[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.10-7-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-7-desktop root=UUID=2204ec6a-9d14-434f-b9ef-c55ed2b24a89 resume=/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WCAV5L361972-part4 splash=silent quiet showopts [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff9ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffa0000-0x000000007ffaffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./M3A785GM-LE/128M, BIOS P1.10 11/26/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fb4000, 0x01fb4fff] PGTABLE [ 0.000000] BRK [0x01fb5000, 0x01fb5fff] PGTABLE [ 0.000000] BRK [0x01fb6000, 0x01fb6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff] [ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M [ 0.000000] BRK [0x01fb7000, 0x01fb7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff] [ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff9ffff] [ 0.000000] [mem 0x7fe00000-0x7ff9ffff] page 4k [ 0.000000] BRK [0x01fb8000, 0x01fb8fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33f92000-0x35fc0fff] [ 0.000000] ACPI: RSDP 00000000000fba70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ffa0000 0003C (v01 112609 RSDT2051 20091126 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffa0200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603) [ 0.000000] ACPI: DSDT 000000007ffa0450 09203 (v01 AS281 AS281101 00000101 INTL 20051117) [ 0.000000] ACPI: FACS 000000007ffb0000 00040 [ 0.000000] ACPI: APIC 000000007ffa0390 0007C (v01 112609 APIC2051 20091126 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffa0410 0003C (v01 112609 OEMMCFG 20091126 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffb0040 00072 (v01 112609 OEMB2051 20091126 MSFT 00000097) [ 0.000000] ACPI: AAFT 000000007ffaa450 00027 (v01 112609 OEMAAFT 20091126 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007ffaa480 00458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff9ffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff9ffff] [ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff9ffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7ff9ffff] [ 0.000000] On node 0 totalpages: 524093 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 520096 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516905 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-7-desktop root=UUID=2204ec6a-9d14-434f-b9ef-c55ed2b24a89 resume=/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WCAV5L361972-part4 splash=silent quiet showopts [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 13c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2017552K/2096372K available (5831K kernel code, 772K rwdata, 4344K rodata, 1340K init, 1640K bss, 78820K reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-511. [ 0.000000] NR_IRQS:33024 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2711.327 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5422.65 BogoMIPS (lpj=2711327) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000038] Security Framework initialized [ 0.000051] AppArmor: AppArmor initialized [ 0.000194] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000924] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001277] Mount-cache hash table entries: 256 [ 0.001464] Initializing cgroup subsys memory [ 0.001479] Initializing cgroup subsys devices [ 0.001480] Initializing cgroup subsys freezer [ 0.001482] Initializing cgroup subsys net_cls [ 0.001484] Initializing cgroup subsys blkio [ 0.001485] Initializing cgroup subsys perf_event [ 0.001488] Initializing cgroup subsys hugetlb [ 0.001507] tseg: 0000000000 [ 0.001514] CPU: Physical Processor ID: 0 [ 0.001515] CPU: Processor Core ID: 0 [ 0.001517] mce: CPU supports 6 MCE banks [ 0.001522] LVT offset 0 assigned for vector 0xf9 [ 0.001525] process: using AMD E400 aware idle routine [ 0.001528] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 [ 0.001599] Freeing SMP alternatives memory: 24K (ffffffff81e12000 - ffffffff81e18000) [ 0.002179] ACPI: Core revision 20130517 [ 0.005338] ACPI: All ACPI Tables successfully acquired [ 0.012806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.022818] smpboot: CPU0: AMD Athlon(tm) II X2 4400e Processor (fam: 10, model: 06, stepping: 02) [ 0.124254] Performance Events: AMD PMU driver. [ 0.124258] ... version: 0 [ 0.124259] ... bit width: 48 [ 0.124260] ... generic registers: 4 [ 0.124261] ... value mask: 0000ffffffffffff [ 0.124262] ... max period: 00007fffffffffff [ 0.124263] ... fixed-purpose events: 0 [ 0.124264] ... event mask: 000000000000000f [ 0.124301] process: System has AMD C1E enabled [ 0.124315] process: Switch to broadcast mode on CPU0 [ 0.131453] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.133485] smpboot: Booting Node 0, Processors #1 [ 0.146657] Brought up 2 CPUs [ 0.146660] smpboot: Total of 2 processors activated (10845.30 BogoMIPS) [ 0.146689] process: Switch to broadcast mode on CPU1 [ 0.147276] devtmpfs: initialized [ 0.148442] PM: Registering ACPI NVS region [mem 0x7ffb0000-0x7ffdffff] (196608 bytes) [ 0.148597] RTC time: 1:36:12, date: 03/30/14 [ 0.148645] NET: Registered protocol family 16 [ 0.148751] node 0 link 0: io port [1000, ffffff] [ 0.148753] TOM: 0000000080000000 aka 2048M [ 0.148756] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.148758] node 0 link 0: mmio [a0000, bffff] [ 0.148760] node 0 link 0: mmio [80000000, dfffffff] [ 0.148762] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.148763] node 0 link 0: mmio [f0000000, ffefffff] [ 0.148765] bus: [bus 00-07] on node 0 link 0 [ 0.148767] bus: 00 [io 0x0000-0xffff] [ 0.148768] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.148769] bus: 00 [mem 0x80000000-0xdfffffff] [ 0.148770] bus: 00 [mem 0xf0000000-0xfcffffffff] [ 0.148809] ACPI: bus type PCI registered [ 0.148810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.148861] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.148863] PCI: not using MMCONFIG [ 0.148864] PCI: Using configuration type 1 for base access [ 0.148865] PCI: Using configuration type 1 for extended access [ 0.148962] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.148963] mtrr: probably your BIOS does not setup all CPUs. [ 0.148964] mtrr: corrected configuration. [ 0.149706] bio: create slab at 0 [ 0.149839] ACPI: Added _OSI(Module Device) [ 0.149840] ACPI: Added _OSI(Processor Device) [ 0.149842] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149843] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150496] ACPI: