-allocated 0 pages
483
[    1.217249] VFS: Disk quotas dquot_6.5.2
484
[    1.217340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
485
[    1.218394] fuse init (API version 7.20)
486
[    1.218576] msgmni has been set to 7328
487
[    1.219467] Key type asymmetric registered
488
[    1.219474] Asymmetric key parser 'x509' registered
489
[    1.219552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
490
[    1.219635] io scheduler noop registered
491
[    1.219644] io scheduler deadline registered (default)
492
[    1.219666] io scheduler cfq registered
493
[    1.220053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
494
[    1.220082] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
495
[    1.220283] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
496
[    1.220292] ACPI: Power Button [PWRB]
497
[    1.220360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
498
[    1.220365] ACPI: Power Button [PWRF]
499
[    1.220501] ACPI: acpi_idle registered with cpuidle
500
[    1.254856] GHES: HEST is not enabled!
501
[    1.255053] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
502
[    1.259111] Linux agpgart interface v0.103
503
[    1.261845] brd: module loaded
504
[    1.263305] loop: module loaded
505
[    1.263972] libphy: Fixed MDIO Bus: probed
506
[    1.264100] tun: Universal TUN/TAP device driver, 1.6
507
[    1.264103] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
508
[    1.264193] PPP generic driver version 2.4.2
509
[    1.264303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
510
[    1.264307] ehci-pci: EHCI PCI platform driver
511
[    1.264420] ehci-pci 0000:00:12.2: EHCI Host Controller
512
[    1.264433] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
513
[    1.264448] QUIRK: Enable AMD PLL fix
514
[    1.264453] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
515
[    1.264470] ehci-pci 0000:00:12.2: debug port 1
516
[    1.264541] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
517
[    1.273897] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
518
[    1.273984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
519
[    1.273989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
520
[    1.273994] usb usb1: Product: EHCI Host Controller
521
[    1.273998] usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
522
[    1.274002] usb usb1: SerialNumber: 0000:00:12.2
523
[    1.274427] hub 1-0:1.0: USB hub found
524
[    1.274443] hub 1-0:1.0: 5 ports detected
525
[    1.274683] ehci-pci 0000:00:13.2: EHCI Host Controller
526
[    1.274696] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
527
[    1.274705] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
528
[    1.274722] ehci-pci 0000:00:13.2: debug port 1
529
[    1.274766] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
530
[    1.285984] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
531
[    1.286071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
532
[    1.286076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533
[    1.286081] usb usb2: Product: EHCI Host Controller
534
[    1.286085] usb usb2: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
535
[    1.286089] usb usb2: SerialNumber: 0000:00:13.2
536
[    1.286464] hub 2-0:1.0: USB hub found
537
[    1.286479] hub 2-0:1.0: 5 ports detected
538
[    1.286699] ehci-pci 0000:00:16.2: EHCI Host Controller
539
[    1.286711] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
540
[    1.286720] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
541
[    1.286737] ehci-pci 0000:00:16.2: debug port 1
542
[    1.286784] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
543
[    1.297974] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
544
[    1.298045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
545
[    1.298051] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546
[    1.298055] usb usb3: Product: EHCI Host Controller
547
[    1.298060] usb usb3: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
548
[    1.298064] usb usb3: SerialNumber: 0000:00:16.2
549
[    1.298433] hub 3-0:1.0: USB hub found
550
[    1.298451] hub 3-0:1.0: 4 ports detected
551
[    1.298627] ehci-platform: EHCI generic platform driver
552
[    1.298646] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
553
[    1.298714] ohci_hcd 0000:00:12.0: OHCI Host Controller
554
[    1.298725] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
555
[    1.298775] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
556
[    1.357889] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
557
[    1.357898] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
558
[    1.357903] usb usb4: Product: OHCI Host Controller
559
[    1.357907] usb usb4: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
560
[    1.357911] usb usb4: SerialNumber: 0000:00:12.0
561
[    1.358312] hub 4-0:1.0: USB hub found
562
[    1.358329] hub 4-0:1.0: 5 ports detected
563
[    1.358549] ohci_hcd 0000:00:13.0: OHCI Host Controller
564
[    1.358561] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
565
[    1.358593] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
566
[    1.417789] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
567
[    1.417799] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
568
[    1.417803] usb usb5: Product: OHCI Host Controller
569
[    1.417808] usb usb5: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
570
[    1.417812] usb usb5: SerialNumber: 0000:00:13.0
571
[    1.418230] hub 5-0:1.0: USB hub found
572
[    1.418247] hub 5-0:1.0: 5 ports detected
573
[    1.418469] ohci_hcd 0000:00:14.5: OHCI Host Controller
574
[    1.418481] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
575
[    1.418513] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
576
[    1.477762] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
577
[    1.477772] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
578
[    1.477777] usb usb6: Product: OHCI Host Controller
579
[    1.477781] usb usb6: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
580
[    1.477785] usb usb6: SerialNumber: 0000:00:14.5
581
[    1.478168] hub 6-0:1.0: USB hub found
582
[    1.478188] hub 6-0:1.0: 2 ports detected
583
[    1.478361] ohci_hcd 0000:00:16.0: OHCI Host Controller
584
[    1.478373] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
585
[    1.478406] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
586
[    1.537614] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
587
[    1.537623] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
588
[    1.537628] usb usb7: Product: OHCI Host Controller
589
[    1.537633] usb usb7: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
590
[    1.537637] usb usb7: SerialNumber: 0000:00:16.0
591
[    1.538039] hub 7-0:1.0: USB hub found
592
[    1.538055] hub 7-0:1.0: 4 ports detected
593
[    1.538234] uhci_hcd: USB Universal Host Controller Interface driver
594
[    1.538359] i8042: PNP: No PS/2 controller found. Probing ports directly.
595
[    1.541430] serio: i8042 KBD port at 0x60,0x64 irq 1
596
[    1.541452] serio: i8042 AUX port at 0x60,0x64 irq 12
597
[    1.541874] mousedev: PS/2 mouse device common for all mice
598
[    1.542582] rtc_cmos 00:04: RTC can wake from S4
599
[    1.542746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
600
[    1.542784] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
601
[    1.542954] device-mapper: uevent: version 1.0.3
602
[    1.543074] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
603
[    1.543133] cpuidle: using governor ladder
604
[    1.543202] cpuidle: using governor menu
605
[    1.543208] ledtrig-cpu: registered to indicate activity on CPUs
606
[    1.543211] EFI Variables Facility v0.08 2004-May-17
607
[    1.543765] ashmem: initialized
608
[    1.543984] TCP: cubic registered
609
[    1.544171] NET: Registered protocol family 10
610
[    1.544485] NET: Registered protocol family 17
611
[    1.544505] Key type dns_resolver registered
612
[    1.544930] Loading module verification certificates
613
[    1.547290] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 3a8155c013f798de7084673b6e86215ebed17697'
614
[    1.547318] registered taskstats version 1
615
[    1.552454] Key type trusted registered
616
[    1.556885] Key type encrypted registered
617
[    1.561967] rtc_cmos 00:04: setting system clock to 2013-10-17 11:09:25 UTC (1382008165)
618
[    1.562101] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
619
[    1.564779] acpi-cpufreq: overriding BIOS provided _PSD data
620
[    1.564952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
621
[    1.564955] EDD information not available.
