Openelec 3.2.4
HTS Tvheadend 3.4.27~gfbda802

Jan 04 12:50:00.539 subscription: "HTTP" unsubscribing from "SBS HD"
Jan 04 12:50:00.564 HTTP: 192.168.0.23: using ticket 0298094FC8827A19DE14ED9078E7D1A4B57331C6 for /stream/channelid/3
Jan 04 12:50:00.565 Service: Subscription "HTTP": Skipping "NXP TDA10048HN DVB-T/SBS Melbourne: 536,625 kHz/SBS HD" -- not enabled
Jan 04 12:50:00.565 Service: Subscription "HTTP": Skipping "NXP TDA10048HN DVB-T/SBS Melbourne: 536,625 kHz/SBS HD" -- not enabled
Jan 04 12:50:00.565 subscription: No transponder available for subscription "HTTP" to channel "SBS HD"
Jan 04 12:50:00.565 webui: Couldn't start streaming /stream/channelid/3?ticket=0298094FC8827A19DE14ED9078E7D1A4B57331C6, No service enabled
Jan 04 12:50:00.566 subscription: "HTTP" unsubscribing from "SBS HD"


Loglevel debug: enabled
Jan 04 12:54:45.951 web interface: Service probe started on "DiBcom 7000PC"
Jan 04 12:54:49.022 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:54:49.022 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:54:49.025 dvb: "/dev/dvb/adapter0" tuning to "Nine Network Australia: 191,625 kHz" (Autoscan)
Jan 04 12:54:49.573 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:54:49.578 uk_freesat: install table handlers
Jan 04 12:54:49.579 eit: install table handlers
Jan 04 12:54:49.632 eit: begin processing
Jan 04 12:54:50.592 eit: processing complete
Jan 04 12:54:52.428 eit: processing complete
Jan 04 12:55:10.021 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:55:10.022 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:55:10.025 dvb: "/dev/dvb/adapter0" tuning to "ABC Melbourne: 226,500 kHz" (Autoscan)
Jan 04 12:55:10.615 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:55:10.620 uk_freesat: install table handlers
Jan 04 12:55:10.620 eit: install table handlers
Jan 04 12:55:10.646 eit: begin processing
Jan 04 12:55:12.021 dvb: /dev/dvb/adapter1 stopping thread
Jan 04 12:55:12.022 dvb: /dev/dvb/adapter1 stopped thread
Jan 04 12:55:12.025 dvb: "/dev/dvb/adapter1" tuning to "Nine Network Australia: 191,625 kHz" (Autoscan)
Jan 04 12:55:12.575 dvb: /dev/dvb/adapter1 started dvr thread
Jan 04 12:55:12.580 uk_freesat: install table handlers
Jan 04 12:55:12.580 eit: install table handlers
Jan 04 12:55:12.606 eit: begin processing
Jan 04 12:55:13.496 eit: processing complete
Jan 04 12:55:13.977 eit: processing complete
Jan 04 12:55:27.023 epg: expire event 829956 from ABC2 / ABC4
Jan 04 12:55:27.023 epg: now/next 829959/829962 set on ABC2 / ABC4
Jan 04 12:55:27.023 epg: arm channel timer @ 1388801392 for ABC2 / ABC4
Jan 04 12:55:27.023 epg: inform HTSP of now event change on ABC2 / ABC4
Jan 04 12:55:33.021 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:55:33.022 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:55:33.024 dvb: "/dev/dvb/adapter0" tuning to "184,500 kHz" (Autoscan)
Jan 04 12:55:33.024 dvb: /dev/dvb/adapter1 stopping thread
Jan 04 12:55:33.025 dvb: /dev/dvb/adapter1 stopped thread
Jan 04 12:55:33.051 dvb: "/dev/dvb/adapter1" tuning to "ABC Melbourne: 226,500 kHz" (Autoscan)
Jan 04 12:55:33.706 dvb: /dev/dvb/adapter1 started dvr thread
Jan 04 12:55:33.711 uk_freesat: install table handlers
Jan 04 12:55:33.711 eit: install table handlers
Jan 04 12:55:33.719 dvb: "ABC Melbourne: 226,500 kHz" on adapter "DiBcom 7000PC", status changed to Bursty FEC
Jan 04 12:55:33.805 eit: begin processing
Jan 04 12:55:34.009 dvb: "ABC Melbourne: 226,500 kHz" on adapter "DiBcom 7000PC", status changed to Constant FEC
Jan 04 12:55:36.340 eit: processing complete
Jan 04 12:55:43.009 dvb: "ABC Melbourne: 226,500 kHz" on adapter "DiBcom 7000PC", status changed to Bursty FEC