EC: Look up EC in DSDT [ 0.151671] ACPI: Executed 4 blocks of module-level executable AML code [ 0.155907] ACPI: Interpreter enabled [ 0.155917] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.155930] ACPI: (supports S0 S1 S3 S4 S5) [ 0.155932] ACPI: Using IOAPIC for interrupt routing [ 0.155961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157244] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.164871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.164954] ACPI: No dock devices found. [ 0.171439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.171745] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) [ 0.172186] acpi PNP0A03:00: ACPI _OSC control (0x18) granted [ 0.172537] PCI host bridge to bus 0000:00 [ 0.172540] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.172542] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.172544] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.172546] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.172548] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.172549] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.172551] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.172562] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.172670] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.172700] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.172753] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.172791] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 0.172820] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.172871] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.172919] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.172938] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] [ 0.172947] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] [ 0.172956] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] [ 0.172965] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] [ 0.172974] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] [ 0.172984] pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff] [ 0.173098] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.173111] pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff] [ 0.173211] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.173241] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.173254] pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff] [ 0.173357] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.173396] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.173414] pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff] [ 0.173494] pci 0000:00:12.2: supports D1 D2 [ 0.173496] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.173551] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.173586] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.173599] pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff] [ 0.173699] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.173730] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.173742] pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff] [ 0.173842] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.173880] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.173898] pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff] [ 0.173977] pci 0000:00:13.2: supports D1 D2 [ 0.173979] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.174033] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.174073] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.174228] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.174244] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.174253] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.174262] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.174271] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.174280] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.174398] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.174419] pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit] [ 0.174483] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.174535] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.174568] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.174700] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.174780] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.174814] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.174827] pci 0000:00:14.5: reg 0x10: [mem 0xfcffa000-0xfcffafff] [ 0.174927] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.174964] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.175036] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.175107] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.175176] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.175246] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.175372] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 [ 0.175382] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.175391] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.175401] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.175408] pci 0000:01:00.0: reg 0x24: [io 0xd800-0xd87f] [ 0.175415] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref] [ 0.175485] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.175494] pci 0000:01:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff] [ 0.177428] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.177435] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.177438] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.177442] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.177516] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.177530] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.177549] pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref] [ 0.177562] pci 0000:02:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref] [ 0.177570] pci 0000:02:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref] [ 0.177616] pci 0000:02:00.0: supports D1 D2 [ 0.177618] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179428] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.179435] pci 0000:00:05.0: bridge window [io 0xe000-0xefff] [ 0.179438] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.179441] pci 0000:00:05.