622
[    1.567787] Freeing unused kernel memory: 996k freed
623
[    1.568318] Write protecting the kernel read-only data: 12288k
624
[    1.575498] Freeing unused kernel memory: 1168k freed
625
[    1.582343] Freeing unused kernel memory: 1076k freed
626
[    1.585402] usb 1-1: new high-speed USB device number 2 using ehci-pci
627
[    1.613089] udevd[96]: starting version 175
628
[    1.706382] Disabling lock debugging due to kernel taint
629
[    1.707545] ahci 0000:00:11.0: version 3.0
630
[    1.707763] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
631
[    1.707772] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
632
[    1.718305] usb 1-1: New USB device found, idVendor=1f75, idProduct=0916
633
[    1.718315] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
634
[    1.718320] usb 1-1: Product: USB DISK
635
[    1.718324] usb 1-1: Manufacturer:  
636
[    1.718328] usb 1-1: SerialNumber: 13041002004019
637
[    1.720208] scsi0 : ahci
638
[    1.724060] scsi1 : ahci
639
[    1.727673] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
640
[    1.727932] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
641
[    1.728237] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc9000064c000, bc:5f:f4:9b:ba:57, XID 0c200000 IRQ 40
642
[    1.728242] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
643
[    1.728574] scsi2 : ahci
644
[    1.729486] scsi3 : ahci
645
[    1.732513] scsi4 : ahci
646
[    1.733345] scsi5 : ahci
647
[    1.733533] ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
648
[    1.733539] ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
649
[    1.733544] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
650
[    1.733548] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
651
[    1.733553] ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f300 irq 19
652
[    1.733558] ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f380 irq 19
653
[    1.829207] usb 1-2: new high-speed USB device number 3 using ehci-pci
654
[    1.962154] usb 1-2: New USB device found, idVendor=0572, idProduct=6831
655
[    1.962171] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
656
[    1.962180] usb 1-2: Product: S960
657
[    1.962188] usb 1-2: Manufacturer: Bestunar
658
[    1.962195] usb 1-2: SerialNumber: 20120511
659
[    2.052794] ata3: SATA link down (SStatus 0 SControl 300)
660
[    2.052856] ata1: SATA link down (SStatus 0 SControl 300)
661
[    2.052897] ata2: SATA link down (SStatus 0 SControl 300)
662
[    2.056801] ata4: SATA link down (SStatus 0 SControl 300)
663
[    2.060802] ata6: SATA link down (SStatus 0 SControl 300)
664
[    2.060860] ata5: SATA link down (SStatus 0 SControl 300)
665
[    2.072603] usb 1-3: new high-speed USB device number 4 using ehci-pci
666
[    2.164608] tsc: Refined TSC clocksource calibration: 1599.999 MHz
667
[    2.164628] Switching to clocksource tsc
668
[    2.206741] usb 1-3: New USB device found, idVendor=0ccd, idProduct=10ad
669
[    2.206757] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
670
[    2.206766] usb 1-3: Product: TerraTec H5
671
[    2.206774] usb 1-3: Manufacturer: TerraTec Electronic GmbH
672
[    2.206782] usb 1-3: SerialNumber: 100302000150
673
[    2.316400] usb 1-4: new high-speed USB device number 5 using ehci-pci
674
[    2.449093] usb 1-4: New USB device found, idVendor=734c, idProduct=5922
675
[    2.449109] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
676
[    2.458808] Initializing USB Mass Storage driver...
677
[    2.459075] scsi6 : usb-storage 1-1:1.0
678
[    2.459235] usbcore: registered new interface driver usb-storage
679
[    2.459238] USB Mass Storage support registered.
680
[    2.559869] usb 2-1: new high-speed USB device number 2 using ehci-pci
681
[    2.599670] r8169 0000:04:00.0 eth0: link down
682
[    2.599699] r8169 0000:04:00.0 eth0: link down
683
[    2.599766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
684
[    2.693031] usb 2-1: New USB device found, idVendor=0572, idProduct=6831
685
[    2.693047] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
686
[    2.693056] usb 2-1: Product: S960
687
[    2.693065] usb 2-1: Manufacturer: Bestunar
688
[    2.693073] usb 2-1: SerialNumber: 20120511
689
[    3.214976] usb 5-4: new full-speed USB device number 2 using ohci_hcd
690
[    3.354770] usb 5-4: device descriptor read/64, error -62
691
[    3.456488] scsi 6:0:0:0: Direct-Access                               1.00 PQ: 0 ANSI: 6
692
[    3.458284] sd 6:0:0:0: Attached scsi generic sg0 type 0
693
[    3.460105] sd 6:0:0:0: [sda] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
694
[    3.460503] sd 6:0:0:0: [sda] Write Protect is off
695
[    3.460515] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
696
[    3.461063] sd 6:0:0:0: [sda] No Caching mode page present
697
[    3.461081] sd 6:0:0:0: [sda] Assuming drive cache: write through
698
[    3.464579] sd 6:0:0:0: [sda] No Caching mode page present
699
[    3.464596] sd 6:0:0:0: [sda] Assuming drive cache: write through
700
[    3.465919]  sda: sda1
701
[    3.468967] sd 6:0:0:0: [sda] No Caching mode page present
702
[    3.468976] sd 6:0:0:0: [sda] Assuming drive cache: write through
703
[    3.468983] sd 6:0:0:0: [sda] Attached SCSI removable disk
704
[    3.598193] usb 5-4: device descriptor read/64, error -62
705
[    3.838001] usb 5-4: new full-speed USB device number 3 using ohci_hcd
706
[    3.977849] usb 5-4: device descriptor read/64, error -62
707
[    4.221399] usb 5-4: device descriptor read/64, error -62
708
[    4.461025] usb 5-4: new full-speed USB device number 4 using ohci_hcd
709
[    4.868382] usb 5-4: device not accepting address 4, error -62
710
[    5.004248] usb 5-4: new full-speed USB device number 5 using ohci_hcd
711
[    5.411532] usb 5-4: device not accepting address 5, error -62
712
[    5.411603] hub 5-0:1.0: unable to enumerate USB device on port 4
713
[   14.950078] r8169 0000:04:00.0 eth0: link up
714
[   14.950107] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
715
[   15.532093] Loading iSCSI transport class v2.0-870.