Jan 04 12:55:44.009 dvb: "ABC Melbourne: 226,500 kHz" on adapter "DiBcom 7000PC", status changed to OK
Jan 04 12:55:53.010 dvb: "/dev/dvb/adapter0" tuning to "Seven Network: 177,500 kHz" (Autoscan)
Jan 04 12:55:53.558 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:55:53.563 uk_freesat: install table handlers
Jan 04 12:55:53.563 eit: install table handlers
Jan 04 12:55:53.590 eit: begin processing
Jan 04 12:55:56.021 dvb: /dev/dvb/adapter1 stopping thread
Jan 04 12:55:56.022 dvb: /dev/dvb/adapter1 stopped thread
Jan 04 12:55:56.024 dvb: "/dev/dvb/adapter1" tuning to "184,500 kHz" (Autoscan)
Jan 04 12:56:06.962 eit: processing complete
Jan 04 12:56:16.009 dvb: "/dev/dvb/adapter1" tuning to "Network TEN: 219,500 kHz" (Autoscan)
Jan 04 12:56:16.561 dvb: /dev/dvb/adapter1 started dvr thread
Jan 04 12:56:16.567 uk_freesat: install table handlers
Jan 04 12:56:16.567 eit: install table handlers
Jan 04 12:56:16.606 eit: begin processing
Jan 04 12:56:23.607 eit: processing complete
Jan 04 12:56:26.021 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:56:26.022 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:56:26.024 dvb: "/dev/dvb/adapter0" tuning to "Network TEN: 219,500 kHz" (Autoscan)
Jan 04 12:56:26.571 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:56:26.577 uk_freesat: install table handlers
Jan 04 12:56:26.577 eit: install table handlers
Jan 04 12:56:26.585 dvb: "Network TEN: 219,500 kHz" on adapter "DiBcom 7000PC", status changed to Bursty FEC
Jan 04 12:56:26.603 eit: begin processing
Jan 04 12:56:33.412 eit: processing complete
Jan 04 12:56:36.022 dvb: "Network TEN: 219,500 kHz" on adapter "DiBcom 7000PC", status changed to OK
Jan 04 12:56:43.022 dvb: /dev/dvb/adapter1 stopping thread
Jan 04 12:56:43.022 dvb: /dev/dvb/adapter1 stopped thread
Jan 04 12:56:43.025 dvb: "/dev/dvb/adapter1" tuning to "Seven Network: 177,500 kHz" (Autoscan)
Jan 04 12:56:43.569 dvb: /dev/dvb/adapter1 started dvr thread
Jan 04 12:56:43.574 uk_freesat: install table handlers
Jan 04 12:56:43.574 eit: install table handlers
Jan 04 12:56:43.583 dvb: "Seven Network: 177,500 kHz" on adapter "DiBcom 7000PC", status changed to Bursty FEC
Jan 04 12:56:43.586 eit: begin processing
Jan 04 12:56:53.022 dvb: "Seven Network: 177,500 kHz" on adapter "DiBcom 7000PC", status changed to OK
Jan 04 12:56:53.023 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:56:53.024 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:56:53.026 dvb: "/dev/dvb/adapter0" tuning to "Nine Network Australia: 191,625 kHz" (Autoscan)
Jan 04 12:56:53.572 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:56:53.577 uk_freesat: install table handlers
Jan 04 12:56:53.577 eit: install table handlers
Jan 04 12:56:53.617 eit: begin processing
Jan 04 12:56:54.466 eit: processing complete
Jan 04 12:56:56.974 eit: processing complete
Jan 04 12:57:14.022 dvb: /dev/dvb/adapter0 stopping thread
Jan 04 12:57:14.022 dvb: /dev/dvb/adapter0 stopped thread
Jan 04 12:57:14.025 dvb: "/dev/dvb/adapter0" tuning to "ABC Melbourne: 226,500 kHz" (Autoscan)
Jan 04 12:57:14.615 dvb: /dev/dvb/adapter0 started dvr thread
Jan 04 12:57:14.620 uk_freesat: install table handlers
Jan 04 12:57:14.620 eit: install table handlers
Jan 04 12:57:14.646 eit: begin processing
Jan 04 12:57:16.021 dvb: /dev/dvb/adapter1 stopping thread
Jan 04 12:57:16.022 dvb: /dev/dvb/adapter1 stopped thread
Jan 04 12:57:16.024 dvb: "/dev/dvb/adapter1" tuning to "Nine Network Australia: 191,625 kHz" (Autoscan)
Jan 04 12:57:16.582 dvb: /dev/dvb/adapter1 started dvr thread
Jan 04 12:57:16.588 uk_freesat: install table handlers
Jan 04 12:57:16.588 eit: install table handlers
Jan 04 12:57:16.627 eit: begin processing
Jan 04 12:57:17.353 eit: processing complete
Loglevel debug: disabled