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.179517] pci 0000:03:06.0: [1131:7133] type 00 class 0x048000 [ 0.179539] pci 0000:03:06.0: reg 0x10: [mem 0xfebff800-0xfebfffff] [ 0.179635] pci 0000:03:06.0: supports D1 D2 [ 0.179704] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.179710] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.179714] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.179716] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.179718] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.179720] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.179722] pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.179723] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.180448] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.180509] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.180568] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.180626] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.180684] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.180743] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.180801] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.180858] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.180997] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.181003] ACPI: \_SB_.PCI0: notify handler is installed [ 0.181033] Found 1 acpi root devices [ 0.181142] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.181144] vgaarb: loaded [ 0.181145] vgaarb: bridge control possible 0000:01:00.0 [ 0.181230] SCSI subsystem initialized [ 0.181232] ACPI: bus type ATA registered [ 0.181292] libata version 3.00 loaded. [ 0.181298] ACPI: bus type USB registered [ 0.181315] usbcore: registered new interface driver usbfs [ 0.181323] usbcore: registered new interface driver hub [ 0.181382] usbcore: registered new device driver usb [ 0.181471] PCI: Using ACPI for IRQ routing [ 0.189777] PCI: pci_cache_line_size set to 64 bytes [ 0.189835] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff] [ 0.189837] e820: reserve RAM buffer [mem 0x7ffa0000-0x7fffffff] [ 0.189932] NetLabel: Initializing [ 0.189933] NetLabel: domain hash size = 128 [ 0.189934] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.189944] NetLabel: unlabeled traffic allowed by default [ 0.190012] Switched to clocksource refined-jiffies [ 0.192125] AppArmor: AppArmor Filesystem Enabled [ 0.192153] pnp: PnP ACPI init [ 0.192167] ACPI: bus type PNP registered [ 0.192393] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192448] pnp 00:01: [dma 4] [ 0.192468] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.192502] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.192525] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.192557] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.192826] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.192959] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.192962] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.192964] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193215] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.193217] system 00:07: [io 0x040b] has been reserved [ 0.193219] system 00:07: [io 0x04d6] has been reserved [ 0.193221] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.193223] system 00:07: [io 0x0c14] has been reserved [ 0.193225] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.193227] system 00:07: [io 0x0c52] has been reserved [ 0.193229] system 00:07: [io 0x0c6c] has been reserved [ 0.193231] system 00:07: [io 0x0c6f] has been reserved [ 0.193233] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.193235] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.193237] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.193239] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.193241] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.193243] system 00:07: [io 0x0800-0x089f] could not be reserved [ 0.193245] system 00:07: [io 0x0b00-0x0b0f] has been reserved [ 0.193247] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.193249] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.193251] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.193253] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.193255] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.193258] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.193260] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193658] system 00:08: [io 0x0280-0x028f] has been reserved [ 0.193661] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.193663] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193725] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.193727] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193915] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.193917] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.193920] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.193922] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.193924] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.193926] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.194053] pnp: PnP ACPI: found 11 devices [ 0.194054] ACPI: bus type PNP unregistered [ 0.200124] Switched to clocksource acpi_pm [ 0.200145] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.200147] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.200150] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.200153] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.200156] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.200158] pci 0000:00:05.0: bridge window [io 0xe000-0xefff] [ 0.200160] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.200163] pci 0000:00:05.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.200166] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.200170] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.200415] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.200417] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.200418] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.200420] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.200422] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff] [ 0.200423] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.200425] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.200427] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff] [ 0.200429] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.200431] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.200432] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.200434] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.200436] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.200438] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.200439] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.200441] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.200443] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.200444] pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff] [ 