716
[   15.534113] iscsi: registered transport (tcp)
717
[   16.789638] scsi7 : iSCSI Initiator over TCP/IP
718
[   17.051689] scsi 7:0:0:0: Direct-Access     MSFT     Virtual HD       6.3  PQ: 0 ANSI: 5
719
[   17.052045] sd 7:0:0:0: Attached scsi generic sg1 type 0
720
[   17.055236] sd 7:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
721
[   17.056741] sd 7:0:0:0: [sdb] Write Protect is off
722
[   17.056755] sd 7:0:0:0: [sdb] Mode Sense: 03 00 10 00
723
[   17.057117] sd 7:0:0:0: [sdb] Got wrong page
724
[   17.057123] sd 7:0:0:0: [sdb] Assuming drive cache: write through
725
[   17.062922] sd 7:0:0:0: [sdb] Got wrong page
726
[   17.062933] sd 7:0:0:0: [sdb] Assuming drive cache: write through
727
[   17.080567]  sdb: sdb1 sdb2 < sdb5 >
728
[   17.086806] sd 7:0:0:0: [sdb] Got wrong page
729
[   17.086825] sd 7:0:0:0: [sdb] Assuming drive cache: write through
730
[   17.087726] sd 7:0:0:0: [sdb] Attached SCSI disk
731
[   19.210144] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
732
[   19.210154] EXT4-fs (sdb1): write access will be enabled during recovery
733
[   19.743956] EXT4-fs (sdb1): orphan cleanup on readonly fs
734
[   19.743976] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 171
735
[   19.744113] EXT4-fs (sdb1): 1 orphan inode deleted
736
[   19.744117] EXT4-fs (sdb1): recovery complete
737
[   19.750981] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
738
[   29.678990] Adding 3895292k swap on /dev/sdb5.  Priority:-1 extents:1 across:3895292k 
739
[   29.798068] udevd[375]: starting version 175
740
[   29.918508] lp: driver loaded but no devices found
741
[   29.944910] snd_hda_intel 0000:00:01.1: irq 41 for MSI/MSI-X
742
[   29.967267] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
743
[   29.973397] [drm] Initialized drm 1.1.0 20060810
744
[   30.044051] [drm] radeon defaulting to kernel modesetting.
745
[   30.044061] [drm] radeon kernel modesetting enabled.
746
[   30.057723] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input3
747
[   30.058075] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
748
[   30.058288] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
749
[   30.058498] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
750
[   30.058705] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
751
[   30.058906] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
752
[   30.059138] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
753
[   30.060401] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1849:0x9802).
754
[   30.060471] [drm] register mmio base: 0xFEB00000
755
[   30.060474] [drm] register mmio size: 262144
756
[   30.060587] ATOM BIOS: AMD
757
[   30.060648] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
758
[   30.060654] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
759
[   30.060951] [drm] Detected VRAM RAM=256M, BAR=256M
760
[   30.060959] [drm] RAM width 32bits DDR
761
[   30.062650] [TTM] Zone  kernel: Available graphics memory: 1877666 kiB
762
[   30.062657] [TTM] Initializing pool allocator
763
[   30.062674] [TTM] Initializing DMA pool allocator
764
[   30.062727] [drm] radeon: 256M of VRAM memory ready
765
[   30.062731] [drm] radeon: 512M of GTT memory ready.
766
[   30.062769] [drm] GART: num cpu pages 131072, num gpu pages 131072
767
[   30.065982] [drm] Loading PALM Microcode
768
[   30.080473] WARNING: You are using an experimental version of the media stack.
769
[   30.080473] 	As the driver is backported to an older kernel, it doesn't offer
770
[   30.080473] 	enough quality for its usage in production.
771
[   30.080473] 	Use it with care.
772
[   30.080473] Latest git patches (needed if you report a bug to [email protected]):
773
[   30.080473] 	a32f7d1ad3744914273c6907204c2ab3b5d496a0 Merge branch 'v4l_for_linus' into staging/for_v3.9
774
[   30.080473] 	6b9e50c463efc5c361496ae6a895cc966ff8025b [media] stv090x: On STV0903 do not set registers of the second path
775
[   30.080473] 	f67102c49a123b32a4469b28407feb52b37144f5 [media] mb86a20s: remove global BER/PER counters if per-layer counters vanish
776
[   30.086927] WARNING: You are using an experimental version of the media stack.
777
[   30.086927] 	As the driver is backported to an older kernel, it doesn't offer
778
[   30.086927] 	enough quality for its usage in production.
779
[   30.086927] 	Use it with care.
780
[   30.086927] Latest git patches (needed if you report a bug to [email protected]):
781
[   30.086927] 	a32f7d1ad3744914273c6907204c2ab3b5d496a0 Merge branch 'v4l_for_linus' into staging/for_v3.9
782
[   30.086927] 	6b9e50c463efc5c361496ae6a895cc966ff8025b [media] stv090x: On STV0903 do not set registers of the second path
783
[   30.086927] 	f67102c49a123b32a4469b28407feb52b37144f5 [media] mb86a20s: remove global BER/PER counters if per-layer counters vanish
784
[   30.093059] usb 1-2: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
785
[   30.093155] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
786
[   30.093188] DVB: registering new adapter (DVBSky S960/S860)
787
[   30.093793] usb 2-1: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
788
[   30.093870] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
789
[   30.093902] DVB: registering new adapter (DVBSky S960/S860)
790
[   30.094373] usbcore: registered new interface driver dvb_usb_dvbsky
791
[   30.094476] dvbsky_usb MAC address=00:17:42:54:96:0c
792
[   30.094484] usb 1-2: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
793
[   30.095223] dvbsky_usb MAC address=00:17:42:54:96:0c
794
[   30.095232] usb 2-1: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
795
[   30.096050] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
796
[   30.098734] media: Linux media interface: v0.10
797
[   30.104373] Linux video capture interface: v2.00
798
[   30.104385] WARNING: You are using an experimental version of the media stack.
799
[   30.104385] 	As the driver is backported to an older kernel, it doesn't offer
800
[   30.104385] 	enough quality for its usage in production.
801
[   30.104385] 	Use it with care.
802
[   30.104385] Latest git patches (needed if you report a bug to [email protected]):
803
[   30.104385] 	a32f7d1ad3744914273c6907204c2ab3b5d496a0 Merge branch 'v4l_for_linus' into staging/for_v3.9
804
[   30.104385] 	6b9e50c463efc5c361496ae6a895cc966ff8025b [media] stv090x: On STV0903 do not set registers of the second path
805
[   30.104385] 	f67102c49a123b32a4469b28407feb52b37144f5 [media] mb86a20s: remove global BER/PER counters if per-layer counters vanish
806
[   30.114862] em28xx: New device TerraTec Electronic GmbH TerraTec H5 @ 480 Mbps (0ccd:10ad, interface 0, class 0)
807
[   30.114871] em28xx: Audio interface 0 found (Vendor Class)
808
[   30.114875] em28xx: Video interface 0 found: isoc
809
[   30.114878] em28xx: DVB interface 0 found: isoc
810
[   30.115072] em28xx: chip ID is em2884
811
[   30.117307] acpi device:17: registered as cooling_device2
812
[   30.117357] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
813
[   30.117503] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
814
[   30.140838] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
815
[   30.141090] radeon 0000:00:01.0: WB enabled
816
[   30.141098] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880136196c00
817
[   30.141104] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880136196c0c
818
[   30.141109] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
819
[   30.141112] [drm] Driver supports precise vblank timestamp query.
820
[   30.141171] radeon 0000:00:01.0: irq 42 for MSI/MSI-X
821
[   30.141197] radeon 0000:00:01.0: radeon: using MSI.
822
[   30.141250] [drm] radeon: irq initialized.
