#0 streaming_start_unref (ss=0x124c4d17b) at src/streaming.c:259 i = #1 0x000000000045b9f2 in gh_flush (gh=gh@entry=0x268e5d0) at src/plumbing/globalheaders.c:48 No locals. #2 0x000000000045bfa9 in globalheaders_destroy (pad=0x268e5d0) at src/plumbing/globalheaders.c:354 gh = 0x268e5d0 #3 0x000000000044c515 in profile_chain_close (prch=prch@entry=0x1b3ca80) at src/profile.c:731 No locals. #4 0x0000000000461257 in dvr_rec_unsubscribe (de=de@entry=0x27163c0, stopcode=0) at src/dvr/dvr_rec.c:124 prch = 0x1b3ca80 __PRETTY_FUNCTION__ = "dvr_rec_unsubscribe" #5 0x000000000045f1d9 in dvr_stop_recording (de=0x27163c0, stopcode=, saveconf=1) at src/dvr/dvr_db.c:929 No locals. #6 0x0000000000407ecc in mainloop () at src/main.c:410 gti = cb = ts = {tv_sec = 1414320360, tv_nsec = 63343} #7 main (argc=, argv=) at src/main.c:887 i = set = {__val = {16386, 0 }} adapter_mask = log_level = log_options = log_debug = log_trace = buf = "/home/tvserver/tvheadend\000\035\376\003\000\000\000\000\320\r\232\070\377\177\000\000\000\r\232\070\377\177\000\000\000\000\000\000\000\000\000\000\300\305\\O\352\177\000\000\320\331\\O\352\177\000\000G\327\332N\352\177\000\000x\r\203M\352\177\000\000\234.=O\352\177\000\000\000\000\000\000\001\000\000\000.N=\366\000\000\000\000\v\000\000\000\000\000\000\000\r\000\000\000\000\000\000\000\260\301\\O\352\177\000\000\026\070=O\352\177\000\000\001\000\000\000\000\000\000\000p\r\232\070\377\177\000\000(=\202M\352\177\000\000\200\016\232\070\377\177\000\000\250\001\203M\352\177\000\000\070\365\330\003\000\000\000\000p\016\232\070\377\177", '\000' ... pidfile = opt_help = 0 opt_version = 0 opt_fork = 0 opt_firstrun = 0 opt_stderr = 0 opt_syslog = 0 opt_uidebug = 0 opt_abort = 0 opt_noacl = 0 opt_fileline = 0 opt_threadid = 0 opt_ipv6 = 0 opt_tsfile_tuner = 0 opt_dump = 0 opt_xspf = 0 opt_dbus = 0 opt_dbus_session = 0 opt_nobackup = 0 opt_config = 0x0 opt_user = 0x0 opt_group = 0x0 opt_logpath = 0x7fff389a322e "tvh.log" opt_log_debug = 0x7fff389a324d "all" opt_log_trace = 0x7fff389a323e "mpegts" opt_pidpath = 0x4b77e8 "/var/run/tvheadend.pid" opt_dvb_adapters = 0x0 opt_bindaddr = 0x0 opt_subscribe = 0x0 opt_user_agent = 0x0 opt_satip_xml = {max = 10, num = 0, str = 0x11ed010} opt_tsfile = {max = 10, num = 0, str = 0x11ed070} cmdline_opts = {{sopt = 0 '\000', lopt = 0x0, desc = 0x4b77ff "Generic Options", type = OPT_BOOL, param = 0x0}, {sopt = 104 'h', lopt = 0x4b780f "help", desc = 0x4b7814 "Show this page", type = OPT_BOOL, param = 0x7fff389a0510}, {sopt = 118 'v', lopt = 0x4ca34f "version", desc = 0x4b7823 "Show version infomation", type = OPT_BOOL, param = 0x7fff389a0514}, {sopt = 0 '\000', lopt = 0x0, desc = 0x4b783b "Service Configuration", type = OPT_BOOL, param = 0x0}, {sopt = 99 'c', lopt = 0x4cecab "config", desc = 0x4b7851 "Alternate config path", type = OPT_STR, param = 0x7fff389a0558}, {sopt = 66 'B', lopt = 0x4b7867 "nobackup", desc = 0x4b73e8 "Do not backup config tree at upgrade", type = OPT_BOOL, param = 0x7fff389a0554}, {sopt = 102 'f', lopt = 0x4b7870 "fork", desc = 0x4b7875 "Fork and run as daemon", type = OPT_BOOL, param = 0x7fff389a0518}, {sopt = 117 'u', lopt = 0x4b7893 "user", desc = 0x4b788c "Run as user", type = OPT_STR, param = 0x7fff389a0560}, {sopt = 103 'g', lopt = 0x4b789f "group", desc = 0x4b7898 "Run as group", type = OPT_STR, param = 0x7fff389a0568}, {sopt = 112 'p', lopt = 0x4b77fb "pid", desc = 0x4b78a5 "Alternate pid path", type = OPT_STR, param = 0x7fff389a0588}, {sopt = 67 'C', lopt = 0x4b78b8 "firstrun", desc = 0x4b7410 "If no user account exists then create one with\nno username and no password. Use with care as\nit will allow world-wide administrative access\nto your Tvheadend installation until you edit\nthe access-con"..., type = OPT_BOOL, param = 