0.200446] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.200504] NET: Registered protocol family 2 [ 0.200698] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.200788] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.200866] TCP: Hash tables configured (established 16384 bind 16384) [ 0.200907] TCP: reno registered [ 0.200911] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.200927] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.201019] NET: Registered protocol family 1 [ 0.583687] pci 0000:01:00.0: Boot video device [ 0.583718] PCI: CLS 64 bytes, default 64 [ 0.583774] Unpacking initramfs... [ 0.987165] Freeing initrd memory: 32956K (ffff880033f92000 - ffff880035fc1000) [ 0.988139] LVT offset 1 assigned for vector 0x400 [ 0.988145] IBS: LVT offset 1 assigned [ 0.988176] perf: AMD IBS detected (0x0000001f) [ 0.988344] microcode: CPU0: patch_level=0x01000098 [ 0.988351] microcode: CPU1: patch_level=0x01000098 [ 0.988406] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.988408] Scanning for low memory corruption every 60 seconds [ 0.988706] audit: initializing netlink socket (disabled) [ 0.988719] type=2000 audit(1396143372.879:1): initialized [ 1.004745] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.005043] zbud: loaded [ 1.005252] VFS: Disk quotas dquot_6.5.2 [ 1.005294] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.005482] msgmni has been set to 4004 [ 1.005854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.005902] io scheduler noop registered [ 1.005904] io scheduler deadline registered [ 1.005913] io scheduler cfq registered (default) [ 1.006029] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.006154] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 1.006237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.006255] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.006306] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.006308] vesafb: scrolling: redraw [ 1.006309] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.006365] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010400000, using 1216k, total 1216k [ 1.010270] Console: switching to colour frame buffer device 80x30 [ 1.014038] fb0: VESA VGA frame buffer device [ 1.014068] GHES: HEST is not enabled! [ 1.014153] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 1.016039] hpet_acpi_add: no address or irqs in _CRS [ 1.016111] Non-volatile memory driver v1.3 [ 1.016112] Linux agpgart interface v0.103 [ 1.016208] ahci 0000:00:11.0: version 3.0 [ 1.016504] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.016507] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.017188] scsi0 : ahci [ 1.017311] scsi1 : ahci [ 1.017376] scsi2 : ahci [ 1.017479] scsi3 : ahci [ 1.017541] scsi4 : ahci [ 1.017604] scsi5 : ahci [ 1.017638] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22 [ 1.017641] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22 [ 1.017643] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22 [ 1.017646] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22 [ 1.017648] ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff00 irq 22 [ 1.017650] ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff80 irq 22 [ 1.017763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.017767] ehci-pci: EHCI PCI platform driver [ 1.017950] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.017956] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.017963] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.017975] ehci-pci 0000:00:12.2: debug port 1 [ 1.018008] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800 [ 1.023892] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.023918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.023920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.023921] usb usb1: Product: EHCI Host Controller [ 1.023923] usb usb1: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd [ 1.023924] usb usb1: SerialNumber: 0000:00:12.2 [ 1.024062] hub 1-0:1.0: USB hub found [ 1.024067] hub 1-0:1.0: 6 ports detected [ 1.024361] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.024368] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.024372] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.024383] ehci-pci 0000:00:13.2: debug port 1 [ 1.024419] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcfff400 [ 1.029898] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.029927] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.029929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.029930] usb usb2: Product: EHCI Host Controller [ 1.029932] usb usb2: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd [ 1.029933] usb usb2: SerialNumber: 0000:00:13.2 [ 1.030114] hub 2-0:1.0: USB hub found [ 1.030119] hub 2-0:1.0: 6 ports detected [ 1.030275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.030278] uhci_hcd: USB Universal Host Controller Interface driver [ 1.030345] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.033082] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.033123] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.033279] mousedev: PS/2 mouse device common for all mice [ 1.033410] rtc_cmos 00:02: RTC can wake from S4 [ 1.033563] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.033584] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.033592] cpuidle: using governor ladder [ 1.033594] cpuidle: using governor menu [ 1.033599] ledtrig-cpu: registered to indicate activity on CPUs [ 1.033613] hidraw: raw HID events driver (C) Jiri Kosina [ 1.033682] usbcore: registered new interface driver usbhid [ 1.033683] usbhid: USB HID core driver [ 1.033771] TCP: cubic registered [ 1.033829] NET: Registered protocol family 10 [ 1.033987] Key type dns_resolver registered [ 1.034293] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WCAV5L361972-part4 [ 1.323166] ata2: SATA link down (SStatus 0 SControl 300) [ 1.323201] ata4: SATA link down (SStatus 0 SControl 300) [ 1.323232] ata5: SATA link down (SStatus 0 SControl 300) [ 1.323258] ata6: SATA link down (SStatus 0 SControl 300) [ 1.323285] ata3: SATA link down (SStatus 0 SControl 300) [ 1.326156] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.441131] usb 1-2: New USB device found, idVendor=0409, idProduct=0059 [ 1.441135] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.441418] hub 1-2:1.0: USB hub found [ 