823
[   30.159413] [drm] ring test on 0 succeeded in 1 usecs
824
[   30.159482] [drm] ring test on 3 succeeded in 1 usecs
825
[   30.160720] [drm] ib test on ring 0 succeeded in 0 usecs
826
[   30.160769] [drm] ib test on ring 3 succeeded in 0 usecs
827
[   30.167339] [drm] Radeon Display Connectors
828
[   30.167347] [drm] Connector 0:
829
[   30.167350] [drm]   HDMI-A-1
830
[   30.167352] [drm]   HPD1
831
[   30.167357] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
832
[   30.167360] [drm]   Encoders:
833
[   30.167362] [drm]     DFP1: INTERNAL_UNIPHY
834
[   30.167365] [drm] Connector 1:
835
[   30.167367] [drm]   HDMI-A-2
836
[   30.167369] [drm]   HPD2
837
[   30.167373] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
838
[   30.167375] [drm]   Encoders:
839
[   30.167377] [drm]     DFP2: INTERNAL_UNIPHY
840
[   30.167379] [drm] Connector 2:
841
[   30.167382] [drm]   VGA-1
842
[   30.167385] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
843
[   30.167387] [drm]   Encoders:
844
[   30.167390] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
845
[   30.167474] [drm] Internal thermal controller without fan control
846
[   30.170596] em2884 #0: Identified as Terratec Cinergy H5 (card=79)
847
[   30.170721] [drm] radeon: power management initialized
848
[   30.170890] em2884 #0: Config register raw data: 0x84
849
[   30.170901] em2884 #0: v4l2 driver version 0.1.3
850
[   30.175829] em2884 #0: V4L2 video device registered as video0
851
[   30.175838] em2884 #0: analog set to isoc mode.
852
[   30.175841] em2884 #0: dvb set to isoc mode.
853
[   30.176788] usbcore: registered new interface driver em28xx
854
[   30.181538] DS3000 chip version: d0 attached.
855
[   30.182699] DS3000 chip version: d0 attached.
856
[   30.183075] TS202x chip version[1]: c1 attached.
857
[   30.183816] TS202x chip version[1]: c1 attached.
858
[   30.193703] TS202x chip version[2]: c3 attached.
859
[   30.198423] TS202x chip version[2]: c3 attached.
860
[   30.224980] radeon 0000:00:01.0: No connectors reported connected with modes
861
[   30.224994] [drm] Cannot find any crtc or sizes - going 1024x768
862
[   30.226805] [drm] fb mappable at 0xC0142000
863
[   30.226809] [drm] vram apper at 0xC0000000
864
[   30.226812] [drm] size 3145728
865
[   30.226814] [drm] fb depth is 24
866
[   30.226817] [drm]    pitch is 4096
867
[   30.227165] fbcon: radeondrmfb (fb0) is primary device
868
[   30.235319] Console: switching to colour frame buffer device 128x48
869
[   30.240123] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
870
[   30.240128] radeon 0000:00:01.0: registered panic notifier
871
[   30.244197] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
872
[   30.246255] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
873
[   30.253213] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
874
[   30.254507] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
875
[   30.254620] sp5100_tco: PCI Revision ID: 0x42
876
[   30.254672] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
877
[   30.254705] sp5100_tco: Last reboot was not triggered by watchdog.
878
[   30.256785] sp5100_tco: initialized (0xffffc900108fcb00). heartbeat=60 sec (nowayout=0)
879
[   30.257992] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
880
[   30.259636] m88ds3103_load_firmware: Waiting for firmware upload(2)...
881
[   30.259828] m88ds3103_load_firmware: Waiting for firmware upload(2)...
882
[   30.347889] type=1400 audit(1382008194.326:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
883
[   30.348718] type=1400 audit(1382008194.330:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
884
[   30.349149] type=1400 audit(1382008194.330:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
885
[   30.463223] microcode: CPU0: patch_level=0x0500010d
886
[   30.476946] microcode: CPU1: patch_level=0x0500010d
887
[   30.477147] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
888
[   30.519729] kvm: Nested Virtualization enabled
889
[   30.519740] kvm: Nested Paging enabled
890
[   30.570209] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
891
[   30.830103] drxk: status = 0x639260d9
892
[   30.830113] drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
893
[   30.924630] FS-Cache: Loaded
894
[   30.942908] RPC: Registered named UNIX socket transport module.
895
[   30.942916] RPC: Registered udp transport module.
896
[   30.942919] RPC: Registered tcp transport module.
897
[   30.942922] RPC: Registered tcp NFSv4.1 backchannel transport module.
898
[   30.951495] FS-Cache: Netfs 'nfs' registered for caching
899
[   30.977216] Installing knfsd (copyright (C) 1996 [email protected]).
900
[   31.273388] init: idmapd-mounting (/mnt/nfs/recordedtv) main process (569) killed by TERM signal
901
[   31.361963] usb 1-2: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)...
902
[   31.373816] usb 2-1: DVB: registering adapter 1 frontend 0 (Montage DS3103/TS2022)...
903
[   31.383473] init: failsafe main process (685) killed by TERM signal
904
[   31.406916] Registered IR keymap rc-dvbsky
905
[   31.407093] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0/input11
906
[   31.409707] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0
907
[   31.409722] usb 1-2: dvb_usb_v2: schedule remote query interval to 300 msecs
908
[   31.409731] usb 1-2: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
909
[   31.434621] Registered IR keymap rc-dvbsky
910
[   31.434800] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc1/input12
911
[   31.437354] rc1: DVBSky S960/S860 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc1
912
[   31.437369] usb 2-1: dvb_usb_v2: schedule remote query interval to 300 msecs
913
[   31.437378] usb 2-1: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
914
[   31.610092] init: statd-mounting (/mnt/nfs/recordedtv) main process (571) killed by TERM signal
915
[   31.639932] NFS: Registering the id_resolver key type
916
[   31.639963] Key type id_resolver registered
917
[   31.639967] Key type id_legacy registered
918
[   31.742580] type=1400 audit(1382008195.726:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=808 comm="apparmor_parser"
919
[   31.752823] type=1400 audit(1382008195.734:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
920
[   31.753253] type=1400 audit(1382008195.734:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
921
[   31.757825] type=1400 audit(1382008195.738:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=810 comm="apparmor_parser"
922
[   32.001011] iscsi: registered transport (iser)
923
[   32.256439] DRXK driver version 0.9.4300
924
[   32.271537] drxk: frontend initialized.
925
[   34.315445] DVB: registering new adapter (em2884 #0)
926
[   34.315472] usb 1-3: DVB: registering adapter 2 frontend 0 (DRXK DVB-C DVB-T)...
927
[   34.320675] em2884 #0: Successfully loaded em28xx-dvb
928
[   34.320694] Em28xx: Initialized (Em28xx dvb Extension) extension
929
[ 4059.760008] usb 2-1: USB disconnect, device number 2
930
[ 4059.776253] usb 2-1: dvb_usb_v2: usb_bulk_msg() failed=-19
931
[ 4059.776445] usb 2-1: dvb_usb_v2: usb_bulk_msg() failed=-19
932
[ 4059.776557] m88ds3103_readreg: reg=0xa2 (error=-19)
933
[ 4059.776666] usb 2-1: dvb_usb_v2: usb_bulk_msg() failed=-19
934
[ 4059.776782] m88ds3103_writereg: writereg error(err == -19, reg == 0xa2, value == 0xec)
935
[ 4194.644713] INFO: task khubd:25 blocked for more than 120 seconds.