0x7fff389a051c}, {sopt = 85 'U', lopt = 0x4b78c1 "dbus", desc = 0x4b78c6 "Enable DBus", type = OPT_BOOL, param = 0x7fff389a054c}, {sopt = 101 'e', lopt = 0x4b78d2 "dbus_session", desc = 0x4b7500 "DBus - use the session message bus instead system one", type = OPT_BOOL, param = 0x7fff389a0550}, {sopt = 97 'a', lopt = 0x4b7de9 "adapters", desc = 0x4b7538 "Only use specified DVB adapters (comma separated)", type = OPT_STR, param = 0x7fff389a0590}, {sopt = 0 '\000', lopt = 0x4b78df "satip_xml", desc = 0x4b7570 "URL with the SAT>IP server XML location", type = OPT_STR_LIST, param = 0x7fff389a05b0}, {sopt = 0 '\000', lopt = 0x0, desc = 0x4b78e9 "Server Connectivity", type = OPT_BOOL, param = 0x0}, {sopt = 54 '6', lopt = 0x4b78fd "ipv6", desc = 0x4b7902 "Listen on IPv6", type = OPT_BOOL, param = 0x7fff389a053c}, {sopt = 98 'b', lopt = 0x4b7911 "bindaddr", desc = 0x4b791a "Specify bind address", type = OPT_STR, param = 0x7fff389a0598}, {sopt = 0 '\000', lopt = 0x4b792f "http_port", desc = 0x4b7939 "Specify alternative http port", type = OPT_INT, param = 0x71cdfc }, {sopt = 0 '\000', lopt = 0x4b7957 "http_root", desc = 0x4b7598 "Specify alternative http webroot", type = OPT_STR, param = 0x71cde8 }, {sopt = 0 '\000', lopt = 0x4b7961 "htsp_port", desc = 0x4b796b "Specify alternative htsp port", type = OPT_INT, param = 0x71cdf8 }, {sopt = 0 '\000', lopt = 0x4b7989 "htsp_port2", desc = 0x4b7994 "Specify extra htsp port", type = OPT_INT, param = 0x71ce00 }, {sopt = 0 '\000', lopt = 0x4b79ac "useragent", desc = 0x4b75c0 "Specify User-Agent header for the http client", type = OPT_STR, param = 0x7fff389a05a8}, {sopt = 0 '\000', lopt = 0x4b79b6 "xspf", desc = 0x4b79bb "Use xspf playlist instead M3U", type = OPT_BOOL, param = 0x7fff389a0548}, {sopt = 0 '\000', lopt = 0x0, desc = 0x4b79d9 "Debug Options", type = OPT_BOOL, param = 0x0}, {sopt = 100 'd', lopt = 0x4b79f7 "stderr", desc = 0x4b79e7 "Enable debug on stderr", type = OPT_BOOL, param = 0x7fff389a0520}, {sopt = 115 's', lopt = 0x4b7a0e "syslog", desc = 0x4b79fe "Enable debug to syslog", type = OPT_BOOL, param = 0x7fff389a0524}, {sopt = 108 'l', lopt = 0x4b7a15 "logfile", desc = 0x4b7a1d "Enable debug to file", type = OPT_STR, param = 0x7fff389a0570}, {sopt = 0 '\000', lopt = 0x4b7a89 "debug", desc = 0x4b7a32 "Enable debug subsystems", type = OPT_STR, param = 0x7fff389a0578}, {sopt = 0 '\000', lopt = 0x4d07a9 "trace", desc = 0x4b7a4a "Enable trace subsystems", type = OPT_STR, param = 0x7fff389a0580}, {sopt = 0 '\000', lopt = 0x4b7a62 "fileline", desc = 0x4b75f0 "Add file and line numbers to debug", type = OPT_BOOL, param = 0x7fff389a0534}, {sopt = 0 '\000', lopt = 0x4b7a6b "threadid", desc = 0x4b7a74 "Add the thread ID to debug", type = OPT_BOOL, param = 0x7fff389a0538}, {sopt = 0 '\000', lopt = 0x4b7a8f "uidebug", desc = 0x4b7618 "Enable webUI debug (non-minified JS)", type = OPT_BOOL, param = 0x7fff389a0528}, {sopt = 65 'A', lopt = 0x4b7aa3 "abort", desc = 0x4b7a97 "Immediately abort", type = OPT_BOOL, param = 0x7fff389a052c}, {sopt = 68 'D', lopt = 0x4b7aa9 "dump", desc = 0x4b7aae "Enable coredumps for daemon", type = OPT_BOOL, param = 0x7fff389a0544}, {sopt = 0 '\000', lopt = 0x4b7aca "noacl", desc = 0x4b7640 "Disable all access control checks", type = OPT_BOOL, param = 0x7fff389a0530}, {sopt = 106 'j', lopt = 0x4b7ad0 "join", desc = 0x4b7668 "Subscribe to a service permanently", type = OPT_STR, param = 0x7fff389a05a0}, {sopt = 0 '\000', lopt = 0x0, desc = 0x4b7ad5 "TODO: testing", type = OPT_BOOL, param = 0x0}, {sopt = 0 '\000', lopt = 0x4b7ae3 "tsfile_tuners", desc = 0x4b7af1 "Number of tsfile tuners", type = OPT_INT, param = 0x7fff389a0540}, {sopt = 0 '\000', lopt = 0x4b7b09 "tsfile", desc = 0x4b7b10 "tsfile input (mux file)", type = OPT_STR_LIST, param = 0x7fff389a05c0}}