1.441476] hub 1-2:1.0: 4 ports detected [ 1.477291] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.480279] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 1.480283] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.482545] ata1.00: configured for UDMA/133 [ 1.482778] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5 [ 1.483009] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.483173] sd 0:0:0:0: [sda] Write Protect is off [ 1.483176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.533013] sda: sda1 < sda5 > sda2 sda3 sda4 [ 1.533803] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.533825] PM: Hibernation image not present or could not be loaded. [ 1.533850] registered taskstats version 1 [ 1.534265] Magic number: 6:918:610 [ 1.534376] rtc_cmos 00:02: setting system clock to 2014-03-30 01:36:13 UTC (1396143373) [ 1.535526] Freeing unused kernel memory: 1340K (ffffffff81cc3000 - ffffffff81e12000) [ 1.535530] Write protecting the kernel read-only data: 12288k [ 1.536471] Freeing unused kernel memory: 304K (ffff8800015b4000 - ffff880001600000) [ 1.540770] Freeing unused kernel memory: 1800K (ffff880001a3e000 - ffff880001c00000) [ 1.578693] hp_sw: device handler registered [ 1.580317] alua: device handler registered [ 1.581911] emc: device handler registered [ 1.583537] rdac: device handler registered [ 1.588082] systemd-udevd[119]: starting version 208 [ 1.599321] ohci-pci: OHCI PCI platform driver [ 1.599506] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.599513] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.599545] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000 [ 1.603629] ACPI: processor limited to max C-state 1 [ 1.654438] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.654442] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.654445] usb usb3: Product: OHCI PCI host controller [ 1.654446] usb usb3: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd [ 1.654448] usb usb3: SerialNumber: 0000:00:12.0 [ 1.654608] hub 3-0:1.0: USB hub found [ 1.654614] hub 3-0:1.0: 3 ports detected [ 1.654856] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.654862] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.654878] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000 [ 1.709484] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.709488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.709490] usb usb4: Product: OHCI PCI host controller [ 1.709492] usb usb4: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd [ 1.709493] usb usb4: SerialNumber: 0000:00:12.1 [ 1.709659] hub 4-0:1.0: USB hub found [ 1.709665] hub 4-0:1.0: 3 ports detected [ 1.709910] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.709916] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.709941] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000 [ 1.717597] usb 1-2.1: new low-speed USB device number 3 using ehci-pci [ 1.764546] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.764550] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.764551] usb usb5: Product: OHCI PCI host controller [ 1.764553] usb usb5: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd [ 1.764554] usb usb5: SerialNumber: 0000:00:13.0 [ 1.764713] hub 5-0:1.0: USB hub found [ 1.764720] hub 5-0:1.0: 3 ports detected [ 1.764971] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.764977] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.764993] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000 [ 1.806927] usb 1-2.1: New USB device found, idVendor=55aa, idProduct=00ff [ 1.806931] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.809777] input: HID 55aa:00ff as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input0 [ 1.809868] hid-generic 0003:55AA:00FF.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 55aa:00ff] on usb-0000:00:12.2-2.1/input0 [ 1.818636] input: HID 55aa:00ff as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.1/input/input1 [ 1.818769] hid-generic 0003:55AA:00FF.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 55aa:00ff] on usb-0000:00:12.2-2.1/input1 [ 1.819540] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.819544] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.819546] usb usb6: Product: OHCI PCI host controller [ 1.819548] usb usb6: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd [ 1.819549] usb usb6: SerialNumber: 0000:00:13.1 [ 1.819664] hub 6-0:1.0: USB hub found [ 1.819671] hub 6-0:1.0: 3 ports detected [ 1.819916] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.819923] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.819938] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000 [ 1.874638] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.874641] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.874643] usb usb7: Product: OHCI PCI host controller [ 1.874645] usb usb7: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd [ 1.874646] usb usb7: SerialNumber: 0000:00:14.5 [ 1.874805] hub 7-0:1.0: USB hub found [ 1.874812] hub 7-0:1.0: 2 ports detected [ 1.990687] tsc: Refined TSC clocksource calibration: 2711.250 MHz [ 2.306247] microcode: CPU0: new patch_level=0x010000c7 [ 2.306272] microcode: CPU1: new patch_level=0x010000c7 [ 2.663864] xor: measuring software checksum speed [ 2.673190] prefetch64-sse: 10908.000 MB/sec [ 2.683197] generic_sse: 10348.000 MB/sec [ 2.683199] xor: using function: prefetch64-sse (10908.000 MB/sec) [ 2.700231] raid6: sse2x1 3789 MB/s [ 2.717229] raid6: sse2x2 6000 MB/s [ 2.734251] raid6: sse2x4 6765 MB/s [ 2.734252] raid6: using algorithm sse2x4 (6765 MB/s) [ 2.734254] raid6: using intx1 recovery algorithm [ 2.737638] bio: create slab at 1 [ 2.737812] Btrfs loaded [ 2.814652] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 2.814657] PM: Basic memory bitmaps created [ 2.821502] PM: Basic memory bitmaps freed [ 2.845501] PM: Starting manual resume from disk [ 2.845506] PM: Hibernation image partition 8:4 present [ 2.845507] PM: Looking for hibernation image. [ 2.845748] PM: Image not found (code -22) [ 2.845752] PM: Hibernation image not present or could not be loaded. [ 2.931458] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 2.991612] Switched to clocksource tsc [ 3.145166] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 3.874098] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 3.910673] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 4.278224] systemd[1]: Inserted module 'autofs4' [ 4.288419] systemd[1]: Set hostname to . [ 4.717199] device-mapper: uevent: version 1.0.3 [ 4.717251] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 4.743328] LVM: Logical Volume autoactivation enabled. [ 4.743353] LVM: Activation generator successfully completed. [ 5.571076] systemd[1]: Starting Replay Read-Ahead Data... [ 5.571744] systemd[1]: Starting Collect Read-Ahead Data... [ 5.572226] systemd[1]: Starting Syslog Socket. [ 5.572324] systemd[1]: Listening on Syslog Socket. [ 5.572354] systemd[1]: Starting System Time Synchronized. [ 5.572383] systemd[1]: Reached target System Time Synchronized. [ 5.572395] systemd[1]: Starting Remote File Systems (Pre). [ 5.572421] systemd[1]: Reached target Remote File Systems (Pre). [ 5.572434] systemd[1]: Starting Remote File Systems. [ 5.572460] systemd[1]: Reached target Remote File Systems. [ 5.572486] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.572528] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.572543] systemd[1]: Starting Delayed Shutdown Socket. [ 5.572580] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.572605] systemd[1]: Starting LVM2 metadata daemon socket. [ 5.572648] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.572694] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.572833] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.572847] systemd[1]: Starting Encrypted Volumes. [ 5.572889] systemd[1]: Reached target Encrypted Volumes. [ 5.572912] systemd[1]: Starting Journal Socket. [ 5.572969] systemd[1]: Listening on Journal Socket. [ 5.573055] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.573530] systemd[1]: Mounting Debug File System... [ 5.573966] systemd[1]: Mounting Huge Pages File System... [ 5.574405] systemd[1]: Starting Create dynamic rule for /dev/root link... [ 5.574870] systemd[1]: Starting Journal Service... [ 5.575421] systemd[1]: Started Journal Service. [ 5.610905] systemd-readahead[241]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 6.337943] systemd-journald[247]: Vacuuming done, freed 0 bytes [ 6.571555] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 6.964376] systemd-udevd[278]: starting version 208 [ 7.188005] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.417133] wmi: Mapper loaded [ 7.417621] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 7.417810] ACPI: Power Button [PWRB] [ 7.417851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 7.417874] ACPI: Power Button [PWRF] [ 7.418758] acpi-cpufreq: overriding BIOS provided _PSD data [ 7.424544] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.426057] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.426309] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 7.426465] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000037a000, 00:25:22:34:ae:71, XID 081000c0 IRQ 42 [ 7.426468] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.437375] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251) [ 7.437383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.437619] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 7.437658] sp5100_tco: PCI Revision ID: 0x3c [ 7.437679] sp5100_tco: failed to find MMIO address, giving up. [ 7.438519] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 7.438824] scsi6 : pata_atiixp [ 7.439416] scsi7 : pata_atiixp [ 7.439751] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 7.439753] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 7.442855] MCE: In-kernel MCE decoding enabled. [ 7.444625] EDAC MC: Ver: 3.0.0 [ 7.445496] AMD64 EDAC driver v3.4.0 [ 7.445524] EDAC amd64: DRAM ECC disabled. [ 7.445531] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 7.446360] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 7.609863] ata8.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A101, max UDMA/33 [ 7.616194] ata8.00: configured for UDMA/33 [ 7.623591] scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A101 PQ: 0 ANSI: 5 [ 7.624050] scsi 7:0:0:0: Attached scsi generic sg1 type 5 [ 7.736237] kvm: Nested Virtualization enabled [ 7.736250] kvm: Nested Paging enabled [ 7.783889] Linux video capture interface: v2.00 [ 7.804435] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 7.804825] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfebff800 [ 7.804843] saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,autodetected] [ 7.804878] saa7133[0]: board init: gpio is 211400 [ 7.945657] saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 7.945666] saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff [ 7.945671] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff [ 7.945676] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945681] saa7133[0]: i2c eeprom 40: ff 00 10 c0 96 12 08 00 c2 96 c6 1c 16 3a 15 ff [ 7.945686] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945691] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945696] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945701] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945706] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945711] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945716] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945720] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945725] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945730] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.945735] saa7133[0]: i2c eeprom f0: 00 0c 45 00 8f 01 ff ff ff ff ff ff ff ff ff ff [ 7.951672] saa7133[0]: probe IR chip @ i2c 0x0b: yes [ 7.964709] tuner 0-004b: Tuner -1 found with type(s) Radio TV. [ 8.001736] tda829x 0-004b: setting tuner address to 61 [ 8.036779] tda829x 0-004b: type set to tda8290+75a [ 8.183704] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.183710] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.184232] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 8.455229] ALSA hda_intel.c:3317 0000:00:14.2: Using LPIB position fix [ 8.459693] ALSA hda_intel.c:1787 0000:00:14.2: Enable sync_write for stable communication [ 8.466323] ALSA patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x4004c601 [ 8.466328] ALSA patch_realtek.c:420 SKU: port_connectivity=0x1 [ 8.466330] ALSA patch_realtek.c:421 SKU: enable_pcbeep=0x0 [ 8.466332] ALSA patch_realtek.c:422 SKU: check_sum=0x00000004 [ 8.466334] ALSA patch_realtek.c:423 SKU: customization=0x000000c6 [ 8.466336] ALSA patch_realtek.c:424 SKU: external_amp=0x0 [ 8.466338] ALSA patch_realtek.c:425 SKU: platform_type=0x0 [ 8.466339] ALSA patch_realtek.c:426 SKU: swap=0x0 [ 8.466341] ALSA patch_realtek.c:427 SKU: override=0x1 [ 8.466656] ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.466658] ALSA hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.466661] ALSA hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.466662] ALSA hda_auto_parser.c:402 mono: mono_out=0x0 [ 8.466664] ALSA hda_auto_parser.c:406 inputs: [ 8.466667] ALSA hda_auto_parser.c:410 Front Mic=0x19 [ 8.466669] ALSA hda_auto_parser.c:410 Rear Mic=0x18 [ 8.466671] ALSA hda_auto_parser.c:410 Line=0x1a [ 8.466673] ALSA patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d [ 8.466676] ALSA patch_realtek.c:506 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662 [ 8.479925] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 8.480076] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 8.480139] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 8.480198] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 8.480249] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 8.480486] hda_intel: Disabling MSI [ 8.480496] ALSA hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client [ 8.480524] ALSA hda_intel.c:3593 0000:01:00.1: Disabling 64bit DMA [ 8.483709] ALSA hda_intel.c:1748 0000:01:00.1: Enable delay in RIRB handling [ 8.685165] nvidia: module license 'NVIDIA' taints kernel. [ 8.685176] Disabling lock debugging due to kernel taint [ 8.790643] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 8.790827] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 8.790978] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 8.791126] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 8.793695] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.793994] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.119 Fri Jan 17 09:30:54 PST 2014 [ 9.778066] Adding 4193276k swap on /dev/sda4. Priority:-1 extents:1 across:4193276k FS [ 10.951788] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 11.009202] Registered IR keymap rc-flydvb [ 11.009405] input: i2c IR (FlyDVB Trio) as /devices/virtual/rc/rc0/input14 [ 11.011384] rc0: i2c IR (FlyDVB Trio) as /devices/virtual/rc/rc0 [ 11.011391] ir-kbd-i2c: i2c IR (FlyDVB Trio) detected at i2c-0/0-000b/ir0 [saa7133[0]] [ 11.044370] saa7133[0]: registered device video0 [v4l2] [ 11.044427] saa7133[0]: registered device vbi0 [ 11.044470] saa7133[0]: registered device radio0 [ 11.049727] dvb_init() allocating 1 frontend [ 11.058263] DVB: registering new adapter (saa7133[0]) [ 11.058272] saa7134 0000:03:06.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 11.122361] tda1004x: setting up plls for 48MHz sampling clock [ 12.179424] EXT4-fs (sda5): Mount option "noacl" will be removed by 3.5 Contact linux-ext4@vger.kernel.org if you think we should keep it. [ 12.179439] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! [ 13.076916] tda1004x: found firmware revision 29 -- ok [ 13.107042] EXT4-fs (sda5): mounted filesystem with journalled data mode. Opts: data=journal,noacl [ 13.118771] systemd-journald[247]: Received request to flush runtime journal from PID 1 [ 13.211744] saa7134 ALSA driver for DMA sound loaded [ 13.211785] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 21 registered as card -1 [ 13.431896] type=1400 audit(1396136185.386:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=463 comm="apparmor_parser" [ 13.449011] type=1400 audit(1396136185.403:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=471 comm="apparmor_parser" [ 13.457859] type=1400 audit(1396136185.412:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=475 comm="apparmor_parser" [ 13.467344] type=1400 audit(1396136185.422:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=479 comm="apparmor_parser" [ 13.481063] type=1400 audit(1396136185.435:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=484 comm="apparmor_parser" [ 13.481731] type=1400 audit(1396136185.436:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=484 comm="apparmor_parser" [ 13.482403] type=1400 audit(1396136185.437:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=484 comm="apparmor_parser" [ 13.482702] type=1400 audit(1396136185.437:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=484 comm="apparmor_parser" [ 13.490983] type=1400 audit(1396136185.445:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=488 comm="apparmor_parser" [ 13.500177] type=1400 audit(1396136185.454:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/auth" pid=492 comm="apparmor_parser" [ 28.292631] fuse init (API version 7.22) [ 30.754924] r8169 0000:02:00.0 eth0: link down [ 30.754969] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.769813] Bluetooth: Core ver 2.16 [ 30.769836] NET: Registered protocol family 31 [ 30.769837] Bluetooth: HCI device and connection manager initialized [ 30.769847] Bluetooth: HCI socket layer initialized [ 30.769849] Bluetooth: L2CAP socket layer initialized [ 30.769853] Bluetooth: SCO socket layer initialized [ 30.773099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.773103] Bluetooth: BNEP filters: protocol multicast [ 30.773112] Bluetooth: BNEP socket layer initialized [ 33.311878] NVRM: Your system is not currently configured to drive a VGA console [ 33.311890] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 33.311898] NVRM: requires the use of a text-mode VGA console. Use of other console [ 33.311903] NVRM: drivers including, but not limited to, vesafb, may result in [ 33.311908] NVRM: corruption and stability problems, and is not supported. [ 33.750132] RPC: Registered named UNIX socket transport module. [ 33.750137] RPC: Registered udp transport module. [ 33.750138] RPC: Registered tcp transport module. [ 33.750140] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 33.754230] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 35.457816] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 35.458092] NFSD: starting 90-second grace period (net ffffffff81c8a800) [ 44.833325] tda1004x: setting up plls for 48MHz sampling clock [ 46.766870] tda1004x: found firmware revision 29 -- ok [ 116.156756] r8169 0000:02:00.0 eth0: link down [ 116.156840] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 119.421858] r8169 0000:02:00.0 eth0: link down [ 119.421912] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 119.901185] r8169 0000:02:00.0 eth0: link down [ 119.901231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 121.787832] r8169 0000:02:00.0 eth0: link up [ 121.787845] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 123.243156] r8169 0000:02:00.0 eth0: link down [ 123.243180] r8169 0000:02:00.0 eth0: link