936
[ 4194.644854] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
937
[ 4194.644999] khubd           D ffff88013ed13f40     0    25      2 0x00000000
938
[ 4194.645013]  ffff88013883d758 0000000000000046 ffff880138840000 ffff88013883dfd8
939
[ 4194.645026]  ffff88013883dfd8 ffff88013883dfd8 ffff88012b86dd00 ffff880138840000
940
[ 4194.645037]  7fffffffffffffff ffff88012ed91f10 ffff88012ed91f18 ffff880138840000
941
[ 4194.645048] Call Trace:
942
[ 4194.645071]  [<ffffffff816cbfc9>] schedule+0x29/0x70
943
[ 4194.645084]  [<ffffffff816ca43c>] schedule_timeout+0x1ec/0x2b0
944
[ 4194.645096]  [<ffffffff810964db>] ? check_preempt_wakeup+0x15b/0x280
945
[ 4194.645109]  [<ffffffff8108cc05>] ? check_preempt_curr+0x85/0xa0
946
[ 4194.645121]  [<ffffffff816cbdf7>] wait_for_common+0xd7/0x180
947
[ 4194.645133]  [<ffffffff8108f4a0>] ? try_to_wake_up+0x2a0/0x2a0
948
[ 4194.645145]  [<ffffffff816cbf9d>] wait_for_completion+0x1d/0x20
949
[ 4194.645155]  [<ffffffff8107d5fb>] kthread_stop+0x5b/0xf0
950
[ 4194.645202]  [<ffffffffa02b70b9>] dvb_frontend_stop.isra.4+0x39/0xa0 [dvb_core]
951
[ 4194.645224]  [<ffffffffa02b715b>] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
952
[ 4194.645242]  [<ffffffffa02a208f>] ? rc_free_device+0x3f/0x50 [rc_core]
953
[ 4194.645258]  [<ffffffffa02d610b>] dvb_usbv2_disconnect+0x10b/0x210 [dvb_usb_v2]
954
[ 4194.645276]  [<ffffffff814616b0>] ? rpm_suspend+0x680/0x680
955
[ 4194.645287]  [<ffffffff81461e50>] ? pm_schedule_suspend+0xe0/0xe0
956
[ 4194.645303]  [<ffffffff81501670>] usb_unbind_interface+0x60/0x1b0
957
[ 4194.645316]  [<ffffffff81455f5c>] __device_release_driver+0x7c/0xe0
958
[ 4194.645326]  [<ffffffff814561cc>] device_release_driver+0x2c/0x40
959
[ 4194.645337]  [<ffffffff814559e9>] bus_remove_device+0xd9/0x110
960
[ 4194.645347]  [<ffffffff8145310a>] device_del+0x11a/0x1b0
961
[ 4194.645357]  [<ffffffff814ff17f>] usb_disable_device+0xaf/0x200
962
[ 4194.645368]  [<ffffffff814f6958>] usb_disconnect+0xa8/0x1c0
963
[ 4194.645379]  [<ffffffff814f7d63>] hub_port_connect_change+0xc3/0x9f0
964
[ 4194.645389]  [<ffffffff814fe672>] ? usb_control_msg+0xf2/0x140
965
[ 4194.645400]  [<ffffffff814f88d5>] hub_events+0x245/0x700
966
[ 4194.645410]  [<ffffffff814f8dc5>] hub_thread+0x35/0x1a0
967
[ 4194.645420]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
968
[ 4194.645430]  [<ffffffff814f8d90>] ? hub_events+0x700/0x700
969
[ 4194.645439]  [<ffffffff8107d590>] kthread+0xc0/0xd0
970
[ 4194.645449]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
971
[ 4194.645459]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
972
[ 4194.645468]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
973
[ 4194.645542] INFO: task kdvb-ad-1-fe-0:1471 blocked for more than 120 seconds.
974
[ 4194.645674] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
975
[ 4194.645816] kdvb-ad-1-fe-0  D ffff88013ed13f40     0  1471      2 0x00000000
976
[ 4194.645826]  ffff88012ed91d70 0000000000000046 ffff88012b86dd00 ffff88012ed91fd8
977
[ 4194.645837]  ffff88012ed91fd8 ffff88012ed91fd8 ffff88012b91ae80 ffff88012b86dd00
978
[ 4194.645848]  ffff880136e18a30 ffff88012b86dd00 ffff880136e18a34 00000000ffffffff
979
[ 4194.645858] Call Trace:
980
[ 4194.645872]  [<ffffffff816cbfc9>] schedule+0x29/0x70
981
[ 4194.645883]  [<ffffffff816cc27e>] schedule_preempt_disabled+0xe/0x10
982
[ 4194.645894]  [<ffffffff816cad87>] __mutex_lock_slowpath+0xd7/0x150
983
[ 4194.645904]  [<ffffffff815440e5>] ? i2c_unlock_adapter+0x25/0x40
984
[ 4194.645915]  [<ffffffff816ca85a>] mutex_lock+0x2a/0x50
985
[ 4194.645932]  [<ffffffffa02d669c>] dvb_usb_fe_sleep+0xcc/0xe0 [dvb_usb_v2]
986
[ 4194.645947]  [<ffffffffa034a548>] ? m88ds3103_set_voltage+0x78/0x130 [m88ds3103]
987
[ 4194.645969]  [<ffffffffa02b887c>] dvb_frontend_thread+0x28c/0x5a0 [dvb_core]
988
[ 4194.645979]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
989
[ 4194.646001]  [<ffffffffa02b85f0>] ? dvb_register_frontend+0x190/0x190 [dvb_core]
990
[ 4194.646010]  [<ffffffff8107d590>] kthread+0xc0/0xd0
991
[ 4194.646020]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
992
[ 4194.646029]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
993
[ 4194.646039]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
994
[ 4314.457126] INFO: task khubd:25 blocked for more than 120 seconds.
995
[ 4314.457286] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
996
[ 4314.457432] khubd           D ffff88013ed13f40     0    25      2 0x00000000
997
[ 4314.457446]  ffff88013883d758 0000000000000046 ffff880138840000 ffff88013883dfd8
998
[ 4314.457459]  ffff88013883dfd8 ffff88013883dfd8 ffff88012b86dd00 ffff880138840000
999
[ 4314.457471]  7fffffffffffffff ffff88012ed91f10 ffff88012ed91f18 ffff880138840000
1000
[ 4314.457482] Call Trace:
1001
[ 4314.457505]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1002
[ 4314.457518]  [<ffffffff816ca43c>] schedule_timeout+0x1ec/0x2b0
1003
[ 4314.457530]  [<ffffffff810964db>] ? check_preempt_wakeup+0x15b/0x280
1004
[ 4314.457543]  [<ffffffff8108cc05>] ? check_preempt_curr+0x85/0xa0
1005
[ 4314.457554]  [<ffffffff816cbdf7>] wait_for_common+0xd7/0x180
1006
[ 4314.457566]  [<ffffffff8108f4a0>] ? try_to_wake_up+0x2a0/0x2a0
1007
[ 4314.457693]  [<ffffffff816cbf9d>] wait_for_completion+0x1d/0x20
1008
[ 4314.457703]  [<ffffffff8107d5fb>] kthread_stop+0x5b/0xf0
1009
[ 4314.457747]  [<ffffffffa02b70b9>] dvb_frontend_stop.isra.4+0x39/0xa0 [dvb_core]
1010
[ 4314.457769]  [<ffffffffa02b715b>] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
1011
[ 4314.457787]  [<ffffffffa02a208f>] ? rc_free_device+0x3f/0x50 [rc_core]
1012
[ 4314.457803]  [<ffffffffa02d610b>] dvb_usbv2_disconnect+0x10b/0x210 [dvb_usb_v2]
1013
[ 4314.457820]  [<ffffffff814616b0>] ? rpm_suspend+0x680/0x680
1014
[ 4314.457831]  [<ffffffff81461e50>] ? pm_schedule_suspend+0xe0/0xe0
1015
[ 4314.457846]  [<ffffffff81501670>] usb_unbind_interface+0x60/0x1b0
1016
[ 4314.457860]  [<ffffffff81455f5c>] __device_release_driver+0x7c/0xe0
1017
[ 4314.457870]  [<ffffffff814561cc>] device_release_driver+0x2c/0x40
1018
[ 4314.457880]  [<ffffffff814559e9>] bus_remove_device+0xd9/0x110
1019
[ 4314.457890]  [<ffffffff8145310a>] device_del+0x11a/0x1b0
1020
[ 4314.457900]  [<ffffffff814ff17f>] usb_disable_device+0xaf/0x200
1021
[ 4314.457911]  [<ffffffff814f6958>] usb_disconnect+0xa8/0x1c0
1022
[ 4314.457921]  [<ffffffff814f7d63>] hub_port_connect_change+0xc3/0x9f0
1023
[ 4314.457931]  [<ffffffff814fe672>] ? usb_control_msg+0xf2/0x140
1024
[ 4314.457941]  [<ffffffff814f88d5>] hub_events+0x245/0x700
1025
[ 4314.457952]  [<ffffffff814f8dc5>] hub_thread+0x35/0x1a0
1026
[ 4314.457962]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1027
[ 4314.457972]  [<ffffffff814f8d90>] ? hub_events+0x700/0x700
1028
[ 4314.457980]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1029
[ 4314.457990]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1030
[ 4314.458000]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1031
[ 4314.458009]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1032
[ 4314.458102] INFO: task kdvb-ad-1-fe-0:1471 blocked for more than 120 seconds.
1033
[ 4314.458235] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1034
[ 4314.458377] kdvb-ad-1-fe-0  D ffff88013ed13f40     0  1471      2 0x00000000
1035
[ 4314.458387]  ffff88012ed91d70 0000000000000046 ffff88012b86dd00 ffff88012ed91fd8
1036
[ 4314.458398]  ffff88012ed91fd8 ffff88012ed91fd8 ffff88012b91ae80 ffff88012b86dd00
1037
[ 4314.458409]  ffff880136e18a30 ffff88012b86dd00 ffff880136e18a34 00000000ffffffff
1038
[ 4314.458420] Call Trace:
1039
[ 4314.458434]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1040
[ 4314.458445]  [<ffffffff816cc27e>] schedule_preempt_disabled+0xe/0x10
1041
[ 4314.458456]  [<ffffffff816cad87>] __mutex_lock_slowpath+0xd7/0x150
1042
[ 4314.458466]  [<ffffffff815440e5>] ? i2c_unlock_adapter+0x25/0x40
1043
[ 4314.458477]  [<ffffffff816ca85a>] mutex_lock+0x2a/0x50
1044
[ 4314.458494]  [<ffffffffa02d669c>] dvb_usb_fe_sleep+0xcc/0xe0 [dvb_usb_v2]
1045
[ 4314.458508]  [<ffffffffa034a548>] ? m88ds3103_set_voltage+0x78/0x130 [m88ds3103]
1046
[ 4314.458530]  [<ffffffffa02b887c>] dvb_frontend_thread+0x28c/0x5a0 [dvb_core]
1047
[ 4314.458540]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1048
[ 4314.458561]  [<ffffffffa02b85f0>] ? dvb_register_frontend+0x190/0x190 [dvb_core]
1049
[ 4314.458570]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1050
[ 4314.458580]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1051
[ 4314.458589]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1052
[ 4314.458599]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1053
[ 4434.269534] INFO: task khubd:25 blocked for more than 120 seconds.
1054
[ 4434.269675] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1055
[ 4434.269819] khubd           D ffff88013ed13f40     0    25      2 0x00000000
1056
[ 4434.269832]  ffff88013883d758 0000000000000046 ffff880138840000 ffff88013883dfd8
1057
[ 4434.269846]  ffff88013883dfd8 ffff88013883dfd8 ffff88012b86dd00 ffff880138840000
1058
[ 4434.269857]  7fffffffffffffff ffff88012ed91f10 ffff88012ed91f18 ffff880138840000
1059
[ 4434.269868] Call Trace:
1060
[ 4434.269891]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1061
[ 4434.269904]  [<ffffffff816ca43c>] schedule_timeout+0x1ec/0x2b0
1062
[ 4434.269917]  [<ffffffff810964db>] ? check_preempt_wakeup+0x15b/0x280
1063
[ 4434.269929]  [<ffffffff8108cc05>] ? check_preempt_curr+0x85/0xa0
1064
[ 4434.269941]  [<ffffffff816cbdf7>] wait_for_common+0xd7/0x180
1065
[ 4434.269953]  [<ffffffff8108f4a0>] ? try_to_wake_up+0x2a0/0x2a0
1066
[ 4434.269964]  [<ffffffff816cbf9d>] wait_for_completion+0x1d/0x20
1067
[ 4434.269975]  [<ffffffff8107d5fb>] kthread_stop+0x5b/0xf0
1068
[ 4434.270020]  [<ffffffffa02b70b9>] dvb_frontend_stop.isra.4+0x39/0xa0 [dvb_core]
1069
[ 4434.270042]  [<ffffffffa02b715b>] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
1070
[ 4434.270060]  [<ffffffffa02a208f>] ? rc_free_device+0x3f/0x50 [rc_core]
1071
[ 4434.270077]  [<ffffffffa02d610b>] dvb_usbv2_disconnect+0x10b/0x210 [dvb_usb_v2]
1072
[ 4434.270095]  [<ffffffff814616b0>] ? rpm_suspend+0x680/0x680
1073
[ 4434.270106]  [<ffffffff81461e50>] ? pm_schedule_suspend+0xe0/0xe0
1074
[ 4434.270122]  [<ffffffff81501670>] usb_unbind_interface+0x60/0x1b0
1075
[ 4434.270135]  [<ffffffff81455f5c>] __device_release_driver+0x7c/0xe0
1076
[ 4434.270146]  [<ffffffff814561cc>] device_release_driver+0x2c/0x40
1077
[ 4434.270156]  [<ffffffff814559e9>] bus_remove_device+0xd9/0x110
1078
[ 4434.270166]  [<ffffffff8145310a>] device_del+0x11a/0x1b0
1079
[ 4434.270176]  [<ffffffff814ff17f>] usb_disable_device+0xaf/0x200
1080
[ 4434.270187]  [<ffffffff814f6958>] usb_disconnect+0xa8/0x1c0
1081
[ 4434.270197]  [<ffffffff814f7d63>] hub_port_connect_change+0xc3/0x9f0
1082
[ 4434.270206]  [<ffffffff814fe672>] ? usb_control_msg+0xf2/0x140
1083
[ 4434.270218]  [<ffffffff814f88d5>] hub_events+0x245/0x700
1084
[ 4434.270228]  [<ffffffff814f8dc5>] hub_thread+0x35/0x1a0
1085
[ 4434.270238]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1086
[ 4434.270248]  [<ffffffff814f8d90>] ? hub_events+0x700/0x700
1087
[ 4434.270257]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1088
[ 4434.270266]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1089
[ 4434.270276]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1090
[ 4434.270285]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1091
[ 4434.270359] INFO: task kdvb-ad-1-fe-0:1471 blocked for more than 120 seconds.