down [ 123.243239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 129.316851] r8169 0000:02:00.0 eth0: link down [ 129.317032] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 130.941617] r8169 0000:02:00.0 eth0: link up [ 130.941626] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 235.727384] r8169 0000:02:00.0 eth0: link down [ 235.727391] r8169 0000:02:00.0 eth0: link down [ 235.727466] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 237.393597] r8169 0000:02:00.0 eth0: link up [ 237.393617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 240.555841] PM: Syncing filesystems ... done. [ 240.622465] PM: Preparing system for mem sleep [ 240.684448] Freezing user space processes ... (elapsed 0.031 seconds) done. [ 240.715882] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 240.721488] PM: Entering mem sleep [ 240.721525] Suspending console(s) (use no_console_suspend to debug) [ 240.721921] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 240.760219] sd 0:0:0:0: [sda] Stopping disk [ 241.486966] PM: suspend of devices complete after 764.651 msecs [ 241.487148] PM: late suspend of devices complete after 0.179 msecs [ 241.498125] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI [ 241.498218] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI [ 241.509010] ohci-pci 0000:00:13.1: System wakeup enabled by ACPI [ 241.509033] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI [ 241.509064] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 241.520019] ohci-pci 0000:00:12.1: System wakeup enabled by ACPI [ 241.520042] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 241.520103] PM: noirq suspend of devices complete after 32.924 msecs [ 241.520165] ACPI: Preparing to enter system sleep state S3 [ 241.923637] PM: Saving platform NVS memory [ 241.923770] Disabling non-boot CPUs ... [ 241.925067] smpboot: CPU 1 is now offline [ 241.925869] ACPI: Low-level resume complete [ 241.925909] PM: Restoring platform NVS memory [ 241.926196] microcode: CPU0: new patch_level=0x010000c7 [ 241.926276] Enabling non-boot CPUs ... [ 241.926380] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 241.937430] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu [ 241.937431] perf: IBS APIC setup failed on cpu #1 [ 241.939578] process: Switch to broadcast mode on CPU1 [ 241.939653] microcode: CPU1: new patch_level=0x010000c7 [ 241.939755] CPU1 is up [ 241.940188] ACPI: Waking up from system sleep state S3 [ 241.962048] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 241.962071] ohci-pci 0000:00:12.1: System wakeup disabled by ACPI [ 241.973040] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 241.973067] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI [ 241.973090] ohci-pci 0000:00:13.1: System wakeup disabled by ACPI [ 241.984049] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI [ 241.995112] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI [ 242.028198] PM: noirq resume of devices complete after 76.928 msecs [ 242.028313] PM: early resume of devices complete after 0.084 msecs [ 242.032981] saa7133[0]: board init: gpio is 211400 [ 242.088283] r8169 0000:02:00.0 eth0: link down [ 242.140106] saa7133[0]: probe IR chip @ i2c 0x0b: yes [ 242.140108] ------------[ cut here ]------------ [ 242.140115] WARNING: CPU: 0 PID: 3075 at /home/abuild/rpmbuild/BUILD/kernel-desktop-3.11.10/linux-3.11/kernel/kmod.c:148 __request_module+0x1eb/0x2e0() [ 242.140146] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc oid_registry bnep bluetooth rfkill fuse saa7134_alsa tda1004x saa7134_dvb videobuf_dvb dvb_core rc_flydvb ir_kbd_i2c nvidia(PO) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device snd sr_mod soundcore tda827x tda8290 tuner snd_page_alloc saa7134 v4l2_common videodev kvm_amd cdrom joydev kvm pcspkr serio_raw rc_core k10temp videobuf_dma_sg videobuf_core edac_core tveeprom edac_mce_amd ata_generic pata_atiixp sp5100_tco i2c_piix4 r8169 mii shpchp acpi_cpufreq mperf button wmi sg dm_mod autofs4 btrfs raid6_pq zlib_deflate xor libcrc32c processor thermal_sys ohci_pci scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh [ 242.140149] CPU: 0 PID: 3075 Comm: kworker/u12:21 Tainted: P O 3.11.10-7-desktop #1 [ 242.140149] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./M3A785GM-LE/128M, BIOS P1.10 11/26/2009 [ 242.140153] Workqueue: events_unbound async_run_entry_fn [ 242.140155] 0000000000000009 ffffffff8159ff82 0000000000000000 ffffffff81050eb2 [ 242.140157] ffffffffa02281d3 ffff8800779e7c58 0000000000000001 ffff880077314268 [ 242.140158] ffffffffa0228250 ffffffff8106794b ffffffff81e7ec48 0000000000000046 [ 242.140159] Call Trace: [ 242.140169] [] dump_trace+0x88/0x310 [ 242.140172] [] show_stack_log_lvl+0xd0/0x1d0 [ 242.140174] [] show_stack+0x1c/0x50 [ 242.140178] [] dump_stack+0x50/0x89 [ 242.140181] [] warn_slowpath_common+0x72/0x90 [ 242.140185] [] __request_module+0x1eb/0x2e0 [ 242.140191] [] v4l2_i2c_new_subdev_board+0x2e/0xe0 [v4l2_common] [ 242.140199] [] v4l2_i2c_new_subdev+0x5e/0x80 [v4l2_common] [ 242.140205] [] saa7134_board_init2+0x54c/0xd20 [saa7134] [ 242.140210] [] saa7134_resume+0xe5/0x1c0 [saa7134] [ 242.140214] [] dpm_run_callback+0x38/0x80 [ 242.140217] [] device_resume+0xb6/0x1e0 [ 242.140220] [] async_resume+0x14/0x40 [ 242.140222] [] async_run_entry_fn+0x2d/0x120 [ 242.140225] [] process_one_work+0x168/0x490 [ 242.140228] [] worker_thread+0x114/0x3a0 [ 242.140231] [] kthread+0xaf/0xc0 [ 242.140234] [] ret_from_fork+0x7c/0xb0 [ 242.140237] ---[ end trace b546c3f865747b8c ]--- [ 242.338316] ata2: SATA link down (SStatus 0 SControl 300) [ 242.338351] ata3: SATA link down (SStatus 0 SControl 300) [ 242.338402] ata6: SATA link down (SStatus 0 SControl 300) [ 242.338427] ata5: SATA link down (SStatus 0 SControl 300) [ 242.338474] ata4: SATA link down (SStatus 0 SControl 300) [ 242.430849] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 242.430851] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 242.430853] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 242.436797] ata8.00: configured for UDMA/33 [ 251.936301] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 252.075395] ata1.00: configured for UDMA/133 [ 252.078102] sd 0:0:0:0: [sda] Starting disk [ 253.061271] PM: resume of devices complete after 11023.775 msecs [ 253.061577] PM: Finishing wakeup. [ 253.061578] Restarting tasks ... done. [ 253.537960] ndiswrapper version 1.58 loaded (smp=yes, preempt=yes) [ 253.678963] usbcore: registered new interface driver ndiswrapper