1092
[ 4434.270490] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1093
[ 4434.270633] kdvb-ad-1-fe-0  D ffff88013ed13f40     0  1471      2 0x00000000
1094
[ 4434.270643]  ffff88012ed91d70 0000000000000046 ffff88012b86dd00 ffff88012ed91fd8
1095
[ 4434.270654]  ffff88012ed91fd8 ffff88012ed91fd8 ffff88012b91ae80 ffff88012b86dd00
1096
[ 4434.270665]  ffff880136e18a30 ffff88012b86dd00 ffff880136e18a34 00000000ffffffff
1097
[ 4434.270676] Call Trace:
1098
[ 4434.270689]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1099
[ 4434.270700]  [<ffffffff816cc27e>] schedule_preempt_disabled+0xe/0x10
1100
[ 4434.270711]  [<ffffffff816cad87>] __mutex_lock_slowpath+0xd7/0x150
1101
[ 4434.270722]  [<ffffffff815440e5>] ? i2c_unlock_adapter+0x25/0x40
1102
[ 4434.270733]  [<ffffffff816ca85a>] mutex_lock+0x2a/0x50
1103
[ 4434.270750]  [<ffffffffa02d669c>] dvb_usb_fe_sleep+0xcc/0xe0 [dvb_usb_v2]
1104
[ 4434.270765]  [<ffffffffa034a548>] ? m88ds3103_set_voltage+0x78/0x130 [m88ds3103]
1105
[ 4434.270786]  [<ffffffffa02b887c>] dvb_frontend_thread+0x28c/0x5a0 [dvb_core]
1106
[ 4434.270796]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1107
[ 4434.270817]  [<ffffffffa02b85f0>] ? dvb_register_frontend+0x190/0x190 [dvb_core]
1108
[ 4434.270826]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1109
[ 4434.270836]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1110
[ 4434.270846]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1111
[ 4434.270856]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1112
[ 4554.081978] INFO: task khubd:25 blocked for more than 120 seconds.
1113
[ 4554.082118] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1114
[ 4554.082262] khubd           D ffff88013ed13f40     0    25      2 0x00000000
1115
[ 4554.082276]  ffff88013883d758 0000000000000046 ffff880138840000 ffff88013883dfd8
1116
[ 4554.082289]  ffff88013883dfd8 ffff88013883dfd8 ffff88012b86dd00 ffff880138840000
1117
[ 4554.082300]  7fffffffffffffff ffff88012ed91f10 ffff88012ed91f18 ffff880138840000
1118
[ 4554.082312] Call Trace:
1119
[ 4554.082334]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1120
[ 4554.082347]  [<ffffffff816ca43c>] schedule_timeout+0x1ec/0x2b0
1121
[ 4554.082360]  [<ffffffff810964db>] ? check_preempt_wakeup+0x15b/0x280
1122
[ 4554.082372]  [<ffffffff8108cc05>] ? check_preempt_curr+0x85/0xa0
1123
[ 4554.082384]  [<ffffffff816cbdf7>] wait_for_common+0xd7/0x180
1124
[ 4554.082396]  [<ffffffff8108f4a0>] ? try_to_wake_up+0x2a0/0x2a0
1125
[ 4554.082407]  [<ffffffff816cbf9d>] wait_for_completion+0x1d/0x20
1126
[ 4554.082417]  [<ffffffff8107d5fb>] kthread_stop+0x5b/0xf0
1127
[ 4554.082461]  [<ffffffffa02b70b9>] dvb_frontend_stop.isra.4+0x39/0xa0 [dvb_core]
1128
[ 4554.082483]  [<ffffffffa02b715b>] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
1129
[ 4554.082500]  [<ffffffffa02a208f>] ? rc_free_device+0x3f/0x50 [rc_core]
1130
[ 4554.082516]  [<ffffffffa02d610b>] dvb_usbv2_disconnect+0x10b/0x210 [dvb_usb_v2]
1131
[ 4554.082533]  [<ffffffff814616b0>] ? rpm_suspend+0x680/0x680
1132
[ 4554.082544]  [<ffffffff81461e50>] ? pm_schedule_suspend+0xe0/0xe0
1133
[ 4554.082559]  [<ffffffff81501670>] usb_unbind_interface+0x60/0x1b0
1134
[ 4554.082699]  [<ffffffff81455f5c>] __device_release_driver+0x7c/0xe0
1135
[ 4554.082710]  [<ffffffff814561cc>] device_release_driver+0x2c/0x40
1136
[ 4554.082720]  [<ffffffff814559e9>] bus_remove_device+0xd9/0x110
1137
[ 4554.082730]  [<ffffffff8145310a>] device_del+0x11a/0x1b0
1138
[ 4554.082739]  [<ffffffff814ff17f>] usb_disable_device+0xaf/0x200
1139
[ 4554.082750]  [<ffffffff814f6958>] usb_disconnect+0xa8/0x1c0
1140
[ 4554.082761]  [<ffffffff814f7d63>] hub_port_connect_change+0xc3/0x9f0
1141
[ 4554.082770]  [<ffffffff814fe672>] ? usb_control_msg+0xf2/0x140
1142
[ 4554.082781]  [<ffffffff814f88d5>] hub_events+0x245/0x700
1143
[ 4554.082791]  [<ffffffff814f8dc5>] hub_thread+0x35/0x1a0
1144
[ 4554.082801]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1145
[ 4554.082811]  [<ffffffff814f8d90>] ? hub_events+0x700/0x700
1146
[ 4554.082820]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1147
[ 4554.082829]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1148
[ 4554.082839]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1149
[ 4554.082849]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1150
[ 4554.082922] INFO: task kdvb-ad-1-fe-0:1471 blocked for more than 120 seconds.
1151
[ 4554.083055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1152
[ 4554.083197] kdvb-ad-1-fe-0  D ffff88013ed13f40     0  1471      2 0x00000000
1153
[ 4554.083207]  ffff88012ed91d70 0000000000000046 ffff88012b86dd00 ffff88012ed91fd8
1154
[ 4554.083219]  ffff88012ed91fd8 ffff88012ed91fd8 ffff88012b91ae80 ffff88012b86dd00
1155
[ 4554.083229]  ffff880136e18a30 ffff88012b86dd00 ffff880136e18a34 00000000ffffffff
1156
[ 4554.083240] Call Trace:
1157
[ 4554.083253]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1158
[ 4554.083265]  [<ffffffff816cc27e>] schedule_preempt_disabled+0xe/0x10
1159
[ 4554.083276]  [<ffffffff816cad87>] __mutex_lock_slowpath+0xd7/0x150
1160
[ 4554.083286]  [<ffffffff815440e5>] ? i2c_unlock_adapter+0x25/0x40
1161
[ 4554.083297]  [<ffffffff816ca85a>] mutex_lock+0x2a/0x50
1162
[ 4554.083315]  [<ffffffffa02d669c>] dvb_usb_fe_sleep+0xcc/0xe0 [dvb_usb_v2]
1163
[ 4554.083329]  [<ffffffffa034a548>] ? m88ds3103_set_voltage+0x78/0x130 [m88ds3103]
1164
[ 4554.083351]  [<ffffffffa02b887c>] dvb_frontend_thread+0x28c/0x5a0 [dvb_core]
1165
[ 4554.083361]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1166
[ 4554.083382]  [<ffffffffa02b85f0>] ? dvb_register_frontend+0x190/0x190 [dvb_core]
1167
[ 4554.083391]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1168
[ 4554.083401]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1169
[ 4554.083410]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1170
[ 4554.083419]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1171
[ 4673.894395] INFO: task khubd:25 blocked for more than 120 seconds.
1172
[ 4673.894533] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1173
[ 4673.894674] khubd           D ffff88013ed13f40     0    25      2 0x00000000
1174
[ 4673.894688]  ffff88013883d758 0000000000000046 ffff880138840000 ffff88013883dfd8
1175
[ 4673.894701]  ffff88013883dfd8 ffff88013883dfd8 ffff88012b86dd00 ffff880138840000
1176
[ 4673.894712]  7fffffffffffffff ffff88012ed91f10 ffff88012ed91f18 ffff880138840000
1177
[ 4673.894724] Call Trace:
1178
[ 4673.894746]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1179
[ 4673.894759]  [<ffffffff816ca43c>] schedule_timeout+0x1ec/0x2b0
1180
[ 4673.894772]  [<ffffffff810964db>] ? check_preempt_wakeup+0x15b/0x280
1181
[ 4673.894784]  [<ffffffff8108cc05>] ? check_preempt_curr+0x85/0xa0
1182
[ 4673.894795]  [<ffffffff816cbdf7>] wait_for_common+0xd7/0x180
1183
[ 4673.894807]  [<ffffffff8108f4a0>] ? try_to_wake_up+0x2a0/0x2a0
1184
[ 4673.894819]  [<ffffffff816cbf9d>] wait_for_completion+0x1d/0x20
1185
[ 4673.894829]  [<ffffffff8107d5fb>] kthread_stop+0x5b/0xf0
1186
[ 4673.894875]  [<ffffffffa02b70b9>] dvb_frontend_stop.isra.4+0x39/0xa0 [dvb_core]
1187
[ 4673.894898]  [<ffffffffa02b715b>] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
1188
[ 4673.894916]  [<ffffffffa02a208f>] ? rc_free_device+0x3f/0x50 [rc_core]
1189
[ 4673.894932]  [<ffffffffa02d610b>] dvb_usbv2_disconnect+0x10b/0x210 [dvb_usb_v2]
1190
[ 4673.894950]  [<ffffffff814616b0>] ? rpm_suspend+0x680/0x680
1191
[ 4673.894961]  [<ffffffff81461e50>] ? pm_schedule_suspend+0xe0/0xe0
1192
[ 4673.894978]  [<ffffffff81501670>] usb_unbind_interface+0x60/0x1b0
1193
[ 4673.894992]  [<ffffffff81455f5c>] __device_release_driver+0x7c/0xe0
1194
[ 4673.895002]  [<ffffffff814561cc>] device_release_driver+0x2c/0x40
1195
[ 4673.895013]  [<ffffffff814559e9>] bus_remove_device+0xd9/0x110
1196
[ 4673.895023]  [<ffffffff8145310a>] device_del+0x11a/0x1b0
1197
[ 4673.895033]  [<ffffffff814ff17f>] usb_disable_device+0xaf/0x200
1198
[ 4673.895044]  [<ffffffff814f6958>] usb_disconnect+0xa8/0x1c0
1199
[ 4673.895055]  [<ffffffff814f7d63>] hub_port_connect_change+0xc3/0x9f0
1200
[ 4673.895064]  [<ffffffff814fe672>] ? usb_control_msg+0xf2/0x140
1201
[ 4673.895075]  [<ffffffff814f88d5>] hub_events+0x245/0x700
1202
[ 4673.895085]  [<ffffffff814f8dc5>] hub_thread+0x35/0x1a0
1203
[ 4673.895095]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1204
[ 4673.895105]  [<ffffffff814f8d90>] ? hub_events+0x700/0x700
1205
[ 4673.895114]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1206
[ 4673.895124]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1207
[ 4673.895134]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1208
[ 4673.895143]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1209
[ 4673.895218] INFO: task kdvb-ad-1-fe-0:1471 blocked for more than 120 seconds.
1210
[ 4673.895346] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
1211
[ 4673.895485] kdvb-ad-1-fe-0  D ffff88013ed13f40     0  1471      2 0x00000000
1212
[ 4673.895495]  ffff88012ed91d70 0000000000000046 ffff88012b86dd00 ffff88012ed91fd8
1213
[ 4673.895507]  ffff88012ed91fd8 ffff88012ed91fd8 ffff88012b91ae80 ffff88012b86dd00
1214
[ 4673.895517]  ffff880136e18a30 ffff88012b86dd00 ffff880136e18a34 00000000ffffffff
1215
[ 4673.895528] Call Trace:
1216
[ 4673.895541]  [<ffffffff816cbfc9>] schedule+0x29/0x70
1217
[ 4673.895552]  [<ffffffff816cc27e>] schedule_preempt_disabled+0xe/0x10
1218
[ 4673.895563]  [<ffffffff816cad87>] __mutex_lock_slowpath+0xd7/0x150
1219
[ 4673.895573]  [<ffffffff815440e5>] ? i2c_unlock_adapter+0x25/0x40
1220
[ 4673.895584]  [<ffffffff816ca85a>] mutex_lock+0x2a/0x50
1221
[ 4673.895602]  [<ffffffffa02d669c>] dvb_usb_fe_sleep+0xcc/0xe0 [dvb_usb_v2]
1222
[ 4673.895617]  [<ffffffffa034a548>] ? m88ds3103_set_voltage+0x78/0x130 [m88ds3103]
1223
[ 4673.895639]  [<ffffffffa02b887c>] dvb_frontend_thread+0x28c/0x5a0 [dvb_core]
1224
[ 4673.895649]  [<ffffffff8107dea0>] ? finish_wait+0x80/0x80
1225
[ 4673.895670]  [<ffffffffa02b85f0>] ? dvb_register_frontend+0x190/0x190 [dvb_core]
1226
[ 4673.895679]  [<ffffffff8107d590>] kthread+0xc0/0xd0
1227
[ 4673.895689]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
1228
[ 4673.895698]  [<ffffffff816d56ac>] ret_from_fork+0x7c/0xb0
1229
[ 4673.895708]  [<ffffffff8107d4d0>] ? kthread_create_on_node+0x120/0x120
